How to wax a car, how to wax a car

Method steps.

Waxing and car washing on cloudy days are recommended, and indoor is also possible.

Wash the car, dry it, and wait another 30 minutes.

Waxing, as long as you touch a "thin" layer is enough, horizontally or vertically or in a circle, be careful not to apply vinyl.

If you use wax like shoe polish, it will take 2 to 4 hours to dry, and the wax water will be much faster by 1 hour.

Use a dry cloth to wipe off the wax and polish it.

It takes about half a day, and half of the time is actually "waiting". Also, when waxing and wiping off the wax, it is best to use 100% cotton cloth, but you can use old cloth, and many car wash cloths can be waxed.

end precautions.

The waxing environment is clean and well ventilated.

The car should be waxed in a cool place, otherwise the temperature of the car surface is high, and the adhesion ability of the car wax will decrease, which will affect the waxing effect.

When waxing, the principle of first up and then down should be followed, that is, the roof, front and rear covers, side of the body, etc. should be applied first.

If the sponge has the same color as the car paint during waxing, it may be that the paint surface has been damaged, and the waxing should be stopped immediately and repaired.

The polishing operation should be carried out within the specified time after the waxing is completed, and the polishing should also be reciprocated in a straight line. Unpolished vehicles are never allowed to drive on the road, otherwise polishing will easily cause paint scratches.

After polishing, it is necessary to carefully inspect and remove the residual car wax from the license plate, lights, door edges, etc., to prevent corrosion.

Hello 1Car wash . Wash your car with mild soapy water to get ready for waxing. Wash the paint thoroughly and wait until it is completely dry before waxing. If there is water or dust on the paint surface, the effect of waxing will be greatly reduced.

If the paint surface is dull or has scratches and paint peeling, consider using an abrasive or polishing paste before waxing. Both abrasives and polishing pastes are extremely fine abrasive materials.

Waxing should be done at a temperature between 15 and 30 °C, preferably in the shade. When the weather is very hot, the wax will dry as soon as it is applied to the paint, which will not only make it more difficult to polish.

Waxing in the garage, preferably out of direct sunlight. Mainly due to the temperature mentioned above, it is best to wax indoors so that sunlight does not interfere with the waxing process.

If you want to wax your car, you need to clean and dry the entire body before waxing. In addition, it is not recommended to wax in the sun, which can quickly soften and volatilize, so that the active ingredients in the wax can be quickly cured, which is not conducive to full penetration. In fact, when waxing, it should be gradually divided according to the area of the body, and the glass and black unpainted plastic parts and tire rubber should not be waxed.

01 In addition, when waxing, use a soft cotton cloth ball dipped in a little car wax, dot a whole row in the form of an ellipsis, and then use the strength of the wrist to draw a small circle in the form of a continuous progression. It is recommended that when waxing, the strength should be even, and the action should be smooth, you need to wipe a row by row, and do not wax indiscriminately. If you come across stubborn marks, such as scratches on the body, paint marks, etc., you need to rub hard.

02 After the car is waxed, open the door and replenish the door frame. In addition, there is no need to wax the inside of the cabin cover and tail box cover.

03 However, the chassis part of the car is waxed at the end, and it is generally necessary to wait for about half an hour after waxing, and then wipe it gradually with a soft towel dipped in wax. When wiping, it is recommended to close the doors and windows of the car to prevent dust, mosquitoes, etc. from falling into the car.