Problems with the computer installation system, problems with the computer installation system

The prompt is to boot from an optical drive, there may be no disc or the disc cannot boot the system boot. If you are reinstalling the system, it is estimated that the system disk cannot be installed on the system

From the description of the problem, it should be that the optical drive reading disk is abnormal, that is, the optical drive does not read the disk or the system disk has a problem.

In the process of installing the driver, the installed driver does not match your hardware, causing an error;

Solution, in the process of installing the system, you will choose a few seconds before and after installing the driver, and you choose not to install all the drivers;

Wait until you have installed the system and then use the driver wizard to install your driver.

If you are sure that your computer has not changed the hardware, the system disk is still the previous system disk, then the blue screen of your computer has nothing to do with the system, then you may not need to install the system, because it is your hardware problem.

Hardware-induced blue screens: memory sticks, graphics cards.

The memory is generally done because of dust, and the toothbrush gets it;

The graphics card is not broken, check the method: unplug the independent graphics card, connect the display screen to the interface of the motherboard, see clearly, it is the interface of the motherboard (integrated onboard graphics card), and the painting that can turn on the boot means that there is a problem with your independent graphics card, if you are sure that there is no upgrade driver, it is a tragedy, change the graphics card.

This problem is a problem with your disk You are using a ghost disk Upstairs is the correct solution But it's a bit sleepy to deal with It is recommended to buy the pure installation version directly.

Generally, the memory causes a lot of blue screens, unplug the memory, use the eraser to remove the gold finger, and then plug it in.

plus: wandrv(86).exe, this is a free sky** driver, you use pe in safe mode, directly use ghost to restore, there will be no such problem, I hope it can help you, thank you.

First of all, it is impossible to install the system remotely, you can go to buy a disk to start the item and change it to cd *** to save and restart and then reinstall, or you can use the next image on the Internet to make an installation program with a USB flash drive.

The next 64-bit xp on the web is the next restore software! Run the restore software to install automatically and restart your computer! That's it.

What you see elsewhere, you might use.

The problem of VPU reset became popular in 2004 as the 9550 fully dominated the low-to-mid-range market, especially on the overclocked 9550. Later, it spread to PCI-E interface models such as X550 and X700, and the cases of X1000 began to gradually decrease. The original intention of ATI is that when the core of the graphics card fails, it simply stops the rendering of the VPU and exits the 3D state without having to restart the computer.

In other words, if this feature is turned off in the driver control panel, the symptoms are freezes and reboots, not just a warning window. The failure of the VPU reset can be caused by the following reasons.

First, the driving problem. The drivers are not only the graphics drivers, but also the motherboard drivers.

Second, the problem of the game itself. If your graphics card is just playing a certain game or a few games and the VPU resets the phenomenon, and most of the games can run normally, it may be that there is a bug in the individual game itself, you can go to some famous game forums to see if many people have encountered the same problem, if it is a bug, upgrading the version of the game can generally be solved. However, the game version resolution does not apply to online games.

3. Insufficient power supply. Since the power consumption of the graphics card to run 3D programs is much greater than that of 2D application, if the power supply capacity of the graphics card interface is insufficient or the power of the power supply is insufficient, the graphics card will not get enough power, resulting in VPU reset. You can try to increase the voltage of the graphics card interface in the BIOS or pay attention to the extra time to be very cautious); If you are not confident in your power supply, you can try a different power supply.

Fourth, the temperature of the graphics card is too high. If the above operation is invalid, you need to consider the temperature problem, open the case, and see if the fan of the graphics card is working properly and whether the heatsink has fallen off the PCB. You can try to remove the heat sink to remove the dust and reapply the heat sink silicone grease.

Overclocking is especially prone to power supply and heat dissipation issues, and if the software can't solve it, you can only drop back to the default frequency.

There is nothing you can do, a lot of English just prompts you that something is wrong, and you don't know what's going on without writing anything.

The hardware driver is too low, your next Master Lu, click on the driver management, and it will automatically find your latest hardware driver, and it will be good after installation. If that doesn't work, you plug the memory module back in.

The ghost disk has wood and has been sure that it's okay.

A total of five steps, buy a system disk; Insert the optical drive; Restart the computer (if you are fast, you can eject the optical drive after booting up, insert the optical disc, and load the optical drive); The system prompts you to press any key; Autocomplete (need to format system disk, set account, password).

This is not the system file that will be reinstalled, you may have chosen the wrong one, click Cancel, Exit, and Reselect the file.

Ghost is in trouble and is going to put it in this file.

Ignore him and click cancel on the right

And start over.