Is the effect of hardening and polishing of cement floor good?

Through full penetration, its active ingredients can quickly react with the free calcium in the concrete, generate crystalline colloids to fill the structural voids, increase the compactness of the structure, and make the concrete surface form a solid sealing entity, which greatly improves the strength and wear resistance of the surface layer of the concrete structure, so as to obtain a permanently sealed, solid, wear-resistant, dust-free, water-resistant and most industrial chemicals eroded surface. Curing plugging will not wear out with use like the surface coating, and the concrete sealing curing agent will make the concrete harder and harder because it permanently locks the pores, and the sealing performance is getting better and better. And there is a polishing effect, the longer you use it, the better the sensory effect!

Youshili penetrating seal hardener can effectively extend the life of concrete for more than 20 years......

The polished ground can achieve the following effects.

1. Solve the problem of ground ash and sand: there is no need to find someone to deal with the problem of ground ash and sand, hardening and polishing can be solved at one time and benefit for life.

2. Beautiful appearance: the ground is flat and hard, smooth and clean, and achieves the effect of marble, with the characteristics of brighter and brighter the grinding.

3. Increase the lifespan: The life of the ground after hardening and polishing can be more than doubled for up to 20 years.

4. Improve the ground indicators: Mohs hardness reaches more than 8 degrees; Enhanced permeability resistance; The compressive strength reaches 40% for more than 7 days, and the wear resistance can be increased by 60%; Improved impact resistance. It is fully able to meet the needs of daily production.

Cement floors can be polished.

Cement floor is also one of the common ground, then the grinding and polishing of the cement floor is to polish the surface layer of the ground on the basis of the existing cement floor, level the ground, remove the surface oil, dust, sand layer, fill the potholes, cracks, and use Seiko concrete sealing curing agent and concrete repair mortar for auxiliary construction.

Fundamentally solve the dust, sand, oil, potholes, cracks, unevenness, poor cleaning and other shortcomings of the original cement floor, and at the same time increase the brightness of the ground and increase the aesthetics.

Operational construction method of cement floor

1. The grinding machine used for grinding the cement floor is mainly to grind off the flatness of the repair surface of dirt, paint and glue on the ground, because the cement floor hardener is a functional coating, which can be strengthened, but there is no way to produce new characteristics.

2. The requirements for the ground should be fully dried, the moisture content should be less than 7%, and the surface of the construction can be directly applied, and the hardener of the cement floor should be chemically reacted with the penetrating cement floor and the cement, which can improve the density of the cement and strengthen the hardness of the ground.

3. The ground should be ground as a whole.

Cement floor is also one of our common ground, suitable for electrical appliances, machinery, food, medicine and other workshops, the service life of cement floor is very long, can reach about 10 years, the use is also very convenient, is colorless liquid and concrete mixed to form a wear-resistant and dust-proof dense entity.

4. Spray construction with a roller or a special spraying machine, and the roller should be evenly and vertically rolled on the ground, try to avoid the roller sticking to sundries or lint on the roller, and use the roller to stick away the wool that is easy to take off with tape paper.

5. After using colored cement floor penetrant, the color is uniform and consistent without color difference, so as to achieve a clean and beautiful effect.

Hello. After hardening, the cement floor can be polished to form a good gloss and achieve a good apparent effect. 1. Water mill ground:

For the concrete floor with serious sand and ash, the purpose of Chunhe is to polish the ground and remove the ground glue, paint, plain cement slurry and other attachments. Then use a terrazzo machine to assemble a diamond grinding block to grind the ground to further improve the smoothness and flatness of the cement floor, remove the surface and mud hunger, and dry the ground for later use. 2. Hardening treatment

Component A of cement floor sand treatment agent, diluted with water and sprayed on the cement concrete floor that has been ground by water, using a grinder or stone refurbishment rotten forest section machine to assemble diamond soft grinding discs, grinding and washing the ground in turn, in order to ensure the polishing effect, each time after grinding, it is necessary to clean and dry the ground mud with a suction machine. 3. Polishing treatment: The hardened cement floor is dried, and the ground polishing machine is equipped with diamond soft grinding disc for polishing and crystallization.

Summary. Hello, pro, cement floor polishing process, refers to the cement floor after hardening by concrete sealing curing agent material, the use of mechanical grinding and polishing process. The industry usually refers to this process as the curing floor process, that is, the polished concrete floor, but the two are called differently.

Hello, pro, cement floor polishing process refers to the process of using mechanical grinding and polishing after the cement base is hardened by the concrete sealing curing agent material. The industry usually refers to this process as the curing floor process, that is, the lead carefully polished concrete floor, and the two are just the same name.

The concrete floor can be polished.

The concrete sealing curing agent used in the construction is a very practical chemical building material, the material reacts with the cement components in the ground, and will produce a strong and dense hydrated calcium silicate substance, and then seal the hardened concrete structure, and continuously increase the hardness and wear resistance of the first concrete per mu; After polishing in the later stage, it can form a strong as steel and bright as a mirror. Concrete sealing and curing agent is a widely used concrete sealant, hardener and dustproof agent in the construction industry, which is often used in factory workshops, underground garages and other places, and is an important means to create high-strength and defect-resistant floors, dust-free floors and impermeable floors.

The grinding and polishing methods of cement floor are as follows: 1. Base surface treatment: use a refurbishment machine to remove the loose surface layer, and the hollow drum part is treated separately.

2. Damage repair: repair with repair materials. 3. Leveling:

Use of floor refurbishment machine with floor grinding disc (water mill or dry grinding); 4. Coarse grinding: use No. 50-200 floor grinding disc (water grinding or dry grinding). 5. Osmotic treatment

Hardened with a concrete sealing curing agent. 6. Fine grinding: use 200-300 floor grinding disc (water mill or dry grinding).

1. Waxing and polishing of cement floor, the gloss of the treated cement floor increases, and at the same time, it can play a waterproof and anti-fouling effect. 2. The gloss of the cement floor after grinding and polishing increases, which can play a good decoration effect. 3. The cement floor is transformed into a cement infiltration floor, and the cement floor after the transformation of concrete sealing and curing agent not only has the gloss of marble, but also improves its surface hardness, resistance to scattering and wearing, and prevents sand and dust.

What does cement floor curing mean, there are still many people who don't know much about these, cement roads are created, so that it looks like the ground is relatively flat, and there will be no sanding, so the source of cement floor curing is also a very critical decoration step.

Cement floor curing and polishing.

Cement floor curing and polishing is the process of transforming a monotonous and rough concrete surface into an elegant and durable floor. Concrete surfaces are ground and polished using the most efficient high-speed and high-power grinding equipment. First the hail sedan was made of concrete, and then the durable floor was ground to a very flat surface using medium abrasive plates.

The unit is also equipped with a dust-free vacuum system, which can absorb and filter dust from the curing and polishing of the cement floor. It is a clean flooring system with no harmful sail dust in the air, while providing an elegant and easy-to-maintain floor.

Advantages of cement floor curing and polishing.

1. Wear-resistant. The hardener on the cement surface can increase the hardness of the concrete through several hard solids. After the surface is matured with DELI solid hardener, the wear resistance is increased by 8 times.

2. Firmness. After the hardness of the cement surface is increased, the hardness is 9 Mohs.

3. Dustproof. The cement surface hardener and calcium oxide from the concrete react and react on the concrete surface to form a dense monolithic powder and permanently control the dust-free surface of the concrete.

4. Non-slip. In general, the concrete surface is precipitated, the hardener surface is smooth, and the concrete surface is strong and dense.

5. Compression-resistant. Compared to the untreated test, the compressive strength increased by a factor of 3.

6. Waterproof. Energy efficiency penetrates and reacts with concrete to clog pore surfaces. The concrete surface is permanently sealed to prevent water and oil from effectively entering the concrete.

7. Resistant to bad weather.

Treatment with ultraviolet light and water does not work well, and the energy efficiency prevents chlorine gas from passing through. Tests have shown that the exposed surface of the treated surface is affected by electromagnetic or water mist.

8. Corrosion resistance.

The treated surface improves the corrosion resistance of the concrete.

9. Bright. Concrete slabs treated with a hardener on the cement surface are now stone shiny, and the longer the gloss is used.

There are many more benefits of curing and polishing cement floors, and this step is still very important.

Concrete floors are usually polished and polished to make the ground look flat and not sanded, but many people don't particularly know about itCement floor polishing。So what isCement floor polishingCuring? What are the advantages of cement floor curing and polishing?

Let's find out.

Cement floor polishingCuring is the process of turning a rough, monotonous concrete surface into an elegant, durable floor. The concrete surface is first removed using a series of coarse-grained diamond slabs, and then the durable floor is ground to a very flat surface using medium abrasive plates.

Concrete surfaces are ground and polished using the most efficient high-speed, high-power grinding equipment.

1. Abrasion resistance: The hardness of various solidified hard solid concrete can be improved by cement surface hardener, and the hardness is cured by the surface of Deli solid hardener, and the wear resistance is increased by 8 times.

2. Hardness: treated with cement surface hardener, the Mohs hardness can reach 9 Mohs hardness.

3. Dust: cement surface hardener and concrete calcium oxide react to concrete surface dust, which is overall dense and permanently controls the void analysis of concrete dust surface.

4. Anti-slip: The general surface is analyzed by the salt and concrete surface slippery solid hardener surface and the concrete surface shape solid, dense overall salt water surface.

5. Compressive strength: Compared with the untreated test, the compressive strength has increased by 3 times.

6. Impermeability: Energy Zheng You penetrates into the concrete and reacts with it to lock the pore surface. The concrete surface is permanently sealed, effectively inhibiting water and oil from entering the concrete.

7. Resistance to weathering: UV and water spray treatment has no good effect, energy efficiency prevents chlorine from passing, and tests show that exposed electromagnetic or water mist is affected by the treated surface.

8. Corrosion resistance: passedCement floor polishingThe treated surface improves the corrosion resistance of the concrete.

9. Brightness: The concrete slab is treated with a surface hardener of the pin mud with water, and it is now marble-like. The longer the gloss.

10. Environmental protection: cement surface curing agent type concrete sealing, dustproof, wear-resistant curing agent color, odor, poison, combustion, can make the concrete strong and dustproof; It can prevent moisture, oil penetration, alkalization, weathering, etc.

That's itCement floor polishingAnd the advantages of curing analysis, I hope it can help you!

You can get it for free

Advantages: 1. The surface of the polished cement floor is smooth, and after fine polishing, it has good slip resistance, high safety, and is not easy to slip and dress early;

2. The polished cement floor has super wear resistance, smooth surface, anti-pollution, moisture-resistant, strong corrosion resistance, and very wear-resistant;

3. The polished cement floor can almost be indoor moisture-proof, and the acid and alkali resistance is also very good, with a high degree of cleanliness, delicate texture, smooth surface and easy maintenance;

4. The polished cement floor is well decorative, and a variety of sensitive colors can be selected, which can meet the requirements of different decorative styles;

5. Polished cement flooring is more affordable, more affordable than other indoor flooring materials, and can be used for a long time, and is cost-effective.

Disadvantages: 1. The polished cement floor is prone to hollowing during construction, and it is necessary to strengthen the construction quality control during the construction process;

2. The polished cement floor needs to be maintained regularly, and the surface of the polished cement floor is relatively smooth and easy to be polluted, so regular maintenance is very necessary;

3. The polished cement floor has certain gaps, which makes it easier to be polluted and easy to form bacteria, so the polished cement floor should be cleaned regularly to keep the ground clean;

4. Polishing the cement floor requires the use of more cement, so the quality should be ensured during the construction process to avoid slurry leakage and hollowing;

5. The construction process of polishing the cement floor is more cumbersome, and it needs to be polished many times, so the construction time is longer, and more energy and time are required.