The wireless router light keeps flashing and can t connect to the Internet?

Restart the router first, and after restarting, as long as it can connect normally. If it doesn't connect properly, plug the network cable back in. Check if the broadband signal light is not normal, if so, it is the operator's network problem, call the operator directly and ask them to repair it.

1. Call the operator's customer service** to see if there is any problem with the external network. 2. Reseat the network cable once The network cable from the cat is connected to the WAN port of the wireless router, and the computer is connected to any LAN port of the wireless router. 3. Turn off the cat and the wireless router and turn them on, and take a look later.

Fourth, if it still doesn't work, set up the wireless router again. Do you need to dial up the broadband cat to connect to the wireless router, you do this: plug in the wireless router, don't answer the cat first, reset the wireless router (factory reset), connect the computer to any LAN port of the wireless router, enter the router gateway address in the browser address bar (there is on the label behind the router), enter the settings page, and set it according to the PPPoe (ADSL virtual dialing) method.

Then set the SSID, encryption method, and password. Save, restart. After setting, connect the network cable from the cat LAN port to the WAN port of the wireless router.

The design of the indicator light of different routers is not the same, to explain which indicator light is flashing, it is best to send a ** up, usually the router can be connected, and the device can not access the Internet, in this case, first make sure that the router parameters are set correctly, if there is no problem before, and suddenly there is no Internet access, then you can restart the router to try first, if it can't be solved, check whether the connection between the router and the optical modem is normal, whether the working indicator of the optical modem is normal, and determine whether the broadband is in arrears, If these problems do not exist, it is generally a network line problem of the operator, and the operator should be consulted to solve it.

Do you use a wireless router installed when you run broadband? If it is, you can cut off the power first, wait a while and then connect it, if it doesn't work, just call ** to manually tell him this situation, he is estimated to give you a kick first, and then basically you can get on, if you still can't, you have to report the fault and let the maintenance personnel deal with it.

The first thing that should be thought of when connecting to the Internet is whether there is a problem with some settings of the system, then you need to set the system network connection accordingly. Right-click on the network icon to open the network sharing center to see what the network connection is like.

1. Normal flashing, signal light flashing means that there is network data in transmission.

2. If the mobile phone can be connected to wireless but cannot be used, see if there is a problem with the router's Internet parameter settings, if it is suddenly unable to access the Internet, it is recommended to restart the router to see if it can be solved.

A wireless router is a router that is used for users to surf the Internet and has a wireless coverage function. A wireless router can be seen as a device that sends broadband network signals from the wall of your home to nearby wireless network devices (laptops, Wi-Fi-enabled mobile phones, tablets, and all Wi-Fi enabled devices) through the antenna. Popular wireless routers on the market generally support four access modes: dedicated line XDSL cable, dynamic XDSL, and PPTP, and it also has some other network management functions, such as DHCP service, NAT firewall, MAC address filtering, dynamic domain name and other functions.

Popular wireless routers on the market generally can only support 15-20 devices at the same time. The signal range of a general wireless router is 50 meters, and now some wireless routers have a signal range of 300 meters.

Summary. The router lights are on, first see which lights are on. The router has a power light, a WAN port light, and a LAN port light.

If the power light is on, it means that the power is normal. The light corresponding to the LAN port also has the light of the wireless network, and the faster it flashes, the faster the data traffic is used. If the WAN port light is on, the WAN port line connection is normal.

If it is all on, log in to the router to see if the IP address can be obtained normally and whether there is a problem with the router settings. If it still doesn't work after trying, restore the default settings and set it again. If that doesn't work, try switching to a different router.

The router lights are on, first see which lights are on. The router has a power light, a WAN port light, and a LAN port light. If the power light is on, it means that the power is normal.

The light corresponding to the LAN port also has the light of the wireless network, and the faster it flashes, the faster the data traffic is used. If the WAN port light is on, the WAN port line connection is normal. If it is all on, log in to the router to see if the IP address can be obtained normally and whether there is a problem with the router settings.

If it still doesn't work after trying, restore the default settings and set it again. If that doesn't work, try switching to a different router.

Hope it helps.

Summary. As far as the description is concerned, it is obvious that the router cannot be connected to the Internet. The network equipment on the next level of the router is not working properly. For example, it is recommended to check whether the light signal light of the modem is green.

In addition, wifi is an invisible network cable, connecting to wifi is connecting to a router, and that's it.

Why does the router light flash to connect to wireless but not to the Internet?

As far as the description is concerned, it is obvious that the router cannot be connected to the Internet. The network equipment on the next level of the router is not working properly. For example, it is recommended to check whether the light signal light of the modem is green.

In addition, the fire only touches, wifi is an invisible network cable, connected to wifi is connected to the router in the mountains, that's all.

I couldn't connect to the wifi when I used it normally.

Didn't prompt, only now see it. I'm sorry.

In this case, the router will be powered off for 15 minutes and then powered on.