If you want to use a refrigerator to save electricity, how should you use it?

Avoid increasing the temperature around the refrigerator. Try to place the refrigerator in a shady part of your home away from direct sunlight. The refrigerator should also not be placed with appliances such as stereos, TVs, microwave ovens, etc., as the heat generated by these appliances can increase the power consumption of the refrigerator.

The refrigerator is a very magical thing, let's look at the "China Energy Efficiency Label" on it, there is a key parameter on it, called "power consumption (kWh 24 hours)", the following number is generally less than 1, at most not more than 2. What does that mean? That is to say, this refrigerator lasts for 24 hours and does not use 1 kilowatt-hour of electricity.

Although some people have experimented that hot food is more likely to freeze when it is placed directly in the refrigerator. But it does require more power to achieve this result, so waiting for food to cool down is also a way to save power. When placing the refrigerator, leave appropriate space on the left and right sides and on the back to facilitate heat dissipation.

It is advisable to store 80% of the food in the refrigerator, too little will reduce the heat capacity, and too full will not be conducive to cold air circulation. Freshly washed fruits and vegetables should be drained and stored to reduce water evaporation to avoid thickening the frost layer.

What we need to pay attention to is to reduce the number of times the refrigerator door is opened and closed. Try to take out or put in the things you need all at once. Refrigerators are meant to be kept fresh and frozen, and they can only function as long as they are in a closed environment.

Each switch loses the cold temperature inside. This reduces the loss of cold air in the refrigerator and saves energy.

To the refrigerator to save electricity The current refrigerator is basically a 600A compressor, the machine is small and efficient, to save electricity, don't put things too full, and open the refrigerator door for a long time, and then go out to buy stocking to freeze the vacuum packaging, hot dishes do not directly put in the refrigerator, hot rice and hot soup should not be put directly into the refrigerator, should be cooled and then put in the refrigerator, otherwise the heat will increase the temperature of the refrigerator, increase the power consumption of the refrigerator, and it, the hot gas will also frost in the refrigerator, causing the blockage of the water outlet, Cause unnecessary trouble.

There are three main tips for using the refrigerator to save electricity, the first is to minimize and shorten the time and frequency of opening the door, because every time the door is opened, the air conditioner will be released and the power consumption of the refrigerator will be increased; The second is to replace the aging sealing ring of the refrigerator in time, which can effectively improve the sealing and heat preservation of the refrigerator and reduce electricity consumption; The third is to place the refrigerator in a cool place, because for every 5 degrees increase in the temperature around the refrigerator, the internal power consumption increases by 25%.

The temperature regulator is properly adjusted, and the temperature inside the refrigerator is the biggest reason for power consumption. Defrost in time, the refrigerator frost is too thick, which will produce a lot of thermal resistance, which will seriously affect the heat exchange, reduce the number of door openings, the refrigerator should not open the door often, the length of the refrigerator door opening time directly affects the power consumption of the refrigerator.

Proper Temperature Regulator: The temperature inside the refrigerator is the biggest cause of power consumption, and the lower the temperature inside the refrigerator, the more power the refrigerator will consume. Therefore, it is necessary to adjust the gear of the thermostat according to the season.

I think when we want to use the refrigerator at home to save more electricity, it is better for us to choose the energy-saving mode as much as possible, and when there are almost no items in the refrigerator, it is better to choose to turn off the refrigerator.

If you want the refrigerator to save electricity, then we can choose the lowest scale in the temperature inside the refrigerator, so that the power of the refrigerator will not be particularly large.

1.Defrost regularly.

If we do not remove these frosts before going regularly, it will directly affect its refrigeration effect, and will also increase its power consumption, which is easy to damage the compressor. Therefore, when we see that the thickness of the frost is more than 7cm, it is time to defrost.

2.Reduce the number of door openings.

Every time we open the refrigerator door, the outside heat will enter the refrigerator, and the cold air in the refrigerator will flow out, if the refrigerator door forgets to close, then the compressor will be loaded and need to run the compressor again. Therefore, when we take food, we should move quickly, and do not open the door at too much angle to reduce the loss of cold air as much as possible. If you don't have any inventory, don't leave your fridge empty, as it will be power-hungry.

A better way is to put a few small basins of water in it and let it freeze, which can help keep the temperature low and reduce energy consumption.

Under normal circumstances, the freezer compartment of the refrigerator should be set up and adjusted at about minus 18 degrees, and the refrigerator room should be about 5 degrees, which is not only conducive to the freezing and preservation of food, but also relatively energy-saving.

If there is no food in the freezer that needs to be frozen for a long time, the temperature can be appropriately increased, such as between minus 12 degrees, which is very energy-saving, especially in summer, and the power saving is obvious.

The same goes for the refrigerator, if there is no special requirement for food preservation, you can adjust the temperature to between 8-12 degrees, which is also more economical. If there is yogurt to keep the rice fresh, it must be set to adjust between 2-6 degrees.

Attached to the common sense of refrigerator use:

1. After the new refrigerator is purchased, it should be wiped several times with a clean rag, but do not close the door after wiping it clean, open the door to let the odor inside dissipate and then use the electricity, or use an electric fan to blow it inside to speed up the emission of the odor.

2. After the new refrigerator is carried back, it should be left to stand for a few hours before powering on the test.

3. The refrigerator should be placed in a cool and ventilated position, and a certain amount of space should be left around it to facilitate the ventilation and heat dissipation of the refrigerator and improve its refrigeration efficiency.

4. When the machine is powered on, the temperature setting of the freezer should be adjusted to minus 18 degrees, and the temperature of the refrigerator should be about 2-6 degrees. The mechanical thermostat should adjust the size of the digital gear according to the ambient temperature of the season, adjust the smaller digital gear in summer, adjust the middle gear in spring and autumn, and adjust it in the larger digital gear in winter.

5. When the machine is powered on, do not put in the food first, wait for the temperature in the refrigerator to drop and stabilize, and then slowly put in the food after the compressor starts and stops normally, and do not put too much food in the car to avoid overload of the compressor.

6. The food placed in the refrigerator should be sealed and wrapped in a container or food bag to avoid odor caused by mutual odor.

Now with the improvement of our living standards, we are actually using refrigerators in our homes, and the use of refrigerators has brought great convenience to our lives, but in the process of using them, corresponding costs may be generated, so some people will have such doubts, that is, how to use refrigerators will be more energy-saving? For this problem, in my personal opinion, for example, try to minimize the time of opening the refrigerator, and at the same time, don't put things that are too hot in the refrigerator.

1 Minimize the time it takes to open the refrigerator

I believe that everyone has such an experience when using the refrigerator at home, that is to say, whenever we want to open the refrigerator Mori Xiao to take something, generally some people's movements are relatively slow, and most of them open the refrigerator for about a minute, which will cause the refrigerator to waste a lot of electricity. Therefore, the refrigerator will also have a prompt, that is, if we open the refrigerator door for more than a certain time limit, then the refrigerator will automatically prompt us. Therefore, if we want to save more electricity in our own refrigerator, then we must limit the number and time of opening the refrigerator.

2 Don't put hot things in the refrigerator

We all know that the temperature inside the refrigerator is quite low, if we suddenly put a hot food in the refrigerator, then it takes a lot of electricity to freeze the food, so generally for things that are too hot, we should put it outside first.

Therefore, in our daily life, we should also pay more attention to this aspect of the problem, for everyone in the grip, understanding this aspect of the problem is of certain benefit to us, of course, when using the refrigerator, we should try not to power off the refrigerator, because the more times the power is off, then it will reduce the life of the refrigerator, these are also a basic common sense in life.

The appropriate temperature should be adjusted, and you can choose from 8 degrees to 10 degrees. The freezing temperature can be selected from 14 degrees to 18 degrees.

In fact, when the refrigerator is in use, it is best to do a good job of slag layering, which should be placed in different areas, and it is also necessary to reduce the number of times the door is opened.

The first thing to do is to adjust the temperature of the refrigerator to the right level, the temperature of the refrigerator should be kept at about 8 degrees to 10 degrees, and then the temperature of the freezer should also be kept at about 18 degrees.

Refrigerators can't just think about saving electricity.

In winter, the indoor temperature is also very low, about the same as the temperature of the refrigerator, so that the thermostat of the refrigerator can not operate, the compressor does not work for a long time, the refrigerator is no problem, but the temperature of -18 of the freezer can not play a freezing role, the food in the freezer will melt, easy to deteriorate. So in winter, the thermostat should be placed at the highest gear 7 and the temperature compensation switch should be turned on to ensure that the freezer compartment can reach -18.

In summer, the room temperature is very high, and the thermostat in the freezer can start the compressor frequently, so the thermostat is generally placed in the 2-3 position.

1.Set the temperature reasonably: Set the refrigerator temperature to the appropriate range, usually 2-5 degrees Celsius. Don't set the temperature too low, as this will increase energy consumption.

2.Avoid opening doors frequently: Every time you open the refrigerator door, the temperature rises due to the incoming hot air, and the refrigerator needs to use more energy to restore the temperature. Try to take out or put in the items you need all at once.

3.Maintain a good seal: Make sure the refrigerator door is well sealed to prevent cold air from escaping. Clean the door's seals regularly to ensure that they are functioning effectively.

4.Don't put hot food in the freezer: Cool hot food to room temperature before putting it in the freezer. Putting hot food in the fridge increases the workload of the flogger and increases energy expenditure.

5.Keep your fridge tidy: Regularly remove ice freezing cream from the inside of your fridge to keep your fridge running efficiently. At the same time, keep the refrigerator clean and remove food debris so that the air circulates well.

6.Avoid placing items above the refrigerator: The top of the refrigerator needs to dissipate heat, and obstructing heat dissipation can lead to increased power consumption in the refrigerator. Make sure there is enough ventilation space around the refrigerator.

7.Adjust the layout of the inside of the refrigerator: Store food in the right place so that the air can circulate well. Do not block vents or make food too dense.

8.Don't place thermal appliances on the refrigerator: Avoid placing thermal appliances on top of the refrigerator, such as microwave ovens, ovens, etc., as they can increase the power consumption of the refrigerator.

With the above methods, you can use your refrigerator more efficiently and reduce your energy consumption.

The refrigerator has its own rated cold storage rate, not that Zaozi said that the more things you put in, the more electricity will be consumed, if it is empty, it is also quite power-consuming, because if the things inside are frozen, it is equivalent to a cold storage, the food itself contains a certain amount of cold, even after a power failure, it can also be kept cold for a certain period of time, but if the refrigerator is very empty, every time you open and close the refrigerator door, the hot air from the outside will enter the remaining space of the refrigerator to produce heat exchange, which will cost more electricity. Things should not be too full or too little.

Some people think that the amount of electricity consumed is the same when I put something in the fridge, and some people think that the less I put in it, the more electricity I save, but this is not the case. If there is too little food in the refrigerator, it is best to use a few plastic boxes to hold water and put it into the freezer to freeze into ice cubes, and then put it in the refrigerator regularly to increase the capacity and not consume electricity. Of course, you can't put things too much, don't exceed 80 of the refrigerator volume, otherwise it will also consume electricity.

In addition, there should be a gap of more than 10 mm between the food, which is conducive to the convection of cold air in the refrigerator, so that the temperature in the box is uniform and stable, and the power consumption is reduced.

1.Reduce the number of times the refrigerator is opened and the duration of the refrigerator.

More than 60% of the heat exchange of the refrigerator is carried out through the door. If the door is opened for 10 seconds, the refrigerator compressor will run for about 10 minutes, and the power consumption will inevitably increase. In addition, the hot air entering the door not only increases the heat load of the refrigerator, the temperature rises, and the compressor runs for a long time, but also thickens the frost layer of the evaporator, so that the refrigeration capacity of the refrigerator decreases.

2.Reasonably determine the operating temperature in the refrigerator.

The temperature of the refrigerator and freezer should be reasonably adjusted according to the type of food stored and the storage time. The lower the temperature in the refrigerator, the more electricity will be consumed. Take the 200L refrigerator as an example, the ambient temperature is about 32, if the temperature of the refrigerator is kept at 5, the monthly power consumption is about 50 degrees, if the temperature of the cold grip is reduced by 3, the monthly power consumption can be saved by about 18%.

Generally, on the premise of ensuring food quality, we try to adjust the knob of the thermostat in a weak cold gear to appropriately increase the temperature of the box to save energy.

3.Set the temperature of the food to ambient temperature before placing it in the refrigerator.

To reduce the heat load in the refrigerator, the stored food should be cooled to the same temperature as the ambient temperature before putting it in the refrigerator.

4.Adjust the amount of food stored in the refrigerator appropriately.

Refrigerators have a certain heat capacity, when the food is too little, the heat capacity of the refrigerator is significantly reduced, so that the first start time of the refrigerator can be reduced, but the downtime will also be significantly shortened, because the food has a certain cold storage capacity, if the box is less food in the oven, the ability to store cold will also decrease, so that the proportion of the refrigerator to start and stop will be higher than when the refrigerator is not loaded. Therefore, the purpose of saving electricity can be achieved by appropriately adjusting the food storage capacity in the refrigerator.

5.Refrigerator placement.

The location of the refrigerator should be to avoid direct sunlight, facilitate ventilation, and keep a distance from the wall so that the heat generated during the operation of the refrigerator can be dissipated.

6.Defrost regularly.

After the refrigerator is used for a period of time, some frost will be produced, if it cannot be frosted regularly, it will affect the cooling effect, and the power consumption will also increase, and even easily damage the compressor. Therefore, whenever you see that the thickness of the frost is more than 7cm, you should defrost it.

7.Check the tightness.

Always check the tightness of the refrigerator seal, if the seal is deformed, it will affect the degree of closure of the seam, causing the air conditioner to leak out, thereby increasing power consumption. If the deformation is serious, it should be repaired and replaced in time.