How to remove the filter screen of Gree air conditioner

Updated on Financial 2024-08-15
3 answers
  1. Anonymous users2024-02-16

    1. Remove the air filter.

    Press the direction of the arrow at the same time to pull the panel open at an angle at both ends, and then pull the air filter down to remove it.

    2. Clean the air filter.

    Vacuum the filter or rinse it with water, if the filter is dirty (e.g. oily), it can be washed with warm water (below 45) dissolved in neutral detergent, and then left in a cool place to dry.

    Note: Do not wash with hot water above 45 to avoid fading or deformation. Never dry on a fire, the filter will catch fire or deform.

    3. Install an air filter.

    Press the arrow to install the air filter, and then press the arrow to fasten the panel cover.

    Note: When the air conditioner is dusty in the environment, the number of air filter cleaning times should be increased accordingly.

    After removing the filter, do not touch the fin part of the indoor unit with your fingers to avoid scratching your fingers.

  2. Anonymous users2024-02-15

    Dear, hello, I'm glad to answer for youA: How to remove the filter screen of the Gree air conditioner landline 1, first of all, find an inconspicuous groove on the side of the air conditioner, buckle it with your fingers, and open the air conditioner cover with the force on both sides. 2. When you open the air conditioner cover, you will find that the filter inside is covered with dust and dirt, so it must be cleaned, otherwise more bacteria will breed.

    3. If you look closely at the bottom of the filter, you should find a very short convex buckle. The filter is stuck inside. 4. Push the black button of the filter up.

    Due to the softness of the strainer, the black strainer can be removed. But be careful, because it's all dust. 5. For the removed filter screen, rinse it with water several times, and then carefully clean it with a soft brush after the rubber cavity to remove dust and sundries, but do not clean it with chemical cleaning supplies, so as not to damage the filter screen due to unclean cleaning.

    6. After cleaning, the filter screen should be dried. Once the filter is dry, reinstall it as in the previous steps.

  3. Anonymous users2024-02-14

    The steps to remove the Gree air conditioner filter are as follows:

    Tool: Gree KFR-35GW.

    1. Before disassembling and washing, unplug the power supply to avoid safety accidents.

    2. Carefully open the air conditioning shell, generally the air conditioning shell is stuck with two small card slots, and gently pull the outer cover outward. After opening the outer cover of the air conditioner, there are often two buckles inside, and it is necessary to gently pick open the outer cover to fully open.

    3. The filter screen is relatively easy to take, but it is stuck by a few card slots, first push the filter screen up, and after the lower end is separated from the card slot, then gently drag the simple filter screen down to the field to complete the disassembly.

    Precautions for air conditioner maintenance

    1. Don't pull the plug directly.

    In fact, everyone makes this mistake, and many people just unplug it after not using it, and then they don't pay attention to the air conditioner anymore. In fact, there is one thing we need to do before unplugging the plug, which is to adjust the air conditioner to the air supply mode, the purpose is to dry the water on the evaporator and the water tray inside, and let the air conditioner run for about 2 hours, and then unplug it, which will be better.

    2. Air conditioning cleaning agent.

    Of course, we have to use a professional cleaner to clean the air conditioner, we used the air conditioner for a summer, and it is possible that the air conditioner has not been cleaned after it was bought, and there must have been a lot of dust falling inside. After turning on the air conditioner, germs can also run into the air. It is important to remember that the air conditioner must be cleaned and maintained after it is not in use, and it can be regarded as planning for future use.

    Clean the air conditioner filter with clean water, remove bacteria with air conditioner cleaning agent, dry it and then install it, so that the air conditioner is cleaned.

    3. Use an air conditioning cover.

    After the air conditioner is not in use, we can not take it off and save it, but it can only be hung in the original position, so that a lot of dust will fall, and it will also affect the service life of the air conditioner.

Related questions
9 answers2024-08-15

Gree air conditioner. To remove and clean the filter, you need to open the outer cover, lift the filter card, and buckle it. The following are the specific steps on how to clean the Gree air conditioner filter: >>>More

18 answers2024-08-15

Cut off the power supply. 2.The tool that can be used is a screwdriver. >>>More

11 answers2024-08-15

1. Before disassembling the air conditioning filter, carefully open the air conditioning shell, generally the air conditioning shell is stuck with two small card slots, and gently open the outer cover. >>>More

8 answers2024-08-15

The steps of Gree cylindrical air conditioner cleaning filter are as follows: >>>More

6 answers2024-08-15

1. Before cleaning, you need to disconnect the power supply of the air conditioner, and then separate the wind deflector from the whole, this step needs to be operated from both sides of the air conditioner. >>>More