Can jasmine be planted, and how to raise jasmine flower flowers?

1. Can jasmine be propagated by cuttings?

Jasmine can be propagated by cuttings. Cuttings are one of the methods of propagation, and jasmine can take root normally through cuttings, and can also be cultivated into new plants. If jasmine wants to improve the survival rate of cuttings and promote rooting and survival as soon as possible, it can be selected in May and June every summer, when the climate is more suitable and the air humidity is higher, which is conducive to the survival of cuttings.

Second, the cuttings of jasmine.

Cuttings: Cut the branches from the well-growing jasmine plants as cuttings, and cut the new annual stouts, healthy new branches, if the number of branches is small, you can choose long branches without flower buds, and keep the length to about 8-10 cm. Remove the leaves at the lower end of the branch, leaving a few leaves at the top of the branch, you can cut off half of the leaves to avoid excess nutrient consumption.

Cutting substrate: You can choose loose and breathable sandy soil as the cutting substrate, which can be mixed with peat soil, vermiculite and coarse sand, and disinfected and sterilized after preparation to prevent the cuttings from being infected with germs, and the prepared substrate is loaded into the pot.

Cuttings: poke holes in the surface of the substrate and insert cuttings into the substrate to a depth of about 4-5 cm. After the cuttings are done, gently press the surrounding soil, water the soil thoroughly, place the cuttings in a ventilated place for maintenance, and accept astigmatism in an appropriate amount, and it can take root and grow in about half a month to a month.

Prepare a pair of scissors or a knife to cross-scissors.

It should be noted that jasmine with a net sleeve cannot be removed, remember to remove the water storage cotton wrapped in the roots, and cut the flowers after these preparations are done.

Use scissors to tilt the jasmine root at an angle of about 45 degrees, and then cut off the root about 3 cm, after the cut flower is completed, it is followed by the process of awakening the flower, and the specific operation method is to soak the rest of the jasmine except the flower head into water, and you can do it.

Maintenance method: 1. Sufficient light.

Sufficient light is the most suitable environment for its growth, as long as this condition is ensured, the plant can grow better. When the light conditions are met, the color of the leaves will become intensely green, the number of flowers will be large, and the aroma will be stronger. If this condition is not met, the branches of the plant will grow, the color of the leaves will fade, and the number of flowers and aroma will decrease significantly.

2. Proper watering.

The regulation of water volume is the focus of cultivation, it is afraid of waterlogging, so this requires more attention when watering, not blindly watering it, resulting in water accumulation in the potting soil, and the plant will also face death. When it is growing vigorously, it can be watered more appropriately, but from autumn when the temperature becomes colder, it needs to be gradually reduced.

3. Fertilize according to the rules.

Only sufficient nutrient support can meet the growth of the plant, and fertilization is carried out according to its growth law. During the growing season, it is necessary to provide sufficient nutrient support to promote the formation of flower buds. However, the concentration must not be too high, as it is easy to burn the root system.

Control the temperature in the flower pile to make the flowers vibrant, promote the opening and spit out the fragrance violently. The suitable temperature for flowers to open is 32-37, therefore, if the temperature is lower than 30, the flowers must be piled high to promote the temperature and the flowers respirate.

When the pile temperature reaches more than 38, the flower pile should be opened, the thin spread will be cooled, and the oxygen will be increased to promote the opening of the flowers;

When the temperature is high, it should be thinly spread, turned and ventilated to prevent the deterioration of flowers due to high pile temperature, and the height of the pile is generally 15-20cm. In spring and autumn, due to the low temperature, the pile height is generally 30-40cm, and sometimes it is covered with a cloth to maintain the temperature of the pile and promote the opening of flowers.

Tips for raising jasmine.

1. If you want jasmine flowers to be maintained for a longer time, you should change the water regularly to ensure water quality. Every time you change the water, you should prune the flower branches and cut the bottom obliquely. Also add preservatives, vitamin C, etc. to the vase, which can play a role in preserving.

2. Usually pay attention to the position, it is recommended to put it in a cool place, do not let it receive light. Spray water around the place frequently to increase the humidity, so that it will stay fresh for longer.

Jasmine can be cuttings, cuttings can be selected in May and June every year, cuttings can be used to mix garden soil, compost soil, river sand soil in a ratio of 4:4:2 to make a substrate for cultivation.

It is necessary to choose annual robust shoots as cuttings, and the length should be controlled between 8 and 10 cm. After the completion of cuttings, it is necessary to water the root water once, and after rooting, it is necessary to water the diluted fertilizer water every 7 10 days.

Jasmine can be cuttings, jasmine can be cultivated by cuttings to cultivate new plants, cuttings can be selected in May and June every year, during which the climate is more suitable, the humidity in the air is higher, can improve the survival rate of jasmine cuttings, and the specific cutting time needs to be adjusted according to the local climatic conditions.

When cutting jasmine, it is necessary to choose the soil with rich organic matter content and strong drainage and air permeability as the cultivation substrate, and when the soil is matched, the garden soil, compost soil and river sand soil can be mixed into the cultivation substrate in the ratio of 4:4:2, and the dry cake fertilizer that is well rotted can be inserted to improve the fertility of the soil.

Before cuttings of jasmine, it is necessary to cut the branches from the robust mother plant as cuttings, mainly annual thick branches, the length is controlled between 8 10 cm, and remove the excess leaves at the lower end, only keep the upper end of 2 3 leaves, and then the branches can be directly inserted into the soil, the depth is controlled between 4 5 cm, and the surrounding soil needs to be compacted after the cuttings are completed.

After the cuttings are completed, it is necessary to water the soil once with rooting water, and then place it in the shade of outdoor ventilation for maintenance, avoid direct sunlight, and after the cuttings take root, it is necessary to water the diluted fertilizer water every 7 10 days, and phosphorus and potassium fertilizer need to be applied between June and September to promote the differentiation of flower buds.

Jasmine is propagated by cuttings in spring, summer and autumn, but the survival rate of cuttings in spring and autumn is the highest, first pick 8 10cm branches, and then treat the branches to make their wounds heal naturally, prepare loose and breathable sandy soil, insert jasmine branches into the soil suitable for growth, and wait for a month to take root and sprout.

Jasmine uses cuttings to propagate a high survival rate, usually can be propagated by cuttings in spring, summer and autumn, but it is best to carry out in spring and autumn, the survival rate is improved, and summer cuttings not only need to reduce the surrounding temperature, the survival rate is not very high.

First of all, from a vigorous jasmine plant, pick the branches that have grown for about a year without any pests and diseases 8 10cm, keep two leaves on the branches, and cut off half of the leaves, and put them in a cool and ventilated place to promote the natural drying of jasmine branches.

Jasmine does not have high requirements for the environment and soil, generally in the loose and breathable sandy soil, we can directly insert the branches into the sandy soil, or we can use humus soil, peaty soil, and sandy soil in accordance with the ratio of 2:2:1 to mix as a substrate, so that the branches can take root and sprout faster.

For jasmine cuttings is actually very simple, first spray water on the prepared soil, make the soil moist and then insert its branches, properly loosen the soil, put it in a well-ventilated shade, and wait for about a month for the branches to take root and sprout.

Jasmine is a very easy to take cuttings of plants, only need to use the method of soil cuttings, cuttings do not need to be transplanted after the cuttings are lived, in the original pot to raise, then it can quickly grow full of roots and bloom directly.

1. Selection of branches.

To choose a high hardness of green branches, the length of about ten centimeters, the top one or two leaves are retained, the bottom of the leaves are all removed to it, to prune the bottom of the branch on the bevel, and then to find a diameter within ten centimeters of the pot, do not use a deep pot, with good air permeability of the nutrient soil, nutrient soil to be sterile, the branch into the soil two or three centimeters, directly to it watered through, watering the water to add some rooting liquid, add some carbendazim, to prevent rotten roots.

2. After the cuttings of such a pot are done, we can put it in a position where the light can be seen, at least two or three hours, or it can be placed under the tree to see astigmatism, to ensure the ventilation of the environment, the soil surface is dry and he is watered in time, using this method of cuttings, under normal circumstances, one to two weeks can grow roots, the roots grow out of direct contact with the nutrient soil, which contains nutrients, and then it can quickly grow roots, and new shoots will grow, if the new shoots are not topped, It can bloom directly during the cuttings process.

3. If you use the method of soil cuttings to operate, it is recommended to see its new shoots grow, and when it grows relatively fast, we can properly water the fertilizer once or twice, which will help it grow roots, and try to use nitrogen, phosphorus and potassium balanced multi-element fertilizer, so that it will grow quickly.

Cuttings of jasmine are one of the easiest methods of propagation.

Jasmine cuttings are best in March and April or the rainy season, from the 2 4-year-old mother plant, cut one or two year-old strong branches for cuttings, the cuttings are 8 10 cm long, the open field seedbed can be fine yellow sand, the pot seedbed can also be used vermiculite, the depth of insertion into the soil is 1 2 of the length of the cuttings. It is best to cut and insert as you go, and after inserting, use your index finger and middle finger to wrap the cuttings with mud and press them down. The key to the survival of cuttings is watering, and it is known from practice that the soil moisture is 75% 80% before wound healing, 50% to 60% after wound healing, and 40% to 50% after rooting.

After insertion, fill the water, and then use plastic mulch to arch the shed, maintain the air humidity, control the temperature at about 25, about 20 30 days can take root.