How to make a belt with a slip buckle from cowhide by hand?

First of all, you need to choose a more delicate cowhide, in fact, you can go to the store to buy a movable buckle when making a sliding buckle, and then choose to make a small hole yourself.

I think it's very simple, there are a lot of tutorials on the Internet, as long as you search for it.

You can prepare a cowhide yourself first, and then go to a special master to learn with her.

Buy a belt head, draw it to size, cut it out, install the belt head, and you're good to go.

Width of inches or more, it is recommended to use a large spatula. Of course, if you have good skills or the presser foot of the shovel is better, you can also use a small shovel, but it is a waste of time, and it is best to use the shovel only after it can be completed at one time.

This requires technicality, so it's better to find professional personnel, after all, it's a belt, and it's embarrassing to do it badly.

First of all, you must prepare the tools for making a belt and a good cowhide, a belt made of bad cowhide is definitely not good, and then tie a proper hole in the cowhide.

Individuals can buy a good cow beer in the belt shop, and then remove impurities according to their waist circumference to fit their holes.

Now there are indeed fewer handmade cowhide belts, in fact, it is quite simple, and the length is suitable for piercing a few holes.

First of all, the head must be fitted, and then the eye should be drilled according to the waist circumference.

The quality of the cowhide is very important, and the belt must be designed as simple as possible.

It may not be easy to use it to make a belt from real cowhide, and those made of cowhide shoes are processed, and real cowhide is very smelly.

The belt smooth buckle buckle head has a small protruding pillar, and the belt body is worn from the lower ring of the buckle when used, and the buckle head pillar is directly buckled on the eyelet, and the belt body that grows out can be hidden in the belt. The sheepskin is softer and lighter after being peeled and layered, and the belt made of positive leather has a beautiful texture, soft and natural luster, and the toughness of the sheepskin belt is worse than that of cowhide. <

The belt smooth buckle buckle head has a small protruding pillar, and the belt body is worn from the lower ring of the buckle when used, and the buckle head pillar is directly buckled on the eyelet, and the belt body that grows out can be hidden in the belt.

Belt Cortex Type:

1. Crocodile skin: known for its luxury and rarity. Crocodile skin is full of wild texture and tough quality and many other advantages, coupled with the scarcity of leather production, extremely complex production process and other factors, so that the crocodile leather belt is expensive, but these can not stop people from loving it, many high-end leather brands will have several crocodile leather top products rock pure pressure array.

2. Cowhide. Cowhide products have a kind of stiff texture, the embossing and natural texture effect on the belt make the belt more attractive, plus the cowhide toughness, strong and durable, the best of the cowhide belt is relatively expensive.

3. Sheepskin. The sheepskin is more soft and light after being peeled off and layered, and the belt made of it has a beautiful texture, soft and natural luster, and the toughness of the sheepskin belt is worse than that of cowhide.

4. Pigskin. The pores on the surface of pig leather are round and coarse, three are juxtaposed in a group, arranged in a triangle, each group is far apart, the leather surface is uneven, and the feel is hard and rough.

5. PUPU is commonly known as artificial leather, which is one of the common belt materials, and its biggest advantage is that it is cheap, bright and diverse, and has a variety of styles, but the toughness of the leather is extremely poor, and a PU material belt can only be used for 2 to 3 months.

Leather tanning. Principle].

Leather tanning is made with tannin.

Chemical and physical processing of proteins within the skin. It goes through a series of processes and uses some chemical agents to make a series of changes in the protein in the raw hides of cattle, pigs, sheep and other animals to make collagen.

Denaturation occurs. The tanned leather is soft, strong, and hard-wearing, and not easily spoiled. Therefore, the tanned leather can be used to make various leather daily necessities. In this experiment, according to the conditions of the middle school, only the tanning process that is easy to master will be introduced.

Operation] 1) Soak 500g of dried animal skin in a bucket until soft (about 3-5 days).

2) Take out the softened skin, spread it on a flat plate, the hair side is down, and use a spatula to remove the meat and oil attached to the skin. Then take 300g of saturated lime water.

Add 50 g of sodium sulfide.

Stir well to make a hair removal.

Liquid. Use a brush dipped in the depilatory liquid and brush it on the base of the bristles on the skin plate, as evenly as possible. Then fold the skin in half, after about 3 or 4 hours, the hair on the skin is easy to fall off, then use a shovel to completely remove the hair.

3) Immediately after hair removal, rinse the skin in running water, remove most of the lime and sodium sulfide, and soak it in water for 1 2 days.

4) Prepare an iron pot and add saturated miscanthus salt.

The solution is about 2L, and the temperature of the solution is kept at about 40 by heating slightly. Remove the skin from the water, wring it out and put it in the pot. Rub the skin with your hands constantly, and then take it out after it is basically "full", let it dry, and then proceed after about half an hour.

Second, the third time to "eat nitrate", the method is the same as the first time. 500g of dry skin can "eat" about 250g of nitrate. Dry the skin after eating nitrate and remove the floating nitrate on the skin.

5) Prepare another iron pot, add 500g of clear oil (not all used up), heat to keep the oil temperature at about 40. Put the skin after "eating nitrate" into the warm oil, and keep pushing and pulling with your hands to make the oil and the skin continue to contact and evenly penetrate into the leather board. After "eating" enough oil, dry the skin on a wooden stick and let it dry naturally.

Steps: 1. Choose a piece of vegetable tanned skin, the feel should be better, the thickness is 35-40, not less than 35, or the belt will be very thin.

2. Cut off the leather. When cutting the skin, be sharp and don't shake your hands. You can cut it slower, and the trajectory should be straight and smooth.

3. After cutting the leather, you can apply a layer of horn oil on the leather surface according to your personal preferences, and then put it in the sun for 3 or 4 days, you can raise the color, and the color is very positive.

4. This step is to punch holes in the belt, first set the position, then punch, shovel edge, and finally polish, grinding is a time-consuming job, not in a hurry, grind slowly.

5. After everything above is done, you can install hardware. This belt does not need to be fitted with a belt head, all the fixing work is done by the "monk head", and except for the belt loops, the rest is basically not stitched by hand.

1 Handmade cowhide belt, simple atmosphere, the first layer of cowhide is very durable, give it to Dad