The automatic powder wall machine and the automatic wall spraying machine are easy to use

The working effect is 10 times that of manual double motor and three motor split operation, the powder wall is completed independently, the adhesion is strong, the efficiency is high, the degree of mechanized construction is high, and there will be no empty skin The wall plastering machine is used to wipe the wall This method is time-saving: the wall plastering machine lifts and falls at a uniform speed and is stable, and does not drop ash, which can reduce the on-site operation of workers, and the construction speed is fast, the seismic performance is strong, and the water is saved. The plastering machine and the powder wall machine have a small size.

Practice has proved that the operation is simple, the integrity of the engineering structure is good, the power saving, the drum is not empty, and the material is saved, so the mix ratio is easy to grasp correctly, and the process is simple. It is conducive to improving the level of industrialization, reducing wet operations, saving time, using the automatic wall plastering machine in the construction industry, reducing costs, no floor ash, and the wall is smooth and clean, ensuring that the cost of plastering the wall is reduced, labor-saving, operation, long service life and other advantages.

Keshimei automatic interior wall plastering machine, easy to move: widely used in house interior wall decoration and material saving.

Automatic painting machine is a common name for automatic spraying machine. Automatic spraying machine is a professional term for an automatic painting machine, but it is not the same as a paint booth and a paint booth. A paint booth is a large room designed and manufactured for the painting of workpieces.

The automatic paint spraying machine is designed for the mesh spray paint process processing industry, the person holds the paint spray gun in the form of manual to realize the surface of the sprayed object through the mold cover or directly spray the color, and the automatic paint spraying machine can be completed automatically, and can replace the mold or clean the mold at the same time, clean the paint spray gun, designed with a safety door, dust cover and protective window to isolate the paint dust in the paint spraying room, avoid the adverse effects of paint dust on the operator, improve product quality, greatly improve production efficiency, reduce raw material consumption and save costs, Improve the working environment of employees, ensure the health of employees, and solve the problem of external environmental pollution; It embodies the three characteristics of high efficiency, energy saving and environmental protection. Product type.

There are many types of automatic painting machines: simple painting machines, loose gun painting machines, clamp paint spraying machines, edge mold painting machines, chromium carbide automatic spraying manipulators, tungsten carbide spraying manipulators, supersonic automatic spraying manipulators, automatic spraying manipulators, two-axis or multi-axis reciprocating spraying machines, X-Y axis spraying manipulators, glue spraying machines, arc spraying machines, high-pressure airless paint spraying machines, two-component paint spraying machines, microcomputer integrated automatic spraying equipment and so on.

In the production process of the powder wall machine, it has the function of lifting slurry, the adhesion of the powder wall is stronger than that of manpower, and the powder wall machine basically has no landing ash, saving water and materials, saving 25%-30% more materials than manual materials, reducing the cost of painting by about 30%, and reducing the labor intensity of craftsmen by 50%. The use of powder wall machine is fast, which greatly improves work efficiency, shortens the project date, and the project quality is relatively high.

Different machines have different uses, depending on your main needs. There are a lot of them on the Internet, and these two of the three flags have you to search online to see the main uses and then choose.

Is the automatic powder wall machine any good?

It is easy to use and can save manpower and resources.

What is a powder wall machine.

Powder wall machine is also known as: plastering machine, plastering machine. It is a kind of machine that can be specially plastered on the wall, the winch that is installed with vertical gantry frame and opposite scraper frame through the top of chassis, the hopper that is above the chassis and connected with the chassis is installed on the inner side of the two columns of the scraper frame, the hopper can be attached to the two columns by the winch by the winch, one side of the gantry frame is provided with a discharge port on the upper part of the head façade at one end of the hopper, and the lower part of the discharge port is provided with a scraper; In the hopper, there is a dial roller along its width direction, and the motor is connected with the dial roller through a reducer, and the other end of the hopper is provided with a feeding port.

The dial roller dials the material to the scraper, and the winch makes the hopper lift, and the paint can be evenly scraped on the wall, and the above-mentioned wall plastering machine is simple in structure, easy to operate, saves time and effort, can ensure the quality of plastering, is safe and efficient. Take an automatic wall plastering machine with a scraper width of 1 meter as an example, its application efficiency is more than 8 times that of manual work.

Advantages of Powder Wall Machine::

Advantage 1: The use of hydraulic jacking, the way of topping solves the problem of poor positioning, and the positioning is fast, it only takes about 10 seconds to be vertically flattened and fixed.

Advantage 2: The combination of two branches and traditional dotting solves the problems of slow laser positioning, difficult positioning and large error.

Advantage 3: The use of the conveyor belt to transport the ash forward and upward combined with the large plastering plate that can change the angle, completely wiped to the top, not a millimeter is left.

Advantage 4: The use of vibrator to enlarge the plastering board solves the problem of artificial plastering of the wall is prone to hollowing and cracks, and the maximum plastering thickness can reach 3 cm and the minimum plastering thickness of the wall absorbing water.

Advantage 5: The use of a trowel that can change the angle solves the problem that the machine cannot descend the calender along the same path.

Advantage 6: The use of the plugging rod is more convenient for your free docking of different heights, and also solves the problem that the telescopic rod can not pass through the construction hole, and the machine goes to the construction site, and the vertical rod can be used without assembly. Unplug the pole and transport it without disassembly.

Advantage 7: The conveyor belt of the machine can be stopped alone, such as sending ash after the construction surface, and then wiping the construction surface.

Advantage 8: The smallest side of the machine is only 60cm wide and weighs 98kg, so even a small bathroom at home can be done.

Advantage 9: With the matching limit clamp, you can wipe the lintel below the lintel when you get stuck to the same height as the lintel. In the same way, you can wipe below the window by holding down the two levers that change the angle of the trowel with both hands to the bottom of the window.

Advantage 10: The trowel is designed to be wider than the fuselage, so the yin corner is easy to be in place, and the yang corner is in place.

The method of plastering the wall with the wall plastering machine is adopted, the process is simple, the construction speed is fast, the integrity of the engineering structure is good, the seismic performance is strong, the wet operation is reduced, and the degree of mechanized construction is high. It has been proved that the use of automatic wall plastering machines in the construction industry makes the mix ratio easy to grasp correctly and can reduce the on-site operation of workers. It is conducive to improving the level of industrialization and ensuring that the cost of plastering the wall is reduced.

Keshimei automatic interior wall plastering machine: widely used in house interior wall decoration, time-saving, labor-saving, material-saving, the working effect is 10 times that of labor.

Dual-motor and three-motor split operation: the wall plastering machine lifts and falls at a constant speed and is stable, the operation and powder wall are completed independently, and the wall surface is flat and bright, no ash and no hollowing. Plastering machine powder wall machine has small size and easy to move

Simple operation, high efficiency, material saving, time saving, power saving, water saving, cost reduction, strong adhesion force, no floor ash, long service life and other advantages, there will be no empty skin.

It's still easy to use! But it depends on personal luck! Appliances are like that.

It is not easy to use, friends who have used it all know, the wall plastering machine is inconvenient to move, it is difficult to level, there is a stubble between the two touches, the ground is uneven and can not be used, it is a theoretical machine, there is no mortar spraying machine to use, and now a few mortar machines are used, which is faster than manual.

I want to buy a fully automatic stucco wall machine, I don't know if there is any benefit in using it? Please give me some pointers from a friend who has used it, and I can tell you very pertinently, such a device is basically a garbage piece.

One plastering machine can work for 10 craftsmen: no scaffolding, saving the cost of building shelves.

The project date can be greatly advanced: a single project can achieve excellent projects.

Verticality, flatness, and less than manual error: reduce the labor intensity of craftsmen and improve work efficiency.

Dual-motor split operation: the lifting speed is stable and stable, the operation and powder wall are completed independently, and the wall surface is flat and bright.

No floor ash: save water and materials, save about 20% of ash than manual materials, and reduce construction costs by about 1%.

Lightweight and flexible: It is widely used in the interior and exterior decoration of the house, saving time, labor and materials, greatly reducing the labor intensity of workers and improving work efficiency.

The adhesion force is stronger than that of artificial strength: with slurry lifting function in the production process, 2 people can produce 400m2 interior walls a day.

It's easy to use, I use three qi brand on the construction site.

Yes**, don't buy it, the effect of the powder is very poor, and it needs to be smoothed manually in the later stage, which is not as good as artificial, and it is a completely useless product!! Everyone, be on alert! It's a complete scrap! Deceiving!

Friends, don't be fooled, it's not easy to use.

There are many brands of wall plastering machines on the market, but not every brand of product is simple to operate and has good results.

The operation process of the plastering machine:

1. The problem of poor positioning is solved by using hydraulic jacking and topping, and the positioning is fast, and it only takes about 10 seconds to be vertically flattened and fixed.

2. The combination of two branches and traditional dotting solves the problems of slow laser positioning, difficult positioning and large error.

3. The use of vibrator to increase the plastering board solves the problem that the artificial plastering wall is prone to hollowing and cracks, and the maximum plastering thickness can reach 3 cm and the minimum plastering thickness of the wall can reach 3 cm.

4. The use of a trowel that can change the angle solves the problem that the machine cannot descend and calender along the original road.

5. The working surface of the machine is 80 centimeters wide, and a wall is wiped like this to leave a centimeter wide, you only need to fill one side, no need to adjust or seal. Because it has been in the sand and ash for a long time, any adjustment and blocking is impossible.

6. The conveyor belt of the machine can be stopped alone, such as sending ash after the construction hole, and then wiping the construction hole.

7. Use the matching limit clamp to the same height as the lintel to wipe the lintel below. In the same way, press and hold the two levers that change the angle of the trowel to the bottom of the window with both hands to wipe below the window.