Apple 11 scrape the screen with the tempered film before pasting the tempered film, will the screen

Generally speaking, it will not be scratched, if you use more force, it may also be scratched, generally speaking, if you scratch the screen, there may be some small scratches on the screen, you check it to see if there are scratches on the phone.

will scratch. Although I'm not very sure whether you are trying the hardness of the tempered film, or if you want to see the scratch resistance of your mobile phone screen, I personally recommend not trying, of course, the decision is up to you.

The hardness of the mobile phone screen is very high, and there will be no traces when you scratch it with a knife, let alone the tempered film, but the sand in the air and the like will scratch the screen.

Apple's glass is Corning glass copy glass, the ultra-hard application scratch method is to scratch the surface of the tested mineral with a pyramidal diamond, and the depth of the measured scratch is divided into ten grades to represent the hardness: talc 1 (low hardness), gypsum 2, calcite 3, fluorite 4, apatite 5, orthoclase 6, quartz, topaz 8, corundum 9, diamond 10. The hardness value is not a hardness value, but a value expressed in the order of hardness.

Glass has a hardness of 55-6 on the Mohs scale, while Corning's Gorilla Glass is a glass within a glass and is said to reach 7 on the Mohs scale! The hardness of tempered glass is generally 65, while the hardness of most metals is 55. If the metal key rubs against the tempered glass, the only thing that will be injured is the metal key with lower hardness.

And the hardness of human nails is not even 3.

Summary. 1. The quality of the mobile phone film pasted. There is no standard for mobile phone films, so it may cause insensitivity to the touch.

Try again after tearing off the film to see if the touch is sensitive, if the sensitivity is okay, it is the problem of the mobile phone, if it is still not sensitive, then it is not the problem of the membrane, it is the problem of the mobile phone. 2. Problems in the lamination process, such as too much dust and debris in the interlayer. If you plan to use it again after the film is torn off, then you should choose a less ventilated place, and do not blow the fan at it, otherwise a lot of dust will stick to it, and then stick it on.

3. The mobile phone film is too thick. I hope mine clears your mind.

I'm sorry I don't understand, but can you elaborate on that?

1. The quality of the mobile phone film pasted. There is no standard for mobile phone films, so it is possible that the traces of rubber are not sensitive to the touch. Try again after tearing off the film to see if the touch is sensitive, if the sensitivity is okay, it is the problem of the mobile phone, if it is still not sensitive, then it is not the problem of the membrane, it is the problem of the mobile phone.

2. Problems in the lamination process, such as too much dust and debris in the interlayer. If you plan to use it again after the film is torn off, then you should choose a less ventilated place, and do not blow the fan at it, otherwise a lot of dust will stick to it, and then stick it on. 3. The mobile phone film is too thick.

I hope mine clears your mind. Eggplant.