What kind of gentle detergent is better to clean the plastic surface of the motorcycle

There are two working principles of engine speed: 1. Mechanical: The gears in the engine drive the external flexible shaft wire to transmit the engine speed to the tachometer (mechanical tachometer). 2 electrons:

The ignition trigger inside the magneto (the engine turns for one turn, and the ignition trigger touches once) passes.

Use a sponge and household detergent will do.

1. Engine cleaner for washing motorcycles. The use of engine cleaner is very simple, and the inside of the engine can be cleaned and maintained without disassembling the engine. Engine cleaning is generally carried out when the engine oil is changed, and can be used in all kinds of gasoline vehicle engines.

2. The internal cleaning agent of the engine is to solve the formation of sludge, gum and carbon deposits inside the lubrication system.

It is an additive that can automatically clean the internal system of the lubrication system by making up a variety of components with very strong cleaning ability.

3. The main component of carbon deposition in the engine is the impurities in the gasoline, so the trend of carbon deposition in gasoline with high cleanliness is weaker. Choose a real gasoline cleaner to help remove carbon deposits from the engine, effectively prevent the formation of carbon deposits on the metal surface, and can gradually activate the original carbon particles and slowly remove them, thereby protecting the engine from damage.

Aspects to pay attention to in the washing car:

1. Don't go to the car wash shop or let others help wash the car, just like your little wife can't let others bathe him, the car wash shop seems to have complete tools to operate the sail as a standard, but the problem of poor efficiency in its pursuit of efficiency also exists, and it will also cause the cremation plug and various lines to malfunction if it is not good. Of course, second-hand motorcycles are also cleaned.

2. Be sure to cool down the hot car before washing. Suddenly washing the engine, exhaust pipe and other parts with cold water, the principle of thermal expansion and cold contraction is clear to everyone, which will destroy the oil seal of each part and cause oil leakage in the engine. It will also cause the plating layer at the junction between the exhaust pipe and the engine to peel off and oxidize and rust.

3. Headlights, left and right handrails, electric doors, exhaust pipe exhaust ports (it is best to plug them with something), horns, cremation plugs, air filters, batteries and other parts are best not to be washed directly with water, these parts have circuits, which will cause short circuit or leakage after wetting, and the lights are not lit, the horns are not sounding, they are not on fire, and they are weak to drive, so it is best to scrub them with a rag.

4. The lower part of the engine and the radiator must be cleaned when washing the car, and it is recommended to wash it with a toothbrush dipped in dish soap, which has the advantage of being both beautiful and easy to find problems such as engine oil leakage.

5. After the car is washed, the whole car should be wiped dry with a dry rag, especially the electric door, instrument, left and right handrails, cremation plugs, fuel tank caps and other parts, pay special attention to take off the cremation plug cap and shake it a few times, and shake out the water in the casing above, otherwise it will affect the ignition.

6. Start the vehicle after drying, idle the side stand for 5 10 minutes, shoot the hail to drain the water in the exhaust pipe, and then drive on the road at medium speed for a few minutes or dry in the shade, not in the sun.

7. After the car is cleaned, the shell can be sprayed with wax, wiped evenly with a fine abrasive cloth, and the chain should be re-lubricated.

8. Every time it rains and rides home to love the car into storage, pay attention to wipe the car dry, especially the exhaust pipe, now the pollution is serious, the rainwater is acidic, and most of the exhaust pipes are rotten early due to this reason, although it is troublesome, but it is definitely the way to love the car.

Do you know that these parts of the motorcycle cannot be cleaned directly with water?

Cleaning there the engine or the appearance.

Why wash it? 4-stroke or 2-stroke?

Do you know that these parts of the motorcycle cannot be cleaned directly with water?

You can clean it directly with water, or you can buy a special vehicle cleaner to clean it.

1. Brush the dust and mud on the motorcycle with water, wait for the water to dry, and then use a soft dry cloth to wipe off the water stains left on the car.

2. Squeeze the cylindrical white shoe polish (also called multi-functional shoe polish) on a clean cloth (if it is boxed, dip a little in the box with a cloth), and evenly coat all parts of the motorcycle, not too thick, otherwise the effect is not good.

3. After 3-5 minutes, rub the motorcycle repeatedly with a muslin cloth to get brighter and brighter.

Because the main ingredient in shoe polish is paraffin, the motorcycle wiped by the above method is equivalent to coating the parts with a protective layer, which can not only slow down the corrosion rate of the motorcycle surface, but also because of the smooth characteristics of the paraffin, which can not only slow down the corrosion rate of the motorcycle surface, but also because of the smooth characteristics of the paraffin, so that it is very easy to wipe the car in the future. Whip your bike every other month to polish your bike, and you're sure to keep your mount youthful and glowing.