In summer, the solid wood floor is exposed to the sun, how to maintain the floor so that the floor i

Curtains can be installed in the room and the interior can be kept humid to prevent the floor from deforming.

It is better to install a curtain, do not let the sun dry the floor for a long time, pay attention to ventilation, but also keep it dry, and do a good job of cleaning.

At home, it is necessary to avoid open flames, avoid blisters, avoid being exposed to the sun, clean more, do more maintenance, and the temperature in the home should not be too hot, otherwise it is easy to deform the floor.

When the wood is made into the floor, it still retains its mobility. Long-term exposure can reduce the moisture content of the wood, leading to shrinkage, warping, and deformation. Especially for solid wood flooring, the more raw materials there are, the more susceptible they are to damage.

Laminate flooring should be better maintained at this time. If you find that the floor is damaged by sunlight, it should be humidified in time. If the damage is severe and the area is large, only the floor can be replaced.

In addition, sun exposure can also cause the wood floor to fade, affecting the overall appearance.

Maintain hardwood floors regularly. Exposure to sunlight reduces the moisture content inside the wood, leading to cracks and deformation. The paint on the outer layer of the floor can also be damaged by UV rays.

In summer, try to cover the floor with curtains where the sun is exposed. Waterproof, all kinds of water stains on the floor must be cleaned in time. When solid wood floors are soaked in water, do not dry them immediately in the sun or other heating methods, as this will cause cracking and deformation.

Wipe off water stains. If there are too many water stains to remove in time, open the doors and windows to ventilate and let the floor dry naturally in the shade. When mopping, try not to let the mop get too wet, or vacuum it clean.

Protect against heat sources. Even if it's underfloor heating, don't put heating items like pressure cookers on it. Overheating can lead to irreversible changes in the wood fibers in the floor, which cannot be remedied by other means.

The only bad thing about a plank is that it can easily break without proper use. Many times, it is caused by the material of the floor itself, or it may be due to improper use. You can mix putty and pigment well and then embed them in the cracks, which will last for many years.

Cut the old newspaper into small pieces, add alum and water, cook until thick, and then use a knife to stuff the paper paste into the cracks. When it dries, it will be very strong. It is burned to ashes with a cotton cloth or broken sack, then mixed with raw tung oil to form a paste that is embedded in the cracks in the floor.

If you are exposed to the sun regularly, you may crack, make the floor bulge, and fade.

The wooden floor at home is often sunburned, which will have a certain impact, which will affect the quality of the wood floor, and it will also produce deformation, which looks particularly unsightly.

The wood floor will crack, there will be bulging, the skin will fade, the luster will be lower, and it may also reduce the service life of the board, so when we encounter this situation, we need to immediately take maintenance measures for the wood floor, and it is best to apply wood wax.

It is very likely to cause a bulge. If it is bulging, there is a high chance that it will malfunction, and it will also be **. It affects the safety of human life. will break,

If the harsh summer sun shines on the floor, it is very easy to cause the deformation of the solid wood floor, and the long-term exposure will even make the floor bulge and crack; Long-term exposure to ultraviolet light can also cause the surface of the floor to fade. Solid wood flooring is expensive, and if the deformation causes property damage, it is not to mention that it is very unsightly, and it is very inconvenient to walk on this kind of floor.

Summer happens to be the time when flooring must be taken care of and paid attention to. In order to make the floor at home long-lived, beautiful and generous, the maintenance of the floor in summer should not be careless. Maintenance of the floor not only in general also needs to be "taught by people", follow Yunlan decoration to see the routine maintenance of solid wood flooring!

Direct exposure can lead to a decrease in the moisture content of the internal structure of the wood, resulting in cracks and distortions, and the paint on the surface of the floor will be damaged by ultraviolet light.

All kinds of water stains on the floor must be wiped clean on time. When making tea on the solid wood floor, do not immediately bask in the sun or bake it in other heating methods, which will cause cracking and deformation. Wipe the water stains, if there are too many water stains to get rid of immediately, you can open the windows and doors to ventilate naturally, and let the floor dry of course.

It is best not to get the mop too wet or vacuum the floor when mopping the floor every day.

Even if it is a floor heating floor, do not store items such as pressure cookers that have been heated on it, as excessive heating will inevitably cause the lignin fiber to change the internal structure of the floor, which cannot be saved in many ways.

Oil stains can be wiped with a towel dipped in warm boiled water and detergent; In the case of medicines, drinks or colorants, they must be dealt with immediately, as the dirt dries very quickly in summer, so it should be blotted off with a dry towel and then wiped with a soft cloth soaked in furniture wax. Cigarette butt ablation marks can be vigorously wiped with a soft cloth soaked in furniture wax; Ink stains should be wiped immediately with a soft cloth soaked in wax, if it fails, you can change the wire brush dipped in furniture wax to wipe; Bubble gum and paint stains can be wiped with a towel dipped in gasoline.

1.Sun protection Exposure to the sun will reduce the moisture content of the wood, so cracks and twists will occur, and the paint on the outer layer of the floor will also be damaged by ultraviolet rays.

2.Waterproof All kinds of water stains on the floor must be wiped clean in time. When the solid wood floor is soaked in water, do not immediately bask in the sun or dry it in other heating methods, which will cause cracking and deformation.

Wipe the water stains, if there are too many water stains that cannot be removed in time, you can open the doors and windows to ventilate and let the floor dry naturally.

First, keep the floor dry by wiping it off in time after cleaning. Second, in thunderstorms, moisture-proof, moisture-proof and mildew-proof, thirdly, under the scorching sun, you can properly turn on the air conditioner to cool down, close the curtains and pay attention to care.

In the process of decoration in summer, the solid wood floor should not be exposed to the sun, because it is likely to deform the solid wood floor. These floors are very difficult to maintain.

The wooden floor can be cracked by the sun, the temperature rises in summer, and if the spicy and hot sunlight shines directly on the floor, the wooden floor will be deformed, and the long-term exposure to the sun will even make the floor bulge and crack; Long-term direct exposure to ultraviolet rays will also fade the color of the surface of the floor.

Solid wood flooring is expensive, deformation not only causes economic losses but also seriously affects the overall aesthetics of the family, summer is the season when the floor needs to be maintained and paid attention to.

It is okay to dry it properly, not for too long, if the wooden floor is damp, it is easy to deform, so it is necessary to ensure ventilation, and the time control is more effective within 30 minutes. I hope to adopt, thank you.

Can be non-cracking.

Of course you can't.

It will be deformed in the future

Of course, it will be deformed after a long period of exposure!

Of course, it can't be sunned, and it will be deformed in the future

Of course, it will be deformed after a long period of exposure!

Solid wood floors should be maintained by increasing indoor humidity, waxing on time, essential oil maintenance, and proper dusting.

After decoration, we should pay attention to the maintenance of the solid wood floor, if the maintenance is not improper, it will make the solid wood floor cracked, arched and deformed, etc., a variety of bad situations, and will make his surface gloss worse, which will affect his overall decoration effect. When dusting the solid wood floor, it is best to use a clean pure rag to wipe the surface of the solid wood floor, do not let the solid wood floor get wet, and avoid it from absorbing water and expanding. In addition, you should not scratch the surface of the food floor with sharp objects, and wear soft slippers when you are indoors to prevent unnecessary wear and tear on the floor surface when walking on the solid wood floor.

1. Increase air humidity

Increasing air humidity is a common way to maintain solid wood flooring, because the indoor temperature is relatively dry, especially in some places will be heated, which will make the air drier, but the too dry environment will make the solid wood floor shrink, easy to make the gap between the solid wood floor, affecting its decorative effect, at this time be sure to use a humidifier indoors, the humidity of the indoor environment is controlled at about 50% 60%, so that the solid wood floor can remain stable.

2. Waxing on time

After the solid wood floor is paved, it needs to be waxed on its surface, which will form a protective layer on its surface, make up for the gaps between the solid wood floor, and make it have a better gloss on the surface and look more beautiful. Under normal circumstances, the solid wood floor should be waxed and maintained once a month, pay attention to the method and the choice of wax when waxing, do not use inferior wax, and the waxing should be even, not too thick and not too thin.

3. Essential oil maintenance

Essential oils can also be used when maintaining hardwood floors, because essential oils are volatile substances extracted from the flowers, leaves, bark and seeds of plants, which have a natural aromatic odor and have good moisturizing properties. There are essential oils on the market for solid wood flooring, buy such essential oils directly on the surface of solid wood flooring, which can moisten the solid wood floor, improve its toughness, prevent the solid wood floor, crack due to the dry environment, and repair the fine scratches and cracks on the surface of the solid wood floor, so that its decorative effect can be effectively maintained.

After the wooden floor is decorated, it will appear that the whole house is more classy, but the disadvantage of the wooden floor is that it is easy to deform.

After the winter decoration, it should be heated in time, and usually do not use water to mop, it will not be easy to deform.

To ensure the humidity of the air, it is necessary to sweep the dust regularly, wax regularly, and sometimes use a humidifier.

First, choose a good paving time.

The selection of the season of the basketball court wood floor is very important, because the floor itself is made of natural wood, and the requirements for ambient temperature and humidity are relatively high, and the improper installation time can easily lead to various problems in the future use of the basketball court wood floor.

Second, do a good job of preparing before paving.

1.Ground treatment before paving.

The foundation floor of the venue needs to be cleaned before paving. First of all, clean the cement on the ground, scrape the putty, and try to keep the floor flat; Then clean the floor to remove oil stains or dust and sand from the surface of the floor to ensure that the floor is clean. It is best to brush a layer of dilute cement slurry before paving, remove the stains on the floor, and then pave after the cement is dry, and the moisture content of the general ground base shall not exceed 15.

2.Moisture-proof treatment of the material.

Material preservation is important. Basketball court wooden floor should be stored at room temperature for two days before paving, do not save money, the wet basketball court wooden floor is dried and then used, such a floor is not only easy to mold, the service life will be greatly shortened, on the reverse side of the floor is coated with a layer of moisture-proof protective paint, to prevent the paved ground from affecting the floor, resulting in the situation of floor hollowing.

Third, the paving method is exquisite.

When installing the wooden floor of the basketball court, it is necessary to reserve shrinkage joints, except for the floor expansion joints of about 1cm between the floor and the wall. The gap between the floors should also be reserved for gaps, generally not more than 1mm, and when the floor with higher density is laid, each piece should be left with a gap to prevent future arch deformation.

Fourth, it is necessary to protect after paving.

It is not to do a good job of moisture-proof work after the floor is paved, pay attention to protection after paving, within 48 hours after the wooden floor of the basketball court is paved (generally this period of time becomes the health period of the floor), it is necessary to avoid walking around often on the floor and placing heavy objects, so as to leave enough time for the floor adhesive to be firmly pasted and let the floor dry naturally. In this way, the floor will be natural and durable.

a. Ground moisture-proof treatment method: generally use "three oil and two felt" (three layers of asphalt and two layers of linoleum paper, and then smear a layer of cement on it to prevent the release of harmful gases); The simple treatment method is to apply a moisture-proof film.

B. Balance the expansion of the plate through installation: some add a layer of wool floor to the keel, some require wide gaps between the plates, some require the four corners of the room to leave traps to facilitate moisture, and some require springs in the expansion joints of the wall floor, some use aluminum alloy keel, and some adopt the installation method of rail-type wooden floor.

c. Plate moisture-proof treatment method: backplate tongue and groove painting, wax coating, aluminum-platinum coating, plastic coating using nanotechnology, etc.

Solid wood flooring can be cured so that the floor does not deform: exposure to the sun also reduces the internal moisture content of the wood, cracks and distortions occur, and the paint of the surface tiles is destroyed by ultraviolet rays. It is best to cover the exposed areas of the tiles with a curtain cloth.

All kinds of water traces on the ground must be cleaned in time. After the solid wood floor is soaked in water, do not directly expose it to the sun or dry it with other heating methods, which will cause cracking and deformation. Scrub the water trails.

If there are too many water traces to be eliminated in time, you can open the windows and doors to ventilate naturally, so that the wooden floor can dry naturally in a cool place. When mopping the floor every day, be sure not to over-wet the mop or vacuum it up.

Protect your wooden floors from the sun: Intense sunlight is undoubtedly a major culprit in the damage to wooden floors. Wooden floors will crack and shrink, aging prematurely, and paint will peel off after constant sun exposure.

Therefore, it is necessary to maintain the wooden floor at all times on dog days, and close the curtains to prevent direct sunlight from causing damage to the wooden floor. In heavy rain, you need to pay attention to maintenance: once the wooden floor seeps water, the light ones will be deformed and surged, and the mildew will rot severely.

Therefore, in the case of maintenance, it is necessary to pay attention not to let a lot of water come into contact with the wooden floor. On dog days, it is very easy to have several heavy rains. Once the windows and doors are not closed tightly, precipitation will fall on the wooden floor, causing the wooden floor to be destroyed, of course, if you go out, please close the doors and windows as soon as possible and check them.

Increasing air humidity is a regular way to maintain pure solid wood flooring, because the temperature in the room is relatively dry, especially in some places will be heated, at this time the gas will be more dry, but the excessively dry living environment will make the pure solid wood floor converge, it is easy to make the gap between the pure solid wood floor, endangering its decorative modeling, at this time we must apply an air humidifier in the room to control the humidity of the indoor air at 50% 60%, so that the pure solid wood floor can be maintained for a long time.

After the laying of the pure solid wood floor, it must be solved by finding wax, which will form a protective layer on its surface and fill the gap in the middle of the pure solid wood floor, which will make its surface a little smoother and look better. Under normal circumstances, pure solid wood flooring should be polished and waxed once a month for maintenance, polishing and waxing should pay attention to the method and selection of wax, try not to use fake and inferior wax, and polishing and waxing should be symmetrical, not too thick and not too thin.