Is it that the red light of the water dispenser is boiling, and the green light water is not boiling

Updated on healthy 2024-08-01
13 answers
  1. Anonymous users2024-02-15

    Conversely, a red light indicates that water is boiling while a green light indicates that the water is boiling and ready to drink, and if it is still red, it is advisable to wait.

  2. Anonymous users2024-02-14

    What you said about this situation is not right,Under normal circumstances, if the water dispenser is red light, in this case, it belongs to the working period,At this time, its water temperature drops to about 55 and it will be automatically heated,There will be an automatic thermostat inside,If the water is boiled to a corresponding higher than 95 at this time,At this time, the green light will be on,So at this time, the water is boiling,But it will not reach 100 degrees,And this TV can use the design of top water, This means that if you release about 5 litres of seawater, it will add the same 5 litres of cold water, so the temperature will decrease as you use it.

  3. Anonymous users2024-02-13

    No. Generally, the red light of the water dispenser is in the heating state, and the green light is when the water is boiled in the heat preservation state.

  4. Anonymous users2024-02-12

    Yes, a red light means that water is boiling, and when it is turned on, it will turn into a yellow light.

  5. Anonymous users2024-02-11

    The red light of the water dispenser should mean that the water temperature is very high and very hot, and if the green light is green, it means that the water temperature is not high and not hot.

  6. Anonymous users2024-02-10

    The green light means that the drinking water operation can be carried out, just like the traffic light, the green light is green, and the red light is heating and not on.

  7. Anonymous users2024-02-09

    Look at the instruction manual. Regular products will have instructions.

    Usually the red light of the water dispenser is in the state of boiling water.

    The green light indicates that the power supply is normal and shows the power over status.

  8. Anonymous users2024-02-08

    The red light heats up, and the green light boils on.

  9. Anonymous users2024-02-07

    The opposite is true.

  10. Anonymous users2024-02-06

    Possible reasons: 1. The power supply is not connected; 2. The fuse tube is burned out; 3. The circuit board is broken.

    Recommended solutions: 1. Check whether the heating switch is placed in the "on" position. power supply and whether there is electricity at the outlet; 2. Replace the fuse; 3. Replace the circuit board.

    2. The indicator light of the water dispenser is on but not heated.

    Possible causes: 1. The heating tube burns out; 2. a thermostat.

    Bad. Recommended solutions: 1. Replace the heating tube; 2. Replace the thermostat.

    The specific situation that the water dispenser is not heated.

    The first case: the water dispenser is not electrified, does not heat or cool.

    1. Check the power outlet.

    Whether there is electricity, if it is not connected, it should be connected in time.

    2. Check whether the contact between the power plug and the socket is reliable, and plug it firmly if it is loose.

    3. Check whether the connection of the internal and external power supply of the machine is disconnected, and whether it falls off from the plug-in? If there is, connect well.

    The second case: the water dispenser indicator light is on, but it is not heated.

    1. The first is to check the fuse, the fuse should be in the back of the water dispenser, it is an insulated plastic head, a screwable protruding part, gently unscrewed in the counterclockwise direction, some water dispensers are to open the back cover to find, if there are symmetrical two on the left and right sides, it is not the fuse base, it is the drain pipe when cleaning. The fuse is a separate one, and the color is also different. Go and buy two or three according to this model number for later use.

    2. Use a multimeter.

    Measure the resistance of the heating tube. If it's low or zero, it should mean that the heating tube is broken.

    3. a connector.

    That is, the plug part may be in poor contact, or the neutral wire of this plug is short-circuited, so that there is electricity when you test the socket, and there should be electricity on both wires.

    4. Due to long-term use, the power cord of the water dispenser may be internally disconnected, as long as one of the wires is broken, the water dispenser will have no power input.

    5. The internal power input part of the water dispenser is disconnected due to corrosion and oxidation due to long-term wetness.

    The third case: temperature control switch.

    Jumped away, or the thermostat was damaged.

    Open the lid on the back of the water dispenser and you should be able to see the canister used to heat the water. Generally, there are two round things facing you with two strands of wire, that is, the thermostat, generally the lower one is used for repairable temperature control, characterized by a small button, you use a chopsticks to top the button to see if the water dispenser is good, if it is still the same, it must be the temperature control is broken. Only replaced.

    The fourth case: Qinyuan.

    The brand water dispenser is not heated, the power light is on, it cannot be heated, there is no hot water, and the heating indicator light will not be on.

    The main thing is that the insurance inside the water dispenser jumped. Disassemble the back panel of the water dispenser, there is a black button, and you can reset it.

    Do you have a general understanding of the reasons why the water dispenser does not heat? If the water dispenser at home is not heated, you are a repairman, it is simple, easy and fast, and you can repair the water dispenser.

  11. Anonymous users2024-02-05

    Summary. I'm glad to answer for you, the water dispenser water boils the light and doesn't jump because the thermostat is broken, you go to the home appliance repair to change it, and you can get it for more than 10 yuan (

    Pro: What's going on with the water dispenser water boiling the light and not jumping.

    I'm glad to answer for you, the water in the water dispenser boils the light and does not jump is the thermostat is broken, you go to the slag digging home such as taking the nuclear power maintenance judgment that change it, 10 yuan can be done ( pro

    Why don't you jump the green light when the water dispenser is turned on, and the thermostat is replaced with a new one.

    Dear, I'm glad to answer for you, if this is the case, first judge whether you use the ruler Zen water dispenser of Hui Sleepy Zen has the function of measuring the green light after the heating is completed, if there is, but it can be heated and the heating will stop after the heating is completed, indicating that the problem does not affect the use. If it won't be heated, then there may be a problem with the heating system.

    Listen close to the water dispenser to see if there is a sound of boiling water.

    Pro( Pay attention to safety, be careful not to burn <>

    If the green light jumps in the water dispenser, it is tripping, that is, the thermostat is under control, it keeps burning, it keeps heating, and it still doesn't jump, it is broken.

  12. Anonymous users2024-02-04

    Summary. Hello dear, glad to answer for you, <>

    Is the water boiler still boiling water when the green light is on, and the water is not released, and it turns red again? Answer: The green light is green, which means that the water has not been boiled; The red light is on and the red light is on to indicate that the water is boiled, and the water is boiled and can be drunk with water. If there is a display light on the water boiler, if the green light is on, it means that it is boiling water, and if the red light is on, it is not on, if the display light is broken, listen with your ears, and hear a snap to indicate that it is boiling water.

    The red light stopped, and the water was boiling. The green light is not boiled, it is the same as the traffic light, the red light stops, and the green light goes. When the electricity is turned on, a small red light will light up on the body of the kettle, and when the water is boiled, the small light will turn into a blue insulated state.

    The red color on the water boiler indicates that it is heating up and is temporarily undrinkable, while the green color indicates that the water has been boiled and is ready to drink.

    Is the water boiler still boiling water when the green light is on, and the water is not released, and it turns red again?

    Hello dear, glad to answer for you, <>

    Is the water boiler still boiling water when the green light is on, and the water is not released, and it turns red again? Answer: The green light is green, which means that the water has not been boiled; The red light is on and the red light is on to indicate that the water is boiled, and the water is boiled and can be drunk with water. If there is a display light on the water boiler, if the green light is on, it means that it is boiling water, and if the red light is on, it is not on, if the display light is broken, listen with your ears, and hear a snap sound to indicate that it is boiling water.

    The red light stopped, and the water was boiling. The green light is not boiled, it is the same as the traffic light, the red light stops, and the green light goes. When the electricity is turned on, a small red light will light up on the body of the kettle, and when the water is boiled, the small light will turn into a blue thermal insulation state.

    The red color on the water boiler indicates that it is heating and cannot be drunk for the time being, while the green color indicates that the water is boiling and ready to drink.

    The green light shows that the water is turned on and drinkable, but the red light is turned on after the interval of no water, indicating that the water has cooled down, or is it not boiling water?

    Yes. Can I put it in and drink it?

    Is there a red light that lights up after cold water cools down?

    You can drink it. You'll have to wait for the green light before you can drink it.

    Ok thanks! Uh-huh.

  13. Anonymous users2024-02-03

    The red light of the water dispenser is not boiling water, and when the indicator light of the water dispenser is on, it means that the water is not on and is being heated.

    A water dispenser is a device that heats or cools bottled purified water (or mineral water) and makes it convenient for people to drink. Bottled water is placed above the machine, which is used in conjunction with bottled water. Water dispensers are divided into three types: warm, ice-hot, and ice-warm, and ice-hot Qinzhou, and the ice heater is divided into two types: semiconductor refrigerated water dispenser and compressor-type pure sail cold water dispenser.

Related questions
10 answers2024-08-01

Water dispensers sometimes leak in use, and the reasons for water dispenser leakage can be roughly divided into two points: >>>More

15 answers2024-08-01

Water leaking from the safe ozone generator should overflow after the tank is full. It's the bucket on top that has a problem. Drain all the water from your water dispenser. >>>More

8 answers2024-08-01

1. If you are using bottled water, it is estimated that it is caused by the leakage of the bucket. The point of leakage is between the mouth of the bucket and the cap of the bottle. All bottled water is refilled. >>>More

4 answers2024-08-01

1. The low-pressure solenoid valve is broken or blocked. >>>More

7 answers2024-08-01

In our lives, there will inevitably be some small accidents, for example, the most common thing in daily life is that the water pipe is blocked, or the bathroom faucet can't stop the flow of water, which are small problems that we may encounter in our daily life. In fact, there will be problems with the various machines and equipment we use in our lives. Let's say our rice cooker lights go out, or our water dispenser is clogged. >>>More