How to accept plasma TV

Acceptance: 1. Check whether it is a prototype. First of all, look at the packaging, to be neat and tidy, the seal on it should be the seal of the original Panasonic factory, there are two seals to determine that this machine has been opened.

2. Check the working time. Turn the volume off to zero,Press the menu button on the remote control,The menu appears on the screen,Enter the settings,Select a random time in the timer shutdown item,Press the call button on the remote control at the same time(See manual,Which is the left of the number key0) and the channel subtraction button on the TV(Note that it's on the TV,Not on the remote control,Under the screen,Press it,The panel will open),Service appears on the screen 1, and then press the mute button on the remote control and the channel reduction button on the TV at the same time ((note that it is on the TV, not on the remote control, under the screen, press it, the panel will open), service 2 appears on the screen, press the number key 3, English hour (hour) appears on the screen, and the following is the working time.

3. Check whether there are burns. All black, all white picture to see if there is a burn watermark.

Installation Notes:

1. The bearing capacity of the installation surface should be guaranteed to be not less than 4 times of the actual load capacity of the TV, and the TV should not be dumped when it is tilted 10 degrees before and after installation.

2. When the installation surface is the wall or roof of the building, it must be solid brick, concrete or an installation surface equivalent to its strength. If the installation surface is a loose installation surface (such as old-style house brick walls, wooden, solid brick walls, etc.) and metal, non-metal and other structures, or the installation surface decorative layer is too thick, and its strength is obviously insufficient, corresponding reinforcement and support measures should be taken to eliminate potential safety hazards.

3. When installing, the connection between the mounting surface and the mounting bracket, and between the mounting bracket and the flat-screen TV should be firm, stable and reliable, so as to ensure that the installed flat-screen TV does not slip, tip or fall. The installation position should be far away from the source of strong electromagnetic interference, and the signal transmission line should be avoided as much as possible from high-voltage lines or other electrical appliances to prevent electromagnetic interference.

Precautions for use:

1. Do not approach the ventilation holes of the plasma display with your hands, face or other objects. The heat coming out of the vents at the top of the plasma display was hot. Never put your hands together.

Approaching this vent is close to the face or other objects that are not resistant to heat, as this will burn or deform the object.

2. Make sure all wires are disconnected before moving the plasma display. If you move the plasma display while some of the wires are not disconnected, the wires may be damaged, causing disaster or electric shock.

3. The power cord must be disconnected from the socket before any cleaning is performed. Failure to do so will result in an electric shock. Clean the power cord regularly to prevent excessive dust accumulation.

4. If the power cord has too much dust, the resulting moisture will damage the insulating surface, which will lead to disasters. Therefore, unplug the power plug from the socket and wipe the power cord clean with a dry cloth.

5. The plasma display emits infrared rays, so it will affect other infrared communication equipment. Do not install infrared communication equipment on the path of direct or reflected light on the plasma display.

Plasma is abbreviated as PDP. When receiving, first pay attention to whether the packaging box is damaged, even if it is not damaged, disassemble the machine, 20-30 cm away from the front of the screen, and check whether the outer screen and content are damaged (cracked) in a bright environment.

Secondly, check the first few pages of the machine manual, and according to the prompts, see if the random accessories are complete.

Then, it needs to be powered on to see if there are dark spots or bright spots, which requires the corresponding signal.

If there is no corresponding signal, you can also check whether there are red and green dark spots through the blue screen signal of the machine.

The installation needs to pay attention to whether the wall is strong, and the hanger can be fixed.

Secondly, we must pay attention to whether the pylon is reliable, the key point is that the pylon cannot be deformed, and the contact PDP surface must be flat, otherwise it will easily lead to screen cracking after long-term use!

There are tall people on it, and there are too many written things.

The Panasonic 42PV8C is a model that has recently been on the market.

All black, can read the card. Other Japanese features are usually available.

The installation factory requirements are Panasonic's after-sales personnel, and the bracket is dedicated and charged.

Just don't have a mockup.

Just look at the effect on the good size.