How to dispose of waste from wood processing plants with wood chippers

The scraps and leftovers of the furniture factory are crushed with a wood grinder and beaten into sawdust which can be used to make biomass pellets, organic fertilizer, wood charcoal, compressed version, etc.! Choose Henan Zhuorui machinery and equipment! Specializing in the production of wood shredders, branch shredders, sawdust shredders, leftover shredders, etc.!

Classification: There are two categories of wood chippers: stationary and mobile. Stationary type is mostly used in factories; The mobile type is generally used in forest areas and mountain farms. According to the structure of the working parts, there are two types: drum chipper and disc chipper, and there are two types of inclined feed and flat feed according to the feeding method.

<> structure: It is mainly composed of machine base, feed port, cutter head, casing, chipping blade and electronic control, the machine can adjust the cutting blade according to the need to produce wood chips of different specifications and thicknesses.

Working principle: The wood is fed by the feed port, when the wood is in contact with the cutting blade, it is cut with the high-speed rotation of the cutting cutterhead, and the cut wood chips are sent out in the cutting chamber by the high-speed steam flow generated by the fan blades on the cutting cutterhead.

Summary. There are many places to cut wood, and generally speaking, you can go to the local garbage station, garbage treatment plant, garbage collection station and other places to go to the wood chipping. You can also go to the local wood processing factory, wood station and other places to cut wood.

In addition, you can also go to the local wood market, wood center and other places to cut wood. You can also go to the local wood company, wood dealer and other places to cut wood. Finally, you can also go to the local wood **** to find the place to cut the wood**.

There are many places to cut wood, and generally speaking, you can go to the local garbage station, garbage treatment plant, garbage collection station and other places to go to the wood chipping. You can also go to the local wood processing factory, wood station and other places to cut wood. In addition, you can also go to the local wood market, wood center and other places to cut wood.

Wood chipping back to the place where you know the receipt, you can also go to the local timber company, timber dealer and other places to go to the wood chipping. Finally, you can also go to the local wood **** to find the place where the wood is cut back to the fierce spike.

Can you elaborate on that a little bit more?

The place where the wood chips are cut is generally a garbage treatment plant or a station, and the wood chips can be put into the garbage sorting bin and processed by the garbage treatment plant. The reason for wood chipping is that wood chipping is a kind of material that can be reused, which can reduce pollution to the environment, reduce the waste of resources, and help save energy and protect the environment.

Workaround:1The wood chips are put into the garbage sorting bin and processed by the garbage treatment plant.

2.The wood chips are put into the **station**, and the **station is processed**. 3.

Put the wood chips into the collection box, and the collection box will be processed. Personal Tips:1

Try to reduce the production of jujube and wood chips to save resources and protect the environment. 2.Put the wood chips into the garbage sorting bin, and the garbage treatment plant will carry out ** treatment to reduce the pollution to the environment.

Wood chipping is a kind of material that can be reused, which can reduce pollution to the environment and waste resources, which is conducive to saving energy and protecting the environment.

1. Correct use of cutting tools:

For ordinary flat cutter disc chipper, all kinds of knives should be installed according to the provisions on the manual in principle. However, due to the difference in the hardness and softness of the wood chips in winter and summer, users can make appropriate adjustments according to practical experience. The gap between the flying knife and the bed knife should be.

The adjustment gap is adjusted by a screw device, and the nut moves axially by 4mm for each turn of the cutterhead, and when the nut is twisted clockwise, the size of the gap between the cutting blade and the bed cutter decreases. Conversely, the gap size increases. When the appropriate clearance size is determined, it should be locked with a lock nut so that it cannot rotate;

The helical cutter head chipper is different from the flat cutter head chipper mentioned above, its cutting mechanism is a rotating cutter head, which is equipped with a cutting knife (flying knife) sharpened into a helical surface, and the sharpening angle of the cutting knife along its length is variable, and this angle is one, so when using this chipper, the cutting knife must be finely sharpened. If the blades are sharpened at an angle along the length of the knife, the superiority of the spiral chipper is lost, resulting in a decrease in the quality of the chips and an increase in power consumption. The clearance value of the cutting knife, bed knife and side knife of the spiral cutter cutter should be one, which can be checked with a feeler gauge.

Because the feeler gauge can pass, it can't pass. When operating, if the sharpening angle is correct and the clearance value is guaranteed when changing the tool, high-quality wood chips can be obtained.

2. Master the cutting time and change the tool in time to make the cutting edge sharp

Due to the different quality of the blades, the different materials of summer, winter and the hardness of the raw materials, the continuous cutting time of the blades is also different. Under normal production conditions, the cutting cutter (flying cutter) should be changed after continuous cutting for 2-4 hours, and the bottom knife and side knife should be replaced once in 15-20 days;

When replacing the flying knife, bed knife and side knife, it must be carried out in the order specified in the mechanical manual;

3. The wood chipper should be evenly loaded with conveyor belt feeding, with the big head forward, the thickness matched, and the front and back connection.

Fourth, cutting and feeding, do not make the raw materials hit the cutter head strongly: the inclined feeding chipper should make the raw materials automatically slide along the chute. When the speed of the chipper decreases due to the cutting of coarser raw materials, the feeding should be temporarily stopped, and the feeding should be continued after the speed returns to normal.

Pay attention to the feeding, and do not let the iron or stones and other debris enter the feeding port.

5. When screening, the large pieces screened out need to be re-cut by the chipper, and the sieve slag should be removed; According to the requirements of papermaking woodchips, the rotary screen is generally 35*35mm for large mesh and 7*7mm for small mesh; The large mesh of the flat screen is generally 30x 40mm, and the small mesh is 5mm. For sulfate pulping, the length of qualified wood chips is 10-30mm, the thickness is not more than 5mm, and the pass rate is not less than 85-90%. The bark content is not more than 3%.

In the production, the sieved wood chips should be sampled and inspected on time, and when the quality requirements are not met, the machine must be stopped in time to be corrected.

1. Before the chipper is started, it is necessary to strictly check whether the installation of all parts of the machine meets the requirements, whether the screws and bolts are loose, and whether the belt can be gently pulled by hand to test the rotation, and whether there is any phenomenon such as touching the shell. At the same time, check the direction of rotation, it is strictly prohibited.

Crush flammable and explosive materials to avoid accidents.

2. In the production of the chipper, uniform blanking should be maintained to ensure the crushing quality and normal production, and at the same time, it is strictly forbidden to overload the motor to ensure the normal operation of the machine.

3. In addition to always paying attention to checking the loosening of the fastening of each part, we should also pay more attention to check the wear and tear of the wearing parts, and replace them in time if the wear is serious, so as not to damage the main components.

4 Due to the high speed, in addition to the correct and firm installation, good lubrication should be maintained at the same time to keep the normal operation of the machine. Under normal circumstances, it is normal for the bearing temperature not to exceed 70 degrees. Butter and molybdenum disulfide are added to the main engine bearing once a week, and the effect of high-speed butter is better.