-
Anonymous users2024-02-15You can coat white wax on the warp silk, or it may be the reason for the silk, you can change the factory to take down the lower silk, and also look at the wire rod, where you can lay the level of the silk behind you.
-
Anonymous users2024-02-14Isn't it okay for the stupid guy to pick it up?
-
Anonymous users2024-02-13Hello dear<>
The answer you are looking for: the reasons for the non-stop breakage of the textile tying machine are as follows: 1. The thread head of the machine is clamped too tightly, which makes the thread end disconnected; 2. The wire end of the machine is loose, and the wire end is disconnected when it is loose; 3. The thread head of the machine is seriously worn, and the thread head is disconnected after wearing; 4. The wire head of the machine is corroded, and the wire head is disconnected after being corroded; 5. The end of the thread is wound incorrectly, which makes the end of the thread disconnected; 6. The temperature is too low, which affects the operation of the machine and causes the wire to be disconnected; 7. There is a collision at the end of the line of the machine, and the end of the line is disconnected after collision.
Therefore, the lower temperature may affect the operation of the machine, resulting in the disconnection of the thread, so attention should be paid to controlling the temperature and keeping the environment pure and the temperature is suitable, which is conducive to the normal operation of the machine.
-
Anonymous users2024-02-12Summary. Pro: This situation may be due to insufficient power supply of the machine or the power cord is faulty, you can first check whether the power cord is damaged and replace it with a new one; If the wire end of the machine is intermittent, it may be due to the internal circuit of the machine or the failure of the machine during operation, then it is necessary to check whether the circuit of the machine is damaged, and if so, you can replace it with a new machine circuit; In addition, it may also be because of a change in the operating environment of the machine, resulting in a broken power cord, you can check the operating temperature of the machine, if the temperature is too high, you can take measures to reduce the temperature of the machine; Finally, it may also be that the thread end of the machine is loose, in this case, you can check whether the thread end of the machine is loose, if it is loose, you can tighten the thread head firmly to ensure that the connection of the wire end is firm.
Pro: This situation may be due to the inexhaustibility of the machine's power supply or the power cord is faulty, you can first check whether the power cord is damaged and replace it with a new one; If the wire end of the machine is intermittent, it may be due to the internal circuit of the machine or the failure of the machine during operation, then it is necessary to check whether the circuit of the machine is damaged, and if so, you can replace it with a new machine circuit; In addition, it may also be because of a change in the operating environment of the machine, resulting in a broken power cord, you can check the operating temperature of the machine, if the temperature is too high, you can take measures to reduce the temperature of the machine; Finally, it may also be that the thread end of the machine is loose, in this case, you can check whether the thread end of the machine is loose, if it is loose, you can fasten the thread firmly to ensure that the connection of the thread is firmly and fine.
The clamping of the wire end of the machine is too tight, so that the wire end is disconnected; 2. The thread end of the machine leather maker is loose, and the thread end is disconnected when it is loose; 3. The wire head of the machine is seriously worn, and the wire head is disconnected after wearing; 4. The wire head of the machine is corroded, and the wire head is disconnected after being corroded; 5. The end of the thread is wound incorrectly, which makes the end of the thread disconnected; 6. The temperature is too low, which affects the operation of the machine and causes the pure and differential wire head to be disconnected; 7. There is a collision at the end of the line of the machine, and the end of the line is disconnected after collision. Therefore, the low temperature may affect the operation of the machine, resulting in the disconnection of the thread, so attention should be paid to controlling the temperature and keeping the ambient temperature suitable, which is conducive to the normal operation of the machine.
-
Anonymous users2024-02-11Good evening, dear, a pleasure to serve you. What is the reason why the circular loom does not stop warping? The steps are as follows1
The warp strength is low 2The ambient temperature or humidity is too low3Position of the propulsion wheel'Incorrect or inflexible operation4
The shuttle tail wheel rotation is not flexible, the domestic circular looms are imitations of foreign imported circular looms, but in the nineties of the last century, this situation gradually changed, China was born for the first time with independent intellectual property rights of the circular loom, and in 1991, 1993, 1997 successively launched the second generation, the third generation, I hope I can help you, if you are satisfied with my service, please give a thumbs up, I wish you all the best!
-
Anonymous users2024-02-10Summary. Hello dear, I am glad to answer for you, and the answer to your query is:1Low warp strength.
2.The ambient temperature or humidity is too low.
3.Position of the propulsion wheel'Incorrect or inflexible operation.
4.The tail wheel of the shuttle does not rotate flexibly.
The above is the answer I have compiled for you, if my answer is helpful to you, I hope you can evaluate my service, your praise is the driving force for me to move forward, thank you for your support, if you have other questions, you can continue to ask me, I am happy to answer for you, I wish you a happy life.
What is the reason why the circular loom does not stop warping?
Please wait patiently for 3 minutes, we are sorting out, and we will answer you immediately, and please do not end the consultation.
Hello dear, I am glad to answer for you, and the answer to your query is:1The warp strength is low 2
The ambient temperature or humidity is too low3Position of the propulsion wheel'Incorrect or inflexible operation4The shuttle tail wheel rotation is not flexible The above is the answer I sorted out for you, if my answer is helpful to you, I hope you can evaluate my service, your praise is the driving force for me to move forward, thank you for your support, if you have other questions you can also continue to ask me, I am happy to answer for you, I wish you a happy life.
-
Anonymous users2024-02-09Low warp strength. The ambient temperature or humidity is too low. Incorrect position or inflexible operation of the propulsion wheel; The tail wheel of the shuttle does not rotate flexibly. The small shuttle is not clean; There are burrs or deficiencies in the filament of the shuttle; There is damage to the shuttle propeller case; The shuttle arm is badly worn; Wire bobbin collapsed wire or hanging wire. I hope mine can help you.
-
Anonymous users2024-02-081. The strength of the weft yarn is too low, loose twisted yarn, large knots, cotton seed chips, and flying flowers are adhered to the silk.
2. The winding is too strong, the tension is too great, and the forming is poor.
3. The side brace is too forward to hit the reed, and there should be a gap of at least 1mm from the reed.
-
Anonymous users2024-02-071 Low weft twist.
2. If the probe is not cleaned in time, it will be misdetected.
3. Spray weft time: early or late.
Hehe, it's just that the emotional intelligence is not very high, and it is not enough to become a mental illness, when I was a child, I was also more timid, and I was timid in doing anything, hehe, but the teacher consciously exercised me at that time, and the more I didn't dare to speak in front of everyone, the more I was asked to be a sports committee member, class leader or something, and give me the opportunity to exercise. Slowly, nothing happened. >>>More
The symptoms you said are the manifestations of urticaria, urticaria is a common allergic disease, when in contact with allergens, there will be red patches of different shapes and sizes in unspecified parts of the body, and these patches will be itchy in the parts where they occur, if you do not stop contacting the allergen and add **, the rash and itching will be.
Hello, pitfalls in the game are very common, and if you can't do it to drive them, then losing will happen often. All you need to do is to lay your own game, drive these pitfalls, adjust your mentality, and don't go with the wind and don't throw against the wind, so that your game wins will definitely improve. After all, you can't always encounter pits, and there may not be no pits on the opposite side, blow up the pit on the opposite side, and bring up the pit on your side, so that you can think about the problem and maintain a good game mentality, and it will be easier to win in the game.
Emotional matters barely came.
Go and like a girl who likes you. >>>More
I'm a boy who's been exposed to the wind and cold, and my whole body is weak, and my joints are getting worse and worse. >>>More