At the airport the phone has shown wifi connection, why can t I get online

The reasons why the mobile phone is connected to wireless wifi but cannot access the Internet are:

1. The wifi itself is a problem, and the wifi may not be connected normally, resulting in the inability to access the Internet.

2. Router problems, the router may be overheated or damaged.

3. Broadband arrears may lead to inability to access the Internet.

4. The wifi name contains Chinese, resulting in some mobile phones unable to connect to the Internet.

5. There may be a problem with the mobile phone system, which may cause the connection to wifi but the Internet cannot be accessed.

Suggested workaround:

1. Use other mobile phones or devices to connect to wifi to try whether you can access the Internet, and rule out the wifi itself.

2. Restart the router to try, or restore the router to factory settings, then dial up the Internet again, and reset the wifi according to the setup wizard, or change to a new router and dial up to connect to the Internet.

3. Contact broadband customer service to confirm whether there is any abnormality in the broadband, such as arrears, recharge the broadband, and then dial up the connection.

4. If the wifi name contains Chinese, it is recommended to modify it to English or a combination of English and numbers before connecting.

5. If the above reasons are ruled out, it is likely to be a problem with the mobile phone system for a long time, it is recommended to restore the factory settings or flash the phone to see if it can solve the problem.

Now just lay the cover! Sometimes the connection is displayed but it can't be connected! You'd better go to the airport to get your ID card and passport and swipe it to get the password!

The steps for airport wifi connection are as follows: (the demonstration uses a Xiaomi 6X mobile phone, and the operation of other brands of mobile phones is about the same).

1. Slide down your phone and turn on the Wi-Fi switch.

2. Select Airport Free Wi-Fi from the list of Wi-Fi that appears.

3. Click the connected spine connection in the pop-up lead loss dialog box.

4. Finally, enter your mobile phone number, fill in the verification code you received, and click to log in.

1. There are too many users currently connected, resulting in a very slow network speed, and it takes a long time to come out of the login page.

2. The wireless wifi in many airports is not stable, and it is often impossible to connect or cannot connect to the Internet. It is advisable to reconnect or do something else after a while.

3. Open the browser directly and see if it will jump to the login page.

If it doesn't pop up, it should be that the browser is not open, and opening the browser will automatically take you to the connection page.

Why does the airport wifi display connection but it can't be used, this question is a bit "situational" to call the stool. This requires some airport wifi cover branches and layout problems.

1) The network is the wifi of the chain of things, if you are mobile, you can't. This is also a statement.

2) If it is the same wifi network company, it may not let you go online due to problems such as your permissions and payment? It is also possible that your phone cannot be online due to its own reasons or the function is implemented. --For example, if you have the permission to traffic, WeChat can be played, but browsing the web is not good.

3) The last possibility is a router that can log in to the wifi, but the routing function behind the wifi router has stopped serving? It's the same feeling of building a car, "I can't use it"!

If your phone shows that you are connected to a wireless network, but you still can't access the Internet, we recommend that you:

1.Turn off your phone, restart your router, and reconnect to your wireless network.

2.Confirm the transmission bandwidth of the router (the supported router supports 40 MHz, we recommend setting it to 20 MHz) and check whether the router network is normal.

3.Confirm that IP address filtering is set up in the router MAC address filtering.

4.If you still can't access the Internet via Wi-Fi, we recommend that you try using a static IP address.

1).If you are using the Android operating system, the method: Settings - Wireless & Network - WLAN Settings - Menu Key - Advanced - Use Static IP to check the box.

2).If you are using Android or above, you can do the following: Settings - (Connect) - WLAN - Select a wireless hotspot - Show advanced options - Tick - Swipe down the screen - IP settings - Static - IP address Gateway.

5.Connect to a different router attempt.

6.Factory reset after backing up your phone's important dataTry to: Settings - Reset Privacy - Factory Reset.

Most seating areas and public areas in the airport building can use wireless Internet access free of charge without registration. Follow these steps to connect to the Internet service

Turn off the data service to avoid data roaming charges;

Find the airport wifi name and connect it;

Then open an internet browser and type any **;

After reading the full terms and conditions, please click "Agree and Continue";

Then you can enjoy free Wi-Fi.