What should I do if the water dispenser smells rusty after cleaning

At home, you can clean the water dispenser by yourself, take a fresh lemon, slice it, remove the seeds, put it in the water dispenser and cook it for two or three hours, and you can also remove limescale and odor. In addition, when the water dispenser is out of use for a long time, the power should be turned off, the drinking bucket should be removed, and the water in the water dispenser should be drained.

If the hot and cold water bile in the bottled water dispenser is not washed for three months, it will multiply bacteria, viruses, sediment residues, heavy metals and even bloodworms, which will seriously endanger people's health.

The water dispenser is usually the barrel neck of the bottled water upside down and placed on the "smart seat" of the water dispenser, and then the hose in the machine will introduce the water into two water galls, one of which is a hot water tank and the other is a cold water tank, in addition to the function of cold and hot water, these two water galls can also play a role in precipitating impurities in the water. People usually change the bottled water repeatedly, but ignore that there is still a certain amount of water in the inner tank of the water dispenser, which will hide disease-causing bacteria, and over time, it will naturally become a breeding ground for bacteria. Consumers often have such misunderstandings that the water dispenser itself is a water purification device, and the bottled mineral water is clean, even if the water dispenser is not cleaned and disinfected regularly, there will be no problem, so there will be all kinds of foreign substances in the water.

Therefore, the water dispenser must be thoroughly cleaned and disinfected regularly, and the commonly used method is to clean it with disinfectant solution, and then flush the water dispenser with clean bottled water until the residue of the disinfectant solution is washed away.

Steps to clean the water dispenser:

1.cut off the power of the water dispenser;

2.Insert the 5-gallon water bottle vertically down into the smart seat on the upper part of the machine, turn on the red hot water faucet and the blue cold water faucet until the water is released, then turn off the faucet, and then hold the bottle with both hands and take out the water bottle upwards;

3.Cleaning the outside of the water dispenser and the smart seat;

4.Pour 600ml of special cleaning and disinfectant solution into the water storage tank;

After a few minutes, turn on the red and green faucets until the disinfectant is exhausted;

6.Unscrew the water drain valve at the back or bottom of the machine to drain the disinfectant in the water dispenser;

7.Rinse several times with boiling or purified water;

8.Tighten the drain valve, and the disinfection and sterilization operation procedures are completed.

Try replacing the rubber lines in the water dispenser.

Hello, there may be two situations when the water dispenser smells, the first is that the newly bought water dispenser has just been used (it may not be of good quality), and the second is that the water dispenser has not been cleaned for a long time. The newly bought water dispenser has a peculiar smell.

Don't worry if it smells, we can clean it first and use it after a while. If you are in a hurry to use it, you can find some tea leaves to brew into strong tea with boiling water, filter out the tea leaves, then take off the water dispenser jug, drain the water in the inner tank with a faucet, and then pour the tea from above, let it go for half an hour and then put the tea out, and it's good.

If it has been used for a long time and has a peculiar smell, in this case, you can generally use a professional disinfectant to clean the water dispenser, and you can also use lemon to eliminate the peculiar smell.

a) Steps for lemon to eliminate odors:

Before removing the odor, unplug the water dispenser, then put all the water out, cut a lemon into 2 halves, (you can also use 2) prepare a small basin, put about 600ml of water in it, and squeeze out the juice.

Be careful not to squeeze the pulp of the lemon in, if it accidentally falls into the water, you must filter it out, otherwise it will block the place where the water comes out), pour the prepared lemonade into the water storage tank, and put the bucket into the water dispenser.

on, and then press the switch to boil water for about an hour, this time from the back of the water dispenser to release water, there is a large water outlet behind, open the valve, those scales will come out, some scale is relatively large, you can take a toothpick to dig it.

On the line, it is easier and safer to clean.

2) Steps to clean the water dispenser with disinfectant:

1.The water dispenser must first be powered off, and then the empty bucket must be removed (remove the lid attached to the bucket from the water dispenser to reveal the water dispenser's water control tank, which is where impurities and bacteria are most likely to be deposited).

2.Then, clean the surface of the fuselage with neutral dish soap, and use a dry cloth or alcohol cotton ball to clean the water inlet, faucet, water tray and other parts; Unscrew the drain valve of the water dispenser (the drain valve is usually located on the back of the water dispenser) and drain the water in the body.

3.Subsequently, scrub off the limescale from the water storage tank with a clean cloth and pour the water dispenser cleaner into the water storage tank. After heating for five minutes, the power is turned off (heating can better make the medicine and water react more fully), and soak for about 30 minutes.

4.After soaking, open the hot and cold water outlet of the water dispenser, release the cleaning solution, pour boiling water or bottled water, continuously rinse the entire cavity of the water dispenser, and then turn on all switches to drain the rinsing liquid. Do this step as many times as possible until the water is free of chlorine smell before drinking.

5.Finally, tighten the drain valve and scrub the outer wall of the fuselage again with disinfectant to complete the entire disinfection process.

The newly bought water dispenser has a taste removal method: find some tea, about 100g, do not use good tea, as long as it does not deteriorate, and then brew with 1L boiling water, after brewing for an hour, the tea becomes very strong, filter out the tea, and then take off the water dispenser jug, put the water in the inner tank with a faucet, and then pour the tea from above, put it for half an hour and then put the tea out, it's good. Hope it helps!

When a water dispenser smells of rust, it could mean that there is rust, bacteria, or other contaminants in the tank. This taste not only affects the taste of the water, but can also have an impact on the health of family members. Therefore, we need to take appropriate measures to solve this problem.

Here are some possible solutions:

Clean the water tank: First, make sure that the inside of the tank is clean. You can use a special detergent or white vinegar water to clean the tank.

Before cleaning, drain all the water inside the water tank, then add detergent or white vinegar water to the water tank, let it stand for 10-15 minutes, and then wash it with clean water.

Replace the filter: If your water dispenser has been in use for a while, the filter may already need to be replaced. If the filter cartridge does not effectively filter impurities such as rust, it will cause the water to have an odor.

The filter can be removed to check if it needs to be replaced. If it needs to be replaced, please select the appropriate filter for the Quewei model.

Regular maintenance: Water dispensers need regular maintenance, such as washing the faucet and disassembling the water tank for cleaning, etc. This prevents contamination such as bacteria from forming inside the tank. Maintenance is recommended every six months.

Buy a water dispenser with guaranteed quality: If you need to buy a new water dispenser, you can choose products from well-known brands. These products are strictly produced and inspected to ensure quality.

In short, in order to protect health, we need to keep the water dispenser clean and maintain it regularly, and choose products with quality assurance. Only in this way can the health and quality of drinking water be ensured.

Water dispenser is an indispensable electrical appliance in our daily life, which can provide us with clean and hygienic drinking water. However, after long-term use, some rust may appear in the water tank of the water dispenser, which will affect the use effect and even endanger our health if not treated in time. So, how to deal with water dispenser rust?

Here are some ways to do it:

1. Clean according to the instructions.

Each water dispenser is accompanied by a corresponding instruction manual with detailed instructions on how to clean it. You can clean according to the instructions, generally you need to remove the water tank and pipeline for cleaning, the choice of detergent can refer to the suggestions on the manual, if you are not at ease, you can choose a professional water dispenser cleaning service.

2. Clean with vinegar water.

If the rust is not very severe, vinegar water can be used for cleaning. Mix the white vinegar and water in a ratio of 1:2, then pour the mixture into the water tank of the water dispenser, start the air balance water dispenser, and let the mixture flow into the pipe.

Let it sit for 1-2 hours, then pour out the mixture from the tank and rinse the tank and pipes with clean water.

3. Wash with citric acid.

Neutral citric acid is also an effective way to clean your water dispenser. Mix citric acid and water in a ratio of 1:3 and wash as described above.

4. Replace the filter element.

If the rust still exists after cleaning the above methods, it means that the filter element may have reached the replacement period, and it is recommended to replace the filter cartridge.

In short, we must pay attention to safety and hygiene when cleaning the water dispenser, and take the right method to effectively remove the rust and ensure that the water dispenser can provide us with safe and hygienic drinking water.

Water dispenser, as a necessary item in our daily life, its maintenance and cleaning are also very important. Among them, cleaning the rust inside the water dispenser is a critical task. Rust is a substance formed by minerals contained in water, and if not cleaned up in time, it will affect the service life and water quality of the water dispenser.

Here are some ways to clean up rust in your water dispenser:

1.Use white vinegar to clean.

Pour the white vinegar into the water dispenser and let it soak for 10-15 minutes, then turn on the machine to remove the vinegar water. White vinegar is rich in acetic acid, which can effectively decompose rust and bacteria and clean the waterways.

2.Use soaking wood residue.

Add some wood residue to the water dispenser and some white vinegar during the soaking process, which is mild and effective. Pay attention to the ** of wood residue must be clean and hygienic.

3.Wash with soda.

Drain all the water in the water dispenser, then inject the soda into the machine, let it be cleaned for 10min-15min and then discharged. The alkaline substances in the sparkling water can neutralize the acidic substances in the water dispenser and ensure the effectiveness of the cleaning.

4.Use a special cleaner.

The special cleaner for water dispensers distributed by large supermarkets and department stores is more effective, but try not to use it blindly, and use it in accordance with the requirements of the detergent instructions.

5.Change the source of water.

Some water sources contain more minerals, which can sometimes accelerate the formation of rust, in which case it is recommended to put a piece of activated carbon in the water dispenser to filter and clean up the water.

In the above methods, it is recommended to use natural, healthy detergents to clean the inside of the water dispenser regularly, so as to maintain the normal use of the water dispenser and provide safe and reliable high-quality drinking water service. In addition, it is recommended to clean the water dispenser every three months or so to ensure the hygienic quality of the water dispenser and safeguard our health.

How to remove the rusty iron.

1. Sour vinegar method.

Heat the iron first, then dip a towel in vinegar and apply it to the rusty area so that the rust will fall off.

2. Wash rice water.

Soak the rusty iron in thick rice washing water for three or four hours, then boil the rice washing water, put the iron into the rice washing water and stir in the process, and finally rinse it with clean water.

3. Iron wire balls.

If there is not a lot of rust, you can use the wire ball to grind it off little by little, then clean it, and then heat the iron and apply oil, so that the back part is easy to rust.

4. Sandpaper or whetstone.

If you have sandpaper at home, you can use it to grind off rust, although it is more troublesome, but it is more thorough to remove, and you can also use a whetstone instead of sandpaper.

5. Chemical rust removal.

Some chemicals can be used, such as hydrochloric acid or dilute sulfuric acid.

and so on, they will follow the iron oxide.

changes and is able to dissolve rust.

How to prevent iron from rusting.

1. Reduce contact with water.

Usually we must dry the water in time after using iron products and place them in a ventilated location, otherwise the residual water stains will cause the iron to rust.

2. Reduce contact with acidic items.

It must not come into contact with acidic things, otherwise there will be a chemical reaction.

Causes rust. The iron spoon we commonly use should not be soaked in vinegar, and the knife that cuts the sour fruit should be cleaned and dried in time, otherwise it may cause rust.

Rust of water dispenser heater is a very common phenomenon, if not treated in time, it will bring great harm to our body, because the quality of the water we drink will deteriorate. So, what to do if the water dispenser heater is rusty? Here are some workarounds:

1.Clean the heater: The first thing you need to do is to clean the heater, and generally the rusty place is the inside of the tank and heater.

The heater can be cleaned with the help of some cleaning agents that are specially designed to clean up rust. Be safe when cleaning and keep the detergent out of direct contact** or eyes.

2.Replace the heater: If the problem is not resolved after the cleanup, then the heater may need to be replaced. Replacing the entire heater can effectively solve the problem of rust, but you need to pay attention to choosing a good quality product.

3.Install filters: To avoid rust in the heater, we can also add filters to the water dispenser. Filters filter out impurities in the water, making the water more pure, reducing the likelihood of rust in the water dispenser heater.

4.Regular maintenance: In order to make the water dispenser last for a long time, we need to maintain the water dispenser regularly. The tank and heater can be cleaned at regular intervals, which can effectively avoid the problem of rusting of the heater.

To sum up, rusty water dispenser heaters are a common problem, but as long as they are dealt with promptly, we can avoid turning it into a bigger trouble. Therefore, we need to keep the water dispenser clean, maintain and replace the heater regularly.