How to disassemble and assemble the rear seat of Dongfeng Nissan Venucia D50

Do you want to install seat covers or leather? Just lift the seat directly (it takes a little effort), and then you can see the 3 screws, and the back will be removed after unscrewing, so you don't need to say much if you install it, just do it step by step.

Disassembly method of automobile rear tail lights: 1. Automobile tail lights are mainly distributed on both sides of the rear of the vehicle, and the fastening screws are inside the vehicle; 2. Open the tailgate and see two plastic fastening buckles inside, and remove them with tools; 3. Open the interior panel to see the fastening screws inside, and remove it directly; 4. After removing it, you can see that the tail light is fixed with only one screw; 5. When taking out the tail light, pay attention to the line speed of the tail light and do not break it, and put the old tail light; 6. After the tail light is removed, you can see that the main structure is the fastening screws and lamp plugs. The rear tail light of the car comprises the lamp and the bulb in the rear of the car, wherein the function of the lamp is to aggregate the light emitted by the bulb and then emit it, so as to enhance the brightness and range of the light emitted by the bulb, and change the luminous color of the bulb through the color of the lamp.

Required: Slotted taper, T-20 spline.

Step 1: First of all, we need to prepare the tools needed to disassemble the car sun visor, a word to change the cone, a T-20 spline, and then open the car door to prepare for the next dismantling process.

2. Fold the visor by hand, first disassemble the right side stuck in the hook, take out the word change cone, and gently pry up the side of the sun visor stuck in the hook with the word change cone.

3. After prying open on the right, rotate the visor clockwise about 90 degrees by hand, at this time, we will see that there is a small white cover on the left side of the visor, take out a word change cone, use a word change cone to gently pry off this small cover, and pry the small cover that Xiangzhou grinds down to be put away for installation.

4. Next, we will see that there is a small screw inside, this screw is used to fix the sun visor, take out the T-20 spline, use the T-20 spline to remove the screw Next, this step is quite simple, everyone pay attention to the disassembled screw to put it down.

5. After the screws are disassembled, hold the left side of the visor with the left hand, hold the right side of the visor with the right hand, and then gently break down, mainly to the left, so that the visor will be separated from the big top of the car.

6. After separation, unplug the wiring harness plug inside, so that the visor will be completely disassembled, it should be noted that this wiring harness plug is very small, so when you pull it out, you must be lighter to avoid breaking the small wiring harness.

7. Dismantled sunshade, we should put it in a soft place to avoid staining or scratching the surface of the visor, encountering this kind of problem, or interested friends, try it yourself, believe in yourself, then you will be able to do a good job.

After the engine does work, it will exhaust the exhaust gas, and the quality of the exhaust efficiency is directly related to the quality of the engine performance. The original car design favors a smaller engine sound, which affects the speed of the exhaust and reduces the engine efficiency! While the intake air is increased and the combustion is intact, the exhaust efficiency needs to be strengthened.

Now it is mostly changed to straight exhaust, that is, the middle and front sections of the exhaust side fluid system are changed, and the muffler and other purification devices are removed, so that the whole process of exhaust is shortened, and the exhaust gas is discharged after simple treatment, and the acceleration of the car will be faster after improvement. The modified in-line barrel will have a deafening sound release when accelerating, but the resonance should not be too large, otherwise it will aggravate the driver's fatigue and irritability when driving the vehicle for a long time.

Headlight modification: Any vehicle can be installed as long as it matches the specifications of the car's lamp and has space for the stabilizer and wire set. When modifying HID xenon headlamps on the basis of halogen lamps, the high-pressure bag and ballast should be placed in a relatively ventilated position to facilitate heat dissipation.

It is forbidden to put high-pressure bags and ballasts in places with high heat such as engines. If the temperature reaches 105 degrees, the high-voltage pack will automatically cut off the power supply.

The Venucia D50 is based on the Dongfeng Nissan Tiida platform, and the overall outline of the D50 is similar to that of the Tiita, but the details including the headlights and taillights have different designs, and the overall visual effect is more fashionable and dynamic. In terms of body size, the length, width and height of the Venucia D50 are 4480 1695 1535mm, and the wheelbase is 2600mm. The Venucia D50 adopts a braking system with a front disc and rear drum, which is reduced compared to the front and rear disc types of the old Tiida.

The interior design of the D50 also adopts the design concept of Tii-ta, and the same home style design reflects the positioning of this car as a family car. At the same time, through the redesign of the interior button layout and some details, the interior of the D50 looks more warm and easy to operate.

Millions of car purchase subsidies.

Start the car to the right and hit the full wheels, then turn off the engine and remove the car key, then open the hood and disconnect the negative pole of the battery. Use a Phillips screwdriver to remove the four screws on the front bumper, a 5mm Allen wrench to remove the two screws on the side of the front bumper, a Phillips screwdriver and a 7mm sleeve to remove the three screws under the right wheel of the front bumper skin, and a Phillips screwdriver and a 7mm socket to remove the three screws on the fender and remove the splash guard.

Venucia D50 features:Use a small ratchet wrench, adapter and 7mm socket to remove the screws at the bottom of the front bumper, use a square screwdriver and a 7mm socket to remove the screws connecting the fender and bumper, use a large ratchet wrench and a 10mm socket to remove the four bolts behind the headlamp, remove the plug of the headlamp assembly, remove the headlamp assembly, remove the screws connecting the splashguard and the fender, and the fender can remove the three screws that use a Phillips screwdriver and a 7mm socket to remove the fender.

Start the car and hit the full wheel to the right, then turn off the engine and pull out the car key, then open the hood and disconnect the negative pole of the battery. Remove the four screws on the front bumper with a Phillips screwdriver, the two screws on the side of the front bumper with a 5mm Allen wrench, the three screws on the bottom right side of the front bumper skin with a Phillips screwdriver and a 7mm socket, and the three screws on the fender with a Phillips screwdriver and a 7mm socket to remove the splash guard.

Venucia D50 features:Use a small ratchet wrench, adapter and 7mm socket to remove the screws at the bottom of the front bumper, use a square screwdriver and a 7mm socket to remove the screws connecting the fender and bumper, use a large ratchet wrench and a 10mm socket to remove the four bolts behind the headlamp, remove the plug of the headlight assembly, remove the front opening Tongsong headlight assembly, remove the screws connecting the splashguard and the fender, and the fender can remove the three screws of the wing wheel with a Phillips screwdriver and a 7mm socket.

If you are a novice, do not disassemble it to prevent damage to your car.

1.Cut off the power supply.

To be on the safe side, be sure to cut off the power supply first. Therefore, first open the lid of the car's luggage and cut off the power supply of the vehicle to ensure that there is no electricity in the back. At the same time, in order to allow room for changing the tail lights, it is necessary to tidy up the luggage compartment.

2.Remove the dust plate on the back of the headlight.

This is a necessary step to replace the tail light, remove the dust shield on the back of the light to facilitate the replacement of the tail light. Many car lights are divided into two forms: the bulb and the lampholder are separated and the bulb and the lampholder are integrated, and we use the bulb and the lampholder separately.

3.Make a replacement.

Before replacing the taillight, identify the lamp that needs to be replaced, press and hold the rotating handle on the rear of the lamp, and unscrew it. Then replace the lights with new ones, paying attention to the type and color of the lights.

4.Install and reinstall lights and dust panels.

Once the taillights are installed, the dust shield is installed.