How to use soft film powder, why is it not recommended to use soft film powder

Everyone's not professional enough, because I myself am the Shanxi general manager of "Kemei" soft film powder, I will also say a few words.

You can use cool boiled water to mix, you can also use the milk and other highly nutritious things upstairs to mix, it is best to mix with water, add some milk or egg white in an appropriate amount, mix evenly, not too thin, it is more appropriate to apply it to the face without flowing down by feeling, apply it evenly on the face with a film adjustment stick, lie down and wait for 20-30 minutes and then gently peel it off, the better soft film powder has high elasticity, you can remove the whole sheet, the edge part is relatively thin, it will be dry, do not conclude that this soft film powder is not good, hehe.

The retail price of soft film powder on the market is generally more than 150 yuan per barrel (500 grams per barrel), which is considered relatively high-quality, and it is best not to try it if it is too low. It may not work, and the money is spent in vain.

Buy a ** bowl first. Then pour an appropriate amount of powder into it.。 Add milk or purified water (don't tap water) and transfer to the lake.

Don't be too thin. And then it was tied to the face. Wait until he's 8 percent dry.

If it's too dry, he'll absorb your ** water.

I use deionized water every time I test the membrane powder in the laboratory, which is pure water debugging in life! The ratio of film powder to water is 1:2 for the best effect!

If you can, you can also use film powder gel! The powders and gels produced by our company are packaged in a 1:2 ratio!

Water is also available, good moisturizing! The length of the film formation time and the degree of consistency are determined by the quality of the film powder itself! We evaluate the worst of a film powder from these aspects:

1. Remove the soft film after drying, and see if the texture on one side of the paste is clear, the clearer the description, the better the quality! 2. Fold the soft film in half, if it breaks soon***! 3. Stretch the soft film, the better the toughness, the better the quality!

4. After removing the soft film, see if there are any water traces on your **, the more water traces, the better the quality! If it feels very dry after taking it off, then this film powder can't be used at all! It's not good for **!

You can use these simple methods to test the quality of the film powder you are using now! I hope you can buy a good film powder and mix it with water in a ratio of 1:2.

I don't know if what the landlord said is Huimeishe's, the soft film powder I bought from Huimeishe, in fact, is the same as **, it is noodles, but you need to adjust it yourself, prepare a container, put a little soft film in it, and then dilute it with water, but don't suck it too much, and then stir it evenly with a ** stick to apply it to your face.

1. The main ingredient of soft film powder is plaster. It can form a very hard film and can be lifted, but it has the disadvantage of being easy to pluck. 2. The skin care products produced by regular manufacturers are not harmful to the best within the shelf life.

If it is not a regular manufacturer, or it has expired, it will not only help the maintenance of the eggplant, but also cause serious injuries to the company. 3. Do not use soft film powder for a long time. so as not to cause damage.

In addition, the soft film powder is not suitable for women under the age of 25, the key depends on how it is, if it is not very good, it may be 22 years old, and it is easy to burn when using soft film powder around 23 years old.

Summary. Hello dear!We are answering for you--- how can the soft film powder be removed in one piece?Wet with water and remove the whole piece.

Homemade**How can I tear it off in one piece?

Hello dear!We are answering for you--- how can the soft film powder be removed in one piece?Wet with water and remove the whole piece.

Do you have to wait until it's dry to take it off?

You can't wait for too dry, and the general soft mask will be taken off after 15 minutes after the face is applied. When it dries, the moisture is sucked up. Instead, it causes enlarged pores.

If it doesn't dry, it's sticky and unmolded.

Put about 25g of soft film powder into the film adjustment bowl, then measure out 25ml of pure water or skin care water in the measuring cup, slowly introduce the water into the bowl, and quickly stir in the clockwise direction with the film adjustment stick to completely integrate the soft and high film powder with water. It should be noted that the stirring process should not be interrupted or reversed, otherwise it will easily lead to the agglomeration of the paste. After the stirring is completed, Ke Shengxiao scoops out a spoonful of the formed paste with a film adjustment rod, the state is fluid but will not drip in a linear form, and Qi Xiao accompanies the soft film powder to be prepared.

Add water and mix and apply directly to the face. If you're feeling tight, try adding more water. If that doesn't work, apply the mask to your face and then soak it in water with a piece of paper to cover it.

How do you tear off the whole piece?

In the case of molding, it is wet.

But I'm sticky.

Is there more water or too little?

It should be too much water. The viscous upper face will be moist for about 15 minutes, and the humidity will just be removed.

The first tools needed are bowls, spoons, brushes; **Stirring bar, soft film powder, toner or hydrosol, etc.; Take an appropriate amount of ** powder with a spoon, it is recommended to use about 30g for each product, and 60-80g for each product if possible; Add water, just like dough, don't pour water all at once, pour it in a small amount slowly; Stir, the speed should be fast, the strength should be large, to avoid the appearance of pimple grains, affecting the best effect; The stirring time should be controlled in minutes to avoid the condensation of the soft film powder in the bowl, which is difficult to apply if it is too dry, and it is easy to flow on the face if it is too thin, and it will affect the effect; After adjusting it, you can apply it evenly to the face with a **brush. The thicker the soft film powder, the better the sealing, the more conducive to absorbing nutrients, in addition, the thick soft film powder is conducive to the removal of the whole sheet. **After applying, wait 15-20 minutes before removing the mask.

The soft film powder is dry on the outside, but it is still wet on the inside. The soft film powder will not completely dry after the film is formed until it is removed, which is why the effect of the soft film powder is better than other **.

Hello, just wet it with water. Take about 25g of soft film powder and put it into the film mixing bowl, then measure out 25ml of pure water or skin care water in the measuring cup, slowly introduce the water into the bowl, and quickly stir it in the clockwise direction with the film adjustment stick to completely fuse the soft film powder with water. It should be noted that the skin can not be interrupted during the stirring process, and it cannot be reversed, otherwise it will easily lead to the clumping of the paste.

The soft mask is applied to the face, and the appearance is dry for half an hour, and the inside is wet, and the whole mask cannot be uncovered.

It didn't work out.

Hello, I recommend the technique of applying a soft mask: first apply a layer of rose water or lotion to the washed face, and then apply the mask. The first tools needed are bowls, spoons, brushes; **Stirring bar, soft film powder, toner or hydrosol, etc.; Take an appropriate amount of ** powder with a spoon, it is recommended to use about 30g for each product, and 60-80g for each product if possible; Add water, just like dough, don't pour water all at once, pour it in a small amount slowly; Stirring, the speed should be fast, the strength should be large, to avoid the appearance of pimple grains, affecting the effect of Nian Xunru; The stirring time should be controlled in minutes to avoid the condensation of the soft film powder in the bowl, which is difficult to apply if it is too dry, and it is easy to flow on the face if it is too thin, and it will affect the effect; After adjusting it, you can apply it evenly to the face with a **brush.

The thicker the soft film powder, the better the sealing, the more conducive to absorbing nutrients, in addition, the thick soft film powder is conducive to the removal of the whole sheet. **After applying the mask, wait 15-20 minutes before removing the mask. The soft film powder is dry on the outside, but it is still wet on the inside.

The soft film powder will not completely dry after the film is formed until it is removed, which is why the effect of the soft film powder is better than other **.

The use of soft film powder is as follows:1. Put 35g of soft film powder (2 tablespoons + 1 teaspoon) in a ** bowl, as shown in the figure below.

2. Fill 25ml (1 tablespoon + 2 teaspoons) of water from the water cup into the ** bowl, and the water can use pure water and rose water, as shown in the figure below.

3. Stir well into a uniform thin paste, as shown in the figure below.

4. Finally, apply the soft film evenly on the face with a ** stick, maintain a certain thickness, and the whole coating process can be completed within 2 minutes, as shown in the figure below.