-
There is no 35kV provision in the new version of DL741, which is implemented with reference to the 110kV safety distance.
1. The minimum distance between the wire and the ground: residential area; non-residential areas; 2. The minimum clearance distance between the traverse and the hillside, cliff and rock: the hillside that can be reached on foot; Slopes, cliffs and rocks that cannot be reached on foot.
3, the minimum vertical distance between the wire and the building in the case of the maximum calculated sag 4, the minimum horizontal distance between the side wire and the building in the case of the maximum calculated wind deviation 5, the horizontal distance between the side wire and the building in the case of no wind 6, the safety distance between the wire and the tree when the maximum sag and the maximum wind deviation: the vertical distance at the maximum sag; Clearance distance at maximum wind offset.
7. The minimum vertical distance between the conductor and fruit trees, cash crops, urban greening shrubs and street trees.
-
The horizontal distance should be maintained not less than 40 meters, and when the overhead line is close to the most dangerous facilities, the distance must be maintained not less than the height of the pole.
-
The safe distance of 22kV 35kv high voltage is 1 meter.
5 meters is OK.
But it's better to stay as far away as possible, like some magnetic field, some radiation, whatever.
-
Dear, hello, I am happy to answer for you, before answering the safe distance between the 10kv insulated high-voltage wire and the roof of the house is meters. The minimum distance between the 10,000-volt high-voltage line and the ground should be metered from the building, and the minimum distance between the guide line and the ground should not be less than the following values in the case of the maximum calculated sag: the low-voltage line (380V) through the residential area is not less than 6 meters, and the low-voltage line (380V) through the non-residential area is not less than 5 meters.
Medium-voltage lines (6-10kv) passing through residential areas are not less than meters, and medium-voltage lines (6-10kv) passing through non-residential areas are not less than meters. The 35 110kV line passes through residential areas not less than 7 meters, the 35 110kV line passes through non-residential areas not less than 6 meters, and the 35 110kV line passes through areas with difficult traffic not less than 5 meters. The 154 220kV line passes through residential areas not less than meters, the 35 110kV line passes through non-residential areas not less than meters, and the 35 110kV line passes through areas with difficult traffic not less than meters.
The 330kV line passes through residential areas not less than meters. The 35 110kV line is not less than a meter through the non-resident dusty area, and the 35 110kV line is not less than a meter through the traffic difficult area.
The primary equipment of 35kV substation generally includes transformer DU, voltage transformer, current transformer, isolation switch, DAO circuit breaker, grounding switch, busbar, capacitor, reactor, discharge coil, lightning arrester, combined electrical appliances (combined transformer), switch cabinet and so on. >>>More
Hello, I am glad to answer for you (* 110kV line frame construction scheme cable laying: process: material 1 transportation, storage - cable pipe laying and cable tray installation - insulation resistance test before cable installation - cable laying. >>>More
Can the 101 kV line work after a power outage? You can continue to work after the rain stops, but you can't do it when it rains, and you are afraid of connecting to electricity.
Yes, there are clear regulations to regulate overhead lines of 10kV and below. >>>More
The general construction BAI scheme is aimed at the general construction structure (not complex and specific). >>>More