How to measure your hand and how to measure your finger circle

Circle mouth measurement own hand method:

You can wrap the paper strip around your finger, mark the intersection of the paper strips, measure the distance between the marks with a ruler and check the size chart.

You can also put a ring with a suitable ring on the ring size stick, and then read the data on the size stick.

Hello, it is a pleasure to serve you and give you the following answers: The method of measuring your own hand circle: 1

Place your hand on a piece of paper and draw a circle with a pencil at the widest point of your palm; 2.Use a ruler to measure the diameter of the circle in inches; 3.Divide the diameter of the measured circle to get the size of the mouth of the hand.

With the above steps, you can accurately measure the size of your hand ring and thus determine the appropriate glove size. Steps:1

Place your hand on a piece of paper and draw a circle with a pencil at the widest point of your palm; 2.Use a ruler to measure the diameter of the circle in inches; 3.Divide the diameter of the measured circle to get the size of the mouth of the hand.

Personal Tips:1When measuring the size of the hand ring, try to keep the palm flat to avoid the measurement of the size is inaccurate; 2.

When measuring, try to use a precise ruler to avoid inaccurate measurements; 3.When measuring, try to use inches as a unit to avoid inaccurate measurements. Related Knowledge:

Hand ring mouth size refers to the diameter of the circle at the widest point of the palm, measured in inches, and is usually used to measure the size of the palm and is an important reference standard used to determine the size of the glove.

Finger circle mouth measurement methods include leather filial hand iron wire method, rope measurement,Vernier calipers

1. When measuring the finger circle with the amount of burning iron wire, you can use the iron wire to measure a soft small iron wire, wrap a small circle of appropriate size around your hand, and then mark the junction, and after pulling the small circle into a straight line, measure the length of this iron wire.

2. Use a rope to measure, you can also use a rope to measure the size of the finger circle, take a small rope, use it to wrap around the finger, pull it into a slightly tight circle, and then draw a mark at the junction to measure the length of the rope, and you can get the circumference of the finger.

3. Use the vernier card, or use the vernier caliper, measure the size of the circle, take a ring that is usually worn on the hand, the most suitable ring, put it on the vernier caliper, measure its inner diameter length, and the resulting length is the size of the finger circle.

There are three ways to measure how big a circle your hand needs to be: try-on, string, and tape measure.

1. Try it on

Measuring the neck of your wrist allows you to try it on, and this method is often used when choosing a bracelet at the counter, where the staff at the counter will compare the customer's hand and choose the right size based on their experience.

2. String

You can measure your wrist loop with a string, put your fingers together, measure it with a string at the widest part of your hand, mark it, then measure the length with a ruler according to the mark, and finally divide the result. <>

3. Tape measure. You can measure your wrist loop with a tape measure, put your thumb at the base of your little finger when measuring, and then use a tape measure to measure the widest part of your palm, and multiply the result to get the wrist size.

Tips for choosing a bracelet:

The weight of the bracelet should be selected according to the shape of your hand and body. If you are petite, you can generally choose about 20 grams to 35 grams. If you are fatter, you can choose 30 grams to 50 grams.

In fact, if the economic conditions allow, regardless of the body shape and hand shape, you can flexibly choose a heavier ** bracelet according to the style. Because the bracelet is heavier, it is not easy to deform in daily life in the future.

Here's how:

1. Ruler measurement.

Prepare an ordinary ruler or soft ruler, measure the width and circumference of the widest part of the palm, and then refer to the comparison table to get the right bracelet ring size for you. If the length is less than 70mm, the diameter of the ring below 53mm is generally selected; The length is 70-76mm, choose 54-56mm circle diameter; The length is 76-82mm, choose 57-59mm ring diameter; If the length is more than 82mm, choose the diameter of the ring above 60mm.

2. Compass measurement.

Prepare cardboard and compass, draw a circle similar to a bracelet with a compass on the cardboard, then cut it out with scissors or a knife, try on the round cardboard to find the most suitable circle for yourself, and finally measure the diameter of the inner hollow to get the appropriate diameter of the bracelet ring.

3. Test the old bracelet.

If you have bought a bracelet before, you can directly use a ruler to measure the inner diameter of the old bracelet, on this basis, you can slightly adjust the size of the bracelet ring, if you like to wear a bracelet with more looseness, the diameter of the ring can be selected 1-2mm larger, otherwise the size will be selected 1-2mm smaller.

Precautions

When actually measuring, you can put your hand naturally flat, do not tighten, use a line around the circumference of the widest part of the palm and the circumference of the thinnest part of the wrist, if the lady with a soft hand can measure the tightness, the hand bone is hard enough to measure the line tightly, and finally measure the length of the line is the size of your hand.

The bracelet ring mouth measures your own hand in the following ways: ruler, compass.

1. Ruler

Prepare an ordinary ruler or soft ruler, measure the width and circumference of the widest part of the palm, and then refer to the comparison table to get the size of the bracelet ring that suits you, such as when the length is less than 70mm, it is generally suitable for the circle mouth below 53mm; The length is 70-76mm, suitable for 54-56mm rims.

2. Compass

Prepare cardboard and compass, draw a circle similar to a bracelet with a compass on the cardboard, then cut it out with scissors or a knife, try on the round cardboard to find the most suitable circle for yourself, and finally measure the diameter of the inner hollow to get the appropriate diameter of the bracelet ring.

How to wear the bracelet

When wearing a bracelet, there is no strict limit to the number of bracelets, you can wear one, two, three, or even more. If you wear only one, it should be worn on the left hand and not on the right hand; If you wear two, you can wear one on each hand, or both on the left hand; If you wear three, you should wear them all on your left hand, not one on one hand and two on the other.

It is rare to wear more than three bracelets, and even if you want to wear them, you should wear them on your left hand to create a strong sense of imbalance and achieve the purpose of being unconventional and extraordinary.

You can measure your own hand ring mouth size by following these steps:1Find a soft ruler or use a piece of paper and silver strips.

2.Wrap a soft ruler or strip of paper around the wrist you wish to measure, and mark a point with a pen or the crook of your fingernail to record the starting point. 3.

Make sure the ruler or slip of paper fits snugly against your wrist, but not too tightly, leaving a margin that is a finger's width. 4.Tighten the soft edge ruler or paper strip and mark a point to record the end position.

5.Use a soft ruler or tape measure to measure the distance between the start and end points, which is the length of your hand loop.

The method of measuring the hand is to stick the left palm on the left waist, use the right hand to ring out a circle with the thumb and index finger at the outer wrist, wrap the circle around the back of the left hand, and then bend the thumb and index finger back.