How to use PS transparent cut out?

Pure cutouts are not good, your transparent area background is too complicated. If you have to use this, you can only use a pen tool to cut it out, and then remove the ones that have been repaired through it as dirty. After removal, reduce the local opacity.

If you want to cut this picture, you have to cut it twice:

1. First cut out the entire transparent shell with a pen tool.

2.Then use the straw tool to suck the black behind the plastic shell, and then paint all the colors behind the plastic case to a black background.

3. Channel cutout, select a channel, press Clert + point layer, and select white.

4.Create a new layer and fill it with white.

<>I'm not a master, so I can't get any good results; I'm not a teacher either, so I won't explain what I'm doing. I only try to learn and practice with my heart, and although my level is despised by a lot of people, I find myself improving every time.

Note: Tools not used: pens, channels, filters.

Main tools and crafting schemes: polygonal nooses, smudge brushes, levels. Layer overlays.

First use a pen to cut out the image you want, then delete the background, remember to remove the layer lock, so that the background is transparent, and then select the gif or tiff format when saving, and then there is an option, check before saving transparency.

Transparent objects are mainly keyed by channels, and they need to be cut out two or more times, once to key the highlights and the other to cut out the dark parts. The rest is the transparent part, the transparent part does not need to be cut, and there will be a transparent one after the combination of highlights and shadows. If the contrast between the channel cutout and the dark is not obvious, you can use the Levels command.

The keying method for this image is:

1. Open the original image in PS.

2. Selection--color range.

3. Click on the whitest part.

4. Adjust the tolerance to 200

5. After confirmation, copy-paste.

Re-absorb the transparent parts directly with the Color Range tool Once the selection is generated, you're good to go.

**There are no pixels in the transparent area, and nothing can be deducted without pixels. Generally, the transparent background** can be directly used as a material without cutout.

As follows:

Tools Raw Materials:

Xiaomi Redmibook

windows 10

ps2017

1. In the first step, press the Ctrl + J shortcut keys to copy the background layer to get layer 1.

2. The second step is to open **, find the "Select" menu in the upper menu, and select the "Color Range" option in the drop-down menu.

3. In the third step, select the first eyedropper tool on the right, adjust the "color tolerance" after picking the color in the red area of **, and click the "OK" button after adjustment.

4. The fourth step is to copy the selection to get a new layer - layer 2.

5. The fifth step is to save the file in PGN format to cut out the transparent seal.

Procedure Method.

1.Put ** footage into PS and unlock the background layer.

2.Use the Pen tool to draw a path along the edge, then press Ctrl+Enter to confirm the selection.

3.Press the shortcut key Ctrl+Shift+I to invert the selection, and press the delete key to delete the background.

4.Follow the steps above to make the background transparent in PS.

1.Open the footage in Photoshop** and click the lock icon on the layer to unlock the layer. 2.

Click "Window" in the upper menu bar and click to check "Properties" to bring up the properties panel. 3.Click the "Remove Background" button in the "Properties" panel to remove the background and key out the image.

4.Press Ctrl+S to save the image, set the save type to "PNG" format, and click "OK".

1. Open PhotoshopCC2019 on your computer, and then open **.

2. After opening, click on the Magic Wand tool.

3. Click on the Magic Wand tool to load the character into the selection area.

4. After loading the character into the selection, click Select in the toolbar and cover it.

5. After entering the selection and masking, set the transparency to 100%, and then adjust the edge detection.

6. Adjust the edge detection in order to adjust the edge of the selection and make the ** cut cleaner, after adjusting the edge detection, press Ctrl+J.

7. After pressing Ctrl+J, the character is cut out, and the background is transparent.

1.Ask: How to use PS cutout to make the middle of this picture transparent.

1. Use a quick selection tool (or a magnetic lasso tool or something) to slowly select the inner edge, as shown below.

2. Then, if you don't ask for much, you can delete directly. To make the edges softer, click on the top to select the drop-down menu, reverse (shortcut key: Ctrl+Shift+I), select Reverse, find the adjustment edges in the selection workspace, and adjust them (after the setting is completed, click to remove noise to generate a mask).

Hope! 2.How to turn a picture into a transparent background in ps.

Turn a picture into a transparent background in PS, the method is: cut out the foreground, the specific method of keying out, depending on the specific situation, as shown in the figure below, the specific method is:

1. Duplicate the layer and fill the background with green.

2. Filter--knockout2--load the working layer.

3. Select the Internal Object tool to load the internal object; Select the External Object tool and load the external object, as shown in the following figure

4、-- Processing--File--Application, as shown below:

5. Through this processing, the foreground is cut out, through the foreground, you can see the green background, when the effect of the cutout is checked, you can delete the background, save the image as a PNG format, so as to retain the transparent background. As shown below:

Technical points: Cutout should adopt flexible cutout techniques according to the specific situation of the image, not rote memorization, and no dogmatic application of a certain tutorial.

3.How to use PS CS4 to cut out parts of an image, and then want to make the cut transparent.

PS Cutout Tutorial 1, open PS CS4 software, wait for all the software to open 2, select "File" - >Open" to select the source file to be cut.

3. In the pop-up window, find the source file you want to cut, click to select it, and click the "Open" button 4. Wait for PS to load the source file to be cutout 5. After PS finishes loading the source file to be cutout, use the shortcut key Ctrl+J to copy a new layer. 6. Use the shortcut "q" to open the quick mask.

7. Click on the channel to see a new alpha channel. 8. Select the brush tool and select black for color.

9. Use a paintbrush to paint the area that needs to be cut. The place where it is applied will be shown red.

10. If you accidentally paint it out, you can erase it with a white brush. 11. After smearing, press the shortcut key [Q] again to close the quick mask.

12. After exiting the quick mask, you will find that the part of the original image that needs to be deducted will become the state of being selected by the selection box. 13. Open the layer channel and click the "eye icon" in front of the "background" layer to eliminate it to hide the "background" layer.

14. Shortcut key Ctrl+X to cut off the background, and you can get the desired rendering. 。

Step 2: Use the key combination Ctrl+J to copy the layer so that the original image will not be damaged during the PS cutout process.

Step 3: Click [Select] - [Color Gamut] in the PS menu bar, select the appropriate value in the pop-up new interface, and then click [OK] to confirm, you can select the official seal, as shown in the figure below:

Step 4: Press the delete key to delete the background, you can completely cut off the official seal, and the background is still transparent. Then we press Ctrl+D to deselect the area, and we can see the following rendering.

PS The official seal cutout operation is almost completed here, but in order to make the cutout effect better, we can also keep improving.

Step 5: At this time, we found that the color of the official seal cut out is relatively light, you can choose a small trick to change this situation, that is, repeatedly press the key combination Ctrl+J to copy this latest layer, and merge them all after getting n layers, so that the outline of the official seal will become clearer.

Step 6: Save**. If you want to make the background of the PS official seal cutout transparent, remember to hide or turn off all but the latest layer, and save ** in PSD format or PNG format. As shown in the figure below:

The eye icon in front of the white background layer is removed, and only the cut-out image is visible, and the white layer is hidden.

If you save it in JPG or BMP format, the transparent areas will be automatically filled with a white background. If you want to save it as transparent, you need to change the saved format to gif or png format.

If you want to save the png format, ctrl+s, select the png format, if you want to save it as gif format, click "file" - "save as web format" - "save". I don't understand hi me

Cutout is to remember to ctrl+j first copy a layer of the far layer, buckle it, and then click off the eye of the layer thumbnail of the basemap to see the transparent complete image.

Since the layer you are keying is "Background", double-click the layer bar on the right to make it "Layer 1", so that the background will become transparent.

1.Double-click the red circle.

2.Changing the layer name to "Layer 1" is fine.