How to dehumidify the wooden floor, how to dehumidify the wooden floor

Dehumidification method of sports wood floor:

1. Factory anti-corrosion.

Before leaving the factory, sports wood flooring should be dried and anti-corrosion. And the moisture content of sports wood flooring should reach the balanced moisture content required by the stadium. Generally in the range of 6%-14%.

2. Install dehumidification.

Before the installation of sports wood flooring, it is necessary to pave the ground of the stadium, level and dehumidify the work, and create conditions for the sports wood floor to prevent moisture.

3. Install moisture-proof measures.

In the process of installation, there should be moisture-proof film, ventilation holes, reserved expansion joints and other moisture-proof and dehumidification measures.

4. Maintenance and dehumidification.

The maintenance of sports wood flooring is an important measure to prolong the life of sports wood flooring. Among them, it is strictly prevented from drenching, encroaching and soaking in sports wooden floors. The sports wood floor should be waterproof during the cleaning process, and the indoor stadium should also be ventilated to maintain constant humidity and temperature.

First, choose a good paving time.

The selection of the season of the basketball court wood floor is very important, because the floor itself is made of natural wood, and the requirements for ambient temperature and humidity are relatively high, and the improper installation time can easily lead to various problems in the future use of the basketball court wood floor.

Second, do a good job of preparing before paving.

1.Ground treatment before paving.

The foundation floor of the venue needs to be cleaned before paving. First of all, clean the cement on the ground, scrape the putty, and try to keep the floor flat; Then clean the floor to remove oil stains or dust and sand from the surface of the floor to ensure that the floor is clean. It is best to brush a layer of dilute cement slurry before paving, remove the stains on the floor, and then pave after the cement is dry, and the moisture content of the general ground base shall not exceed 15.

2.Moisture-proof treatment of the material.

Material preservation is important. Basketball court wooden floor should be stored at room temperature for two days before paving, do not save money, the wet basketball court wooden floor is dried and then used, such a floor is not only easy to mold, the service life will be greatly shortened, on the reverse side of the floor is coated with a layer of moisture-proof protective paint, to prevent the paved ground from affecting the floor, resulting in the situation of floor hollowing.

Third, the paving method is exquisite.

When installing the wooden floor of the basketball court, it is necessary to reserve shrinkage joints, except for the floor expansion joints of about 1cm between the floor and the wall. The gap between the floors should also be reserved for gaps, generally not more than 1mm, and when the floor with higher density is laid, each piece should be left with a gap to prevent future arch deformation.

Fourth, it is necessary to protect after paving.

It is not to do a good job of moisture-proof work after the floor is paved, pay attention to protection after paving, within 48 hours after the wooden floor of the basketball court is paved (generally this period of time becomes the health period of the floor), it is necessary to avoid walking around often on the floor and placing heavy objects, so as to leave enough time for the floor adhesive to be firmly pasted and let the floor dry naturally. In this way, the floor will be natural and durable.

Most of the time the weather in the south is relatively humid, if the home is installed with wooden flooring, over time, it is likely to swell, deform, arch phenomenon. Therefore, in daily life, we should pay attention to the maintenance of wood flooring, and we need to achieve reasonable dehumidification. So, how exactly do you dehumidify wooden floors?

Let's talk about how to dehumidify wooden floors, interested friends may wish to take a look together!

1. How to dehumidify wooden floors - pepper dehumidification method.

Placing dried chili peppers indoors can absorb a certain amount of water, but remember to replace them with new dried chili peppers frequently. There is a similar method, which is to place a reliable quality cannonball, because the cannonball contains sulfur, which can not only dehumidify but also remove insects. It should be noted that there are safety issues with artillery fires, so it is necessary to be more careful when using them.

Second, how to dehumidify the wooden floor - salt mopping method.

Salt is a very useful dehumidifier, although it does not have the function of industrial salt that can melt snow and remove ice, but it is more than enough to deal with the dampness at home. Specifically, the dust collapse uses hot water and salt to mop the floor, which can speed up the volatilization of water.

3. How to dehumidify wooden floors - lime moisture absorption method.

Studies have shown that 1 kilogram of quicklime can absorb about kilograms of water in the air. Therefore, put the lime in a wooden box and cover it when the weather is not wet; When the weather is wet, open the lid and remember not to leave the window too wide.

Abstract: Spend tens of thousands of dollars to lay the floor, deformation after moisture makes people feel distressed, wood floor maintenance is skillful, good maintenance of ten years after the wood floor is still smooth and bright, on the contrary, within a few years will lose its luster, wood floor dehumidification and moisture-proof method wood floor dehumidification method tells you what are the methods of wood floor dehumidification wood floor dehumidification is necessary to close the doors and windows immediately:

There is a lot of humid air in the air during the rainy season will directly affect the floor, the key to moisture prevention is in the morning and evening, these two periods of time the air is the most humid, if you do not close the doors and windows immediately, the moisture will erode every corner of the home, when the weather is good, open the doors and windows for ventilation.

It is very important to turn on the air conditioner for dehumidification of wooden floors:

Modern air conditioners generally sell leaky rulers with dehumidification function, which can greatly reduce the moisture in the indoor space, which is a more convenient way to search for Hu than most people.

The desiccant for dehumidification of wood floors is useful:

Like the desiccant in many puffed foods or special dehumidification boxes can be used to dehumidify and prevent moisture in the indoor environment, suitable for placing under the sofa in the living room, in the corner room, and under the bed in the bedroom. In addition, you can place some dehumidification bags in cabinets, wardrobes, etc., to reduce indoor moisture.

Wood floor dehumidification salt bar mopping medium and high method:

Kitchen, bathroom kitchen. Salt is also a good dehumidifier, although it is not as powerful as industrial salt snow melting and de-icing, table salt is more than enough to deal with the dampness at home. Mop the floor with hot water and salt, this method accelerates water evaporation.

Scented candle for dehumidification of wooden floors:

Candles can also play a role in reducing the humidity of indoor air. In the bedroom or living room with flooring, light the aroma to save energy and effectively dry the air, and get out the musty smell in the room. Aromatherapy can also be used as a decoration to enhance the romantic mood of the home, which is both practical and emotional.

It is the most atmospheric dehumidifier.

It is very common for wooden floors to get wet, especially during the rainy season or in humid winter environments. But no matter what causes the wood floor to get wet, we should take timely measures to prevent the wood floor from being damaged. Here are some things you should do if your wooden floor gets wet:

1.Clean and clean: First of all, you need to clean the wooden floor thoroughly. If the wooden floor is wet, you need to wipe the water clean first, and then let the wooden floor answer board dry naturally for a while.

2.Use an absorbent tool: If you have a lot of water, you can also use an absorber or use a paper towel to blot the water dry. Note that sucking the water away does not mean that the wooden floor has dried.

3.Ventilation: Let the air flow smoothly, open the window or use an air purifier to increase the air flow, which can help the wood floor to dry quickly.

4.Use a dehumidifier: If you have a dehumidifier at home, you can use a dehumidifier to reduce the moisture in the indoor air, which can speed up the drying of your wood floor.

5.Use protective materials: Protective materials often contain water-repellent compounds that can help wood floors increase water resistance and moisture resistance.

6.Prevention and maintenance: Regular care and maintenance of wood flooring is the best way to prevent wood flooring from getting wet and damaged. For example, regularly use wood floor maintenance products with good moisture resistance, spray antibacterial and antifouling agents, and so on.

In short, when the wooden floor is wet, timely measures need to be taken to avoid pressure damage to the wooden floor. Preventive measures and timely maintenance are more effective ways to prevent wood flooring from getting wet and damaged.

How to deal with the dampness of the wooden floor: If you want to avoid the dampness of the floor, you should try to avoid hitting the mountain and touching a large area of water, dry it in time with a rag, and vacuum it dry. First of all, the first magic weapon dehumidifier.

Dehumidifier is the natural enemy of humid weather, its appearance has brought the dawn of hope to our home, and we have a sunny world, but unfortunately it is relatively high, and there must be a place to place it to talk. However, turning on the dehumidifying function of the air conditioner makes the moisture-proof effect good. If you are a small household, let's use the second magic weapon activated carbon pack, which has a strong water absorption effect and can also remove miscellaneous odors.

If the wooden floor is moldy, it can be diluted in a ratio of 1:3 with mild bleach, and then wiped clean with a rag, and the wooden floor will return to its original state, giving a refreshing feeling!

1. Spread newspapers: It is a good practice to spread newspapers on the ground and on the table to absorb moisture. Spread the used old newspaper on the floor and table, especially in places that are easy to get wet such as the doorway, and spread two more layers, so that it has a good moisture-proof effect on the interior.

2. Put dehumidifier: go to the supermarket to buy some dehumidifier and put it in all corners of the home and places with heavy humidity, which can effectively adsorb water vapor, remember to replace it in time.

3. Light candles: Lighting candles can prevent water vapor from condensing, so that the indoor humidity can be reduced. If you already have a musty smell in your home, you may want to choose a candle that contains natural plant essential oils, which will not only dry out the air, but also remove musty odors from the room.

4. Mop the floor with hot water and salt: This method can be sensitive to the closure to accelerate the volatilization of water, and after mopping the floor, spread some waste cartons or newspapers at the door of the house, so that the sole of the shoe will reduce the moisture.

5. Equipment: The dehumidification products on the market mainly include dehumidifiers, air conditioners, and heaters. Bridge cracks.