There are several ways to start the needle with the yarn, and the method to start the needle with th

The first type: double needle method. This is a sweater lover's beginner to knitting sweaters.

It is a kind of stitching method that will be used. In general, in order to make it easy to insert a needle in the first line of knitting, a double needle is used to start the head. The left thumb and index finger hold up the thread, and the right hand holds the needle to pick up the thread from the outside to the inside, then from the outside of the thumb from the bottom to the top, and then turns to the side of the index finger from the top to the bottom from the outside to the inside.

Example: This stitch can be used for knitting sweaters, curling hats, etc. I often use it to start my hat with a threaded bottom edge, because this starting method has a tighter bottom edge and is not easy to loosen. As shown in Fig

The second type: single-needle needle method. Start with a rod needle. Hold the thread up with your left thumb and forefinger, and pick up the thread from the outside to the inside with the needle in your right hand, then clockwise.

Turn an angle to the right, then the thread on the needle crosses the first socket, then pick up the thread on the index finger from the bottom up, and then press the needle from top to bottom on the line of the thumb, pick out the side of the index finger, and complete the second socket. Repeat this and so on, and take even number of stitches. After the needle is raised, two rows are knitted.

Example: This stitch can be used to weave threaded edges, like a machine start, and is generally used for knitting sweater jackets.

The third type: crochet needle method. Hook a row of braids with another colored thread, and then use wool thread to pick out the socket on one side of the braid. Weave the fabric in turn. This stitching method is generally suitable for two-way knitting.

Example: This stitch method is generally used for horizontal weaving of clothing, after one side is finished, remove the other color thread and weave the other side

There are 3 kinds of wool needles, one is a set needle, one is a flat needle, and the other is a needle.

1. Prepare the wool and wool needles to practice needle starting.

2. Tie the yarn into a slipknot and thread the needle into it.

3. Weave a lower needle in this coil.

4. Put the knitting needle on the wool needle, so that there are 2 coils on the needle.

5. Repeat the operation for 11 stitches. It is better to start the singular, it is easier to weave.

6. Then start knitting the upper and lower needles. A total of three rows of upper and lower needles should be woven.

7. When the first row of knitting needles is done, knit it down, and pick up the needle without weaving.

8. When the second row weaves the upper and lower needles, knit on the upper and lower needles, and pick the needles without weaving.

9. When the third row of needles is up and down, it is the same as the first row, and the upper needles are not knitted under the knitting.

10. After the three rows of upper and lower needles are woven, weave flat needles, knit needles on the front, and knit needles on the reverse side. After weaving a length, you can see that this is very simple and practical.

The method of starting the yarn is as follows:

1. Prepare the wool and wool needles to practice needle starting.

2. Tie the yarn into a slipknot and thread the needle into it.

3. Weave a lower needle in this coil.

4. Put the knitting needle on the wool needle, so that there are 2 coils on the needle.

5. Repeat the operation for 11 stitches. It is better to start the singular, it is easier to weave.

6. Then start knitting the upper and lower needles. A total of three rows of upper and lower needles should be woven.

7. When the first row of knitting needles is done, knit it down, and pick up the needle without weaving.

8. When the second row weaves the upper and lower needles, knit on the upper and lower needles, and pick the needles without weaving.

9. When the third row raises the needle up and down, it is the same as the first row, and the needle is not knitted in the past.

10. After the three rows of upper and lower needles are knitted, the source touches the flat needle, the front knits the needle, and the reverse side knits the needle. After weaving a length and then looking, you can crack the jujube to see that it is very simple and practical to start the needle.

Yarn classification: 1) Coarse yarn: the thread density of strands is about 400 specials, generally 4 strands, and the density of each strand is about 100 specials.

High-grade coarse wool yarn of pure wool is spun from fine wool and is expensive. Medium coarse wool threads of pure wool are made of medium wool. This kind of woolen yarn is thicker, has good strength, and has a plump feel.

The knitted sweater is thick and warm, and is generally used as winter clothing.

2) Fine hair: the density of strands is 167 398 special, and generally 4 strands. There are two types of products: twisted yarn and ball yarn (fluffy yarn).

This kind of hair line is dry and smooth, soft to the touch, and beautiful in color. It is mainly used to weave thinner sweaters, light and fitted, used in spring and autumn, and the amount of wool is more economical.

3) Pattern wool: This product has a wide variety of colors and varieties, and the varieties are constantly renewed. For example, gold and silver clips, printed clips, large and small beads, circle lines, bamboo slubs, chains and other varieties. After knitting into sweaters, each has a special charm.

4) Knitted wool: generally 2 single yarn strands, mostly used for knitting. This kind of knitted sweater is characterized by lightness, cleanliness, softness and smoothness.

The method of starting the yarn is as follows:

1. First wrap the yarn around a circle, and then take out the head from the circle and pull it into a knot, which is a slipknot.

2. This knot is stupid on the sweater needle, this is the first needle. Use another sweater needle to go through the town, take the bottom line and pull it out in a circle, this is the second needle.

3. Put the second sheet on the original needle. Then use the sweater needle in your right hand to pass between the two stitches, and pull out one stitch, which is the third stitch.

4. Each time it is threaded with a needle from the side of the first needle, or the needle can be passed through from the opposite side and then knit a needle, which is the difference between the upper and lower needles.

5. If you want to knit a sweater, you can wrap three needles around it, so that you can knit it into a cylinder.

Weaving can beautify people's lives, and modern scientific research has confirmed that weaving regimens are, to some extent, an effective way to balance the body and mind. Knitting sweaters allows you to think while knitting, which can relieve fatigue and stabilize your mood.

When people encounter annoyance, pick up the knitting needle, wool, according to their own needs to weave a beautiful ginseng room, will feel physically and mentally refreshed, undoubtedly for cattle raising in addition to the great benefit, weaving hand clothes through the fingers, arms, the back of the pen outside the rhythmic round movement, so that the muscles of each part of the exercise, promote human blood circulation.

Here's how to get a sweater:

1. Hold the rod needle in the left hand, hang the end of the thread connected to the thread ball on the index finger of the right hand, hang the end of the thread on the thumb of the right hand, and gently hold the two threads with the remaining three fingers of the right hand. The tip of the needle is threaded into the thread on the thumb of the right hand from the outside in, and the thread of the index finger of the pure right hand is lifted from the outside to the inside on the rod needle. Repeat this until you reach the desired number of stitches.

2. Hold the rod needle in the left hand, hang the thread with the right hand, and use the rod needle to reach in from the left side of the left hand line, and pick up the thread, and the rod needle is located in the middle of the left hand line.

3. If there is only one color sweater, repeat the above steps and continue to weave the pattern you use until the end. If you want to change several different colors, you can knit the first color to your desired length this way. Cut the yarn with scissors when you finish to the length of the color you want, but make sure to leave enough for about 15 cm of thread.

4. Add a second color on the basis of the first suit you choose, align the second color you choose at the end of the first color wool and tie a knot, put them together on your left hand, and start weaving at the position of the new thread.

5. Start knitting with the second color wool and hook it to the width you want. The upper and lower needle lifting method can be used to create an elastic bottom edge. This is very comfortable to wear, both warm and easy to move. This is a fingerless glove that is made up, and it is this method of removing the needle.