How to use the computer film artifact, how to use this film artifact?

Notebook film is mainly divided into three categories: screen protector film, keyboard film, and shell film. Notebook shell film was first raised in foreign countries, called laptop skins, notebook shell film is mainly used in notebook A cover shell and palm rest, such as IDSKIN notebook shell can also protect the side, notebook shell film is generally patterned, playing the role of beauty and protection from scratches.

Chinese name. Laptop shell film.

Foreign name. laptop skins

Main classifications: Screen protectors, keyboard films, shell films.

Main applications: Laptop a cover and palm rest.

Fast. Navigation.

Function. Performance.

Removable decorative products with protective functions on the surface. It is outstanding in performance and the pattern is artistic.

Laptop shell film.

Laptop shell film.

It's gorgeous and can make your digital device stand out.

Don't want to put on a heavy case and want your laptop to show off your personal style? Then you can't miss the art pattern body sticker (**) to make your laptop a mobile and portable work of art.

Function. Easy to paste and easy to remove.

The use of air conduction technology can effectively remove air bubbles generated during pasting. It is easy to position and leaves no trace even after years of use.

Effectively protect and prevent scratches.

It can effectively prevent scratches and ultraviolet radiation in daily use.

Easy to clean and durable.

After years of research, using the best materials and printing techniques in the world. Each product is easy to clean, durable, and will accompany your device.

1. Clean the surface of the laptop screen.

Since the film needs to ensure that the laptop screen is clean and dust-free, we need to clean the surface of the laptop screen before applying the laptop film. You can find a clean cotton cloth, you can get some water on it, and then wring it very dry, and then go to clear the notebook screen, of course, you can also use a cleaning three-piece set for cleaning the notebook, and it will only cost a few dollars to buy.

Laptop film.

Reminder: Cleaning the screen is to prevent dust or debris on the screen, resulting in film drums or bubbles when sticking the film, so it generally needs to be cleaned, if it is a new unboxed notebook, this step is not required.

Second, the laptop film method.

1. First of all. Once your laptop screen is cleaned, it's time to start applying the film. The notebook film is very simple, we first put the sticker marked with the number 1 down, and then tear off 1 layer, and paste the inner side on the screen, you can uncover a little first, and then aim at the top corner of the notebook, start pasting, and tear off the layer marked with the number 1 while pasting.

Laptop film method.

2. Next.

Next, we slowly tear off the layer marked 1, carefully paste the inner layer of film 1 along the side of the notebook screen, keep the film parallel to the edge of the screen while tearing, and slowly put it down. Because the film has the ability of electrostatic adsorption, it will be automatically adsorbed to the screen, we just need to pay attention not to let the screen produce large bubbles, and save the film and align with the screen, from top to bottom operation.

Laptop.

After we tear off the 1 surface layer on the sticker door, the film will be pasted on the notebook, and we can tear off the 2 surface layers pasted on the laptop screen. In general, it is the same as the mobile phone film, and the main thing to pay attention to is to align with the four types of screen, and leave obvious bubbles in addition. For small bubbles, it generally doesn't matter, because after the laptop is turned on and used, the screen will heat up and squeeze out some of the bubbles.

Fix the mobile phone film artifact on the mobile phone in the specified direction.

Hold the tempered film against the edge of the side of the film artifact, and then slowly put it down.

The tempered film will automatically adsorb on the surface of the phone. Tap your finger on your phone so that the film fits perfectly to your phone.

Take out the artifact and the film is finished.

To sum up, the steps of mobile phone film are mainly the following:

1. Clean up the screen.

2. Correct the position of the film.

3. Correction, air bubbles, and ash cleaning.

In fact, like doing other things, film is also a skilled job, practice makes perfect, and it is normal to paste a few films at the beginning. After grasping a few key points, all that remains is care and patience, and the details mentioned above also need to be paid more attention to in the operation. For novices, the last step is basically to hover between catching bubbles and cleaning the ash, repeating the operation several times.

Here's how to use the film artifact:1. First of all, you need to wipe the mobile phone screen with a paper towel to ensure that there is no obvious dust;

2. Hold the film artifact and stick it smoothly on the phone;

3. Lift the tempered film from the bottom end and slowly press it downward;

4. After completion, you can remove the film artifact.

Film: A thin layer of glass film is attached to the surface of the mobile phone. The film is commonly known as explosion-proof film, heat insulation film or solar film. Its main purpose is to deal with friction, and it also has explosion-proof function.

Explosion-proof film will also have different effects under different processes, so the film process and the quality of the process also have a great impact on the effect of the film.

Film environment, special equipment, operation process and process technology can determine the quality of a film effect, in addition, there are car films, screen protectors, also belong to the film category.

The operation steps for the use of the film artifact are as follows:

Tools Raw materials: mobile phones, tempered film, film artifact.

1. Prepare mobile phones, tempered film, and film artifacts in advance.

2. Use alcohol tablets to wipe the screen clean first, and then wipe the screen again with a wiping cloth.

3, then use the ash removal sticker to completely paste the screen dust, wipe it clean, and fix the film artifact to the phone.

4. After the mobile phone is fixed, slowly paste the tempered film to the top of the mobile phone, and then remove the film artifact on the mobile phone.

5. Wait for the tempered film to slowly stick to the phone, use your fingers to drive out the bubbles inside, and then wipe it with a cloth to finish.

1. When applying the film to the mobile phone, before using this positioning artifact, the mobile phone screen film should be placed accurately on the mobile phone screen without tearing the anti-adhesive film.

2. Then remove a positioning artifact from the mobile phone from the free anti-sticking paper, and only reveal one first, so as not to peel off two sticky sheets at the same time.

3. Make sure that the position of the mobile phone film is placed appropriately, then gently glue the positioning artifact to one side of the membrane, and then glue the other end to the side of the mobile phone, as shown in the following figure. In the process of sticking, Brother Zhixun, don't move the position of the membrane.

4. Then, glue another positioning artifact like this. (You can also stick two positioning artifact stickers on one side of the phone first, and then stick the side of the film after the position of the film is placed, depending on each person's habits.) ）

5. After the two positioning artifacts are glued, the membrane can be gently opened now, so that it is easy to tear off the anti-mucous membrane on the membrane.

6. Then, in the case of positioning the fixed position of the artifact, slowly cover the mobile phone film on the mobile phone screen, and after it is automatically and completely glued, tear off the positioning sticker, so that you can.

1. Open the outer packaging of the screen film (paper shell), take out the film, compare the screen, see if the size is suitable, if you find that it is not suitable, you can replace it with the merchant in time.

2. Wet the rag with detergent, pay attention to the rag must be selected from the Wu Bureau shed and not the plush, and it is generally given when you buy the film. Gently wipe the computer screen with a damp rag, preferably from top to bottom or from left to right in one direction, which is conducive to wiping the dirt on the screen.

3. After the screen is wiped clean, check whether there are any foreign bodies, because if there is a residual foreign body, it will blister when the film is applied. After confirming that there is no foreign matter, open the screen film, generally the screen film is three layers, the outer layer is the protective layer, and the inner is the film.

A good film is labeled on the left and right sides of the film. We tear label 1 a little apart, and then tear the film along one side and one side, pay attention to put it on the computer screen as soon as possible after tearing, otherwise it is easy to get dust and cause bubbles.

4. Stick the torn film to the screen on the screen, and tear the wax fiber sheath inside to open, good computer screen films are adsorbed by electrostatic adsorption, so when pasting, put the film on the screen and it will be automatically pasted.

5. After the film is completely attached to it, you can use a tool to gently press the film, and you can use a bank card or something like that to prevent the film from foaming without adsorption with the screen, and complete the above steps.