-
Hello subject, it's best to start applying the film when you get your hands on a new car! Wrap for privacy! Serve as heat insulation! Play beautiful! Therefore, it is recommended to apply the film after getting the car!
-
Once the cards are played, you're good to go.
-
Glass film is often advertised by merchants to have sunscreen, ultraviolet protection, explosion-proof and other functions, so it has almost become a must-do item for many new car owners. But in fact, the car glass film is unreasonable, and it is advocated not to stick the film, especially the colored film, the fundamental reason is that the film will produce many drawbacks, and it will cause traffic accidents in serious cases.
Most car owners hope to be able to insulate and protect privacy, but too deep the film will not only affect the driver's safe driving, but also may interfere with the sight of the car behind, and the thermal insulation performance is also limited. On the other hand, there are all kinds of membranes in the market, and it is normal to be deceived.
Harms of car wraps:
1.The car film affects the vision of the car interior, which increases the difficulty of law enforcement. To put it more directly, it is not easy to enforce the law when encountering situations such as kidnapping.
2.After the glass film is applied, it will cause reflection on the car body, which will affect the line of sight of the car behind it, and the incidence of rear-end collisions will also increase.
3.Many people have seen the situation of driving after the film, reflecting the reflection of the center console during the day and the street light line dispersing at night. It brings a very large driving hazard to the driver.
-
3 days.
Generally, whether the window can be lifted after the film is applied needs to be determined according to the time and weather, basically within 3 days in summer, and about 7 days in winter, try not to raise or lower the window. The reason is that the car film has not been completely fixed just after pasting, and it is easy to displace in the process of lifting and lowering the window, and even grind the edge position or cause scratching on it.
Precautions for new car films.
When choosing a film, you must be careful, and you must also choose a film produced by a regular manufacturer, so that you can have a guarantee. Many veteran drivers know that applying film to the car is not only to protect the car, but also to prevent dust and scratches, and more importantly, it can also play a role in blocking ultraviolet rays. Although it is only a trivial matter, everyone cannot ignore this problem.
When choosing a car film, you must choose the best one. And it's best to find a knowledgeable friend to help you choose. If you choose a film by yourself, you can also distinguish the quality of the film according to these tips.
When choosing a car film, you must observe the light transmittance of the car film.
-
New car film probablyIt takes 4 hours.
The time it takes to apply the film for a new car depends on the model, and it takes about 3 to 4 hours for a medium-sized car. Larger models take about 4 to hours. MPVs take about 5 hours.
There is no need to wash the car for three days with a new car film; A car with a panoramic sunroof does not need to open the sunroof for three days, especially when driving; If there are air bubbles on the edge of the membrane, it should be repaired at the construction site within 24 hours.
The main function of the film is to block ultraviolet rays, block part of the heat, and prevent damage and glare caused by glass splashing. At the same time, according to the unidirectional perspective performance of the solar film, the purpose of protecting personal privacy is achieved. In addition, it can also reduce the damage of ultraviolet radiation to the items and people in the car, reduce the temperature in the car through the physical reflection mold base stool, reduce the use of car noise, thereby reducing fuel consumption and saving part of the expenses.
Precautions for new car films
15 minutes before the preparation of the film, the film technician should wear anti-static clothing, wash hands and tools, the film must be cleaned inside and outside, and the window should be carefully cleaned. Before applying the film, you should check whether the installation of the window glass is complete and the integrity of the car glass. Clean the inner and outer surfaces of the windows before applying the film.
In the process of lamination, the exterior of the window glass should be accurately formed, and finally the inner surface should be pasted, so the outer surface should first be cleaned with detergents such as all-purpose water and adhesive remover, and the surface stains should be scraped from the middle to both sides with a hard scraper, and the residual dust should be scraped off with a soft scraper.
The requirements of the local traffic management departments are different, and the solar film that generally meets the traffic laws and regulations can be installed and pasted, and does not affect the license.
Yes, it is possible to comply with traffic regulations before the new car is licensed. >>>More
On the 28th, according to the Changchun traffic police, the new cars that have just left the factory are in line with environmental protection regulations, and the traffic police will not punish such vehicles, regardless of whether they are pasted with environmental protection signs. >>>More
I own a car repair shop, and I will tell a little secret, the darker the color of the film, the worse, a good film, the color is very light, it can also block red ultraviolet rays very well.
In order to avoid damage to the heat insulation film, it is best not to lift the window glass within 5-7 days. >>>More