How to enter Taipower recovery

Taipower. The steps to enter recovery are as follows:

1.At the time of power off, long press the power button and the volume down button to know the tablet.

You can let go only after the boot screen appears.

2.Wait for the tablet to finish booting, and the following figure appears.

The first of these is to introduce the meaning of the button, the plus or minus key of the volume is the selection button, the power button is the OK button, the reboot is the meaning of restart, the recovery is to enter the recovery mode after clicking, and the power off is to select the recovery mode when the power is turned off.

3.The tablet will automatically enter the recovery mode, and there are 4 options in it, which are reboot, adb debugging, clear data factory settings.

and clear the cache.

Dear users, hello:

Generally, there are two ways to reset the tablet. One is that in the system, there is an option to revert to the exit settings in the settings options. One is to set the reset button on the fuselage, there are generally two ways, there are reset holes on the fuselage, you can poke it.

If not, press and hold the power button for more than ten seconds.

You can buy a telecom mobile phone in the Anhui Telecom online business hall, and the network hall will handle the contract machine to give a high phone bill, you can buy the machine at 0 yuan, which is very discounted, and at present, a number of brands of 4G models are fully listed!

There are two ways to flash the phone into third-party recovery:

Method 1: Turn on the phone and enter the system state, use the [Mobile Uncle Toolbox] software, and flash into the [third-party recovery mode], the specific steps are as follows:

On the phone that has successfully obtained root permissions, **Install the [Mobile Uncle Toolbox] software, use the [Mobile Uncle Toolbox] software, and flash into the recovery mode

1.Search for third-party files that match the signal of your personal mobile phone brand and model on the Internet (the official website of the recommended mobile phone brand, Android Netjifeng Forum, and the network disk), and copy and paste them in the mobile phone SD card card root (card root: that is, copy and paste directly in the SD card, and the file cannot be placed in the folder directory).

2.Successfully obtain the root permission of the Android system of the mobile phone.

4.Use the [Recovery] function of [Mobile Uncle Toolbox] [Import files on SD card] OK Reboot After restarting, it will automatically enter recovery mode and the flashing is completed. After entering the recovery mode, press the volume key to toggle the options; Press the power on button to confirm and perform the operation.

Method 2: When the phone is turned off.

1: Enter fastboot mode;

2: Connect the mobile phone to the computer with a data cable;

3: The computer automatically identifies the loading driver;

4: Find the recovery package, run it, and flash it into recovery.

Ways to enter recovery mode on your phone:

Method 1: If the phone is powered on, please turn it off first, and in the case of power off, press and hold the power (hang-up button) + small house (home) button at the same time until the recovery interface appears.

Method 2: If the above methods cannot be entered, then turn on the computer again, first press and hold the volume + button, and then press and hold the power power button until the recovery interface appears.