Longines watches go slow, what to do?

The first thing to look at is whether it is a quartz watch or a mechanical watch to know what the problem is. Generally speaking, mechanical watches (including automatic mechanical watches) as long as they are in the case of full winding, the time is not more than 30 seconds a day, and the fast is not more than 30 seconds, and the quartz watch is in the case of sufficient battery power, the speed is not more than seconds, it meets the standard. It is possible that the Longines watch goes very slowly every day because of improper use by the consumer, and the user's lack of activity causes the automatic watch to be unwinding, causing the watch to slow down or stop.

People who are less active should not wear this type of watch. The watch is close to a magnetic field, such as a TV or mobile phone, which causes the watch to run inaccurately. The wearer itself has a strong magnetic field of the human body, which affects the timekeeping of the watch.

Precautions; Whether it is a mechanical watch or a quartz watch, as long as their error is within the range of the above two standards, we can say that the watch is qualified. Otherwise, it means that there is a problem with the watch and it must be taken to a professional watch repair center for adjustment.

If the Longines watch is slow, it is best to take it to the Longines repair center and ask the staff to check what is causing it. This will give you repairs.

Longines watches go slowly, you go to the watch repair shop, let him open the back cover for you to adjust the speed and slow adjustment words on the point, he has a test ceiling on the Bo, fast and slow fingers to see the frequency to know, it is accurate.

It's been a long time since the watch has been cleaned.

It is normal for a Longines mechanical watch to be one minute slower every day. It is larger than a quartz watch, but it is due to the quality of the production and the fact that the movement inside the watch is susceptible to the influence of gravity. Usually mechanical watches are calculated in seconds of daily error, while quartz watches are calculated in seconds of error in months.

Reasons why mechanical watches slow down:

1. The length of the hairspring that can be retracted and released will increase the swing amplitude, the swing frequency will be smaller, and the watch will be slower; Conversely, the more the pendulum frequency increases, the faster the watch will be.

2. The structural problem itself, due to the gravitational force of the earth, the offset between the horizontal position and the vertical position will produce a displacement, the mainspring will be tightened from the top to the relaxation, and the torque will be unbalanced, and it will be affected by the external temperature, magnetic field, vibration, etc.

3. The effect of the magnetic field, after the hairspring is magnetized, the circle between the rings is only shown when wearing, there is a sticky or short-term lap, especially in the façade, the hairspring will hang down due to its own gravity, and the shaking of the arm will intensify its radial movement, and the magnetic energy utility is shown because of this.

4. The balance of the balance wheel and the balance spring, especially the balance wheel, the balance wheel is very poor, which will cause the balance wheel to highlight the precision change of the surface under a certain swing.

How it works: The mainspring is the part that provides energy to the watch, which is wound inside the barrel. The mainspring is tightened by a milled groove on the shaft. The square groove of the bar shaft is driven by the upper bar mechanism.

The watch can travel for about 36 to 50 hours without a reload. The energy provided passes through the wheel group, which reduces the transmission force in the same proportion and increases the number of turns.

Abnormal.

If the watch has been worn for a long time may be the cause of the accumulation of dust, you can go to the watch store and ask the master to clean the movement, which may be more expensive, the speed of the mechanical watch is related to the daily wearing environment, such as temperature, winding strength, usual angle and so on. It is said that when not in use, the front side and the back side are not the same, so it is more particular.

If the time is not long, it may be a problem with the setting of the watch, there is a small needle that can be adjusted in the movement, go to the watch shop to adjust, before that, you only need to calibrate the time of the watch one day in advance, how long is it slow, tell the watch repairer to adjust it, a day fast or slow within 30 seconds is a national standard, not a quality problem.

Precautions for mechanical watch maintenance.

It should be noted that a full mainspring can usually keep the watch running for about 30 hours, and the longest can even be eight days or more. If you want the watch to run non-stop, you need to pay attention to the winding at all times, but overwinding the spring can cause damage to the watch, so it is usually recommended to only wind the spring once a day, and some people even recommend winding it at the same time every day, because the temperature at different times will affect the clockwork, so that the watch can be better maintained.

In order to ensure the good operation of the hand-wound movement and the accuracy of the watch, it is recommended to have a complete overhaul every 4 to 5 years, and to choose a designated service center. If the watch is of the complication type, it is recommended that you have it completely overhauled every 3 to 4 years.

The standard daily error of the mechanical watch is within plus or minus 30 seconds, and the slower minute per day has exceeded this range.

The disadvantage of a normal mechanical watch is that it will be a little slower every day, and the brand watch will be better, and the quartz watch will not have such an error.

Abnormal, even if the error of the mechanical watch is too large, and it is a little famous for Longines, the normal mechanical watch day error is stipulated within plus or minus 30 seconds, you have a bit of an error, it may be too long without maintenance, or there are other problems, it is recommended to send it back to the merchant after-sales inspection and maintenance.

It is not normal for a Longines mechanical watch to be one minute slower per day, it should be within 15-30 seconds.

The high imitation watch is only 30 seconds every day...

Abnormal, out of the margin of error.

Hello, there are many reasons why the watch can slow down, such as lack of power, lack of regular time maintenance, damage to internal parts caused by impact, etc. To avoid this situation, we should set an example in our daily life, do a good job of magnetic prevention, stay away from computers, magnetic fields, TVs and other electronic products, and do a good job of after-sales maintenance for a long time. You can also find the after-sales service center, or click on the homepage to consult.

We will not only solve the problem of slowing down for you, but also explain to you in detail the daily professional prevention and maintenance methods. Welcome to consult.

The watch is not allowed to run inaccurately:

1.Watch magnetization: The watch is in too much contact with items with magnetic fields, which leads to the phenomenon of magnetization of the watch, causing the watch to be inaccurate.

After being magnetized, the watch may stop, slow, or fast. After the watch is magnetized, its magnetism will not recede on its own, and it needs to be demagnetized and repaired to return to normal.

2.Lack of maintenance: If the watch lacks maintenance, it will lead to wear and tear of parts, dry up the sludge, affect the normal running time of the watch, and make the watch appear fast and slow.

3.Mechanical failures: Mechanical failures such as watch balance spring failures, escapement failures, and component slips can cause the watch to be fast and slow.

Mechanical watches are sometimes fast and sometimes slow, and it may be caused by severe impacts, water ingress, etc. Quartz watches are generally very accurate and less prone to time failures. In the case of adequate maintenance, it is more likely to be fast and slow, which is more related to the failure of the circuit board, or the poor contact of a certain part.

1. Longines watch goes fast: There are only two reasons why Longines watch goes fast, one is caused by the watch being magnetized, and the other is caused by the watch being vibrated to make the hairspring stick.

2. The watch is magnetized as long as it is demagnetized at the watch store. In daily life, Longines watches should be kept away from televisions, refrigerators, speakers and other electrical appliances with strong magnetic fields, otherwise it is easy to magnetize Longines watches if they are in the magnetic field for a long time.

3. If it is a problem with the watch movement, it needs to be repaired by professional after-sales, because the cover needs to be opened to open the hairspring, so it needs to be repaired with sufficient professional level. Although the current Longines watch has a certain shockproof function, it cannot prevent strong ** or bumps, so you should be extra careful during wearing.

Hello dear I am happy to answer the answer for you: Why is Longines mechanical watch always two minutes slow down for a few days? Kiss for you to find out that the amount of activity is insufficient, resulting in the automatic watch winding is not satisfied, causing the watch to slow down or stop.

It is possible that the Longines watch walks very slowly every day because of improper use by the user, and the user's lack of activity causes the automatic watch to be unwinded, causing the watch to slow down or stop. People who are less active should not wear this type of watch. The watch is close to a magnetic field, such as a TV or mobile phone, which causes the watch to run inaccurately.

Whether it is a mechanical watch or a quartz watch, as long as their error is within the range of the above two standards, we can say that the watch is qualified. If you find that the error of your Longines watch exceeds the error standard, you need to go to a professional watch repair service center for repair as soon as possible.

Summary. Dear, the reason and solution for the slow running time of the Longines watch: The slowing down of the Longines watch may be the slower and slower walking caused by the battery of the Longines watch.

Solution: The service point is replaced after the sale, if the fruit is a new Longines watch that has been bought for less than a year, it may have been in contact with some magnetic objects. Therefore, it is recommended that you avoid contact with magnetic objects as much as possible.

The treatment of Longines watch magnetization is very simple, you can take it to the customer service center or the watch repair master, without opening the cover, directly use the demagnetizer (or called the degaussing machine, the must of the watch repairer, the market price is only a few hundred yuan) for demagnetization, 2 seconds can make the Longines watch return to normal.

Longines watches go slow, what to do?

Dear, the reason and solution for the slow running time of the Longines watch: The slowing down of the Longines watch may be the slower and slower walking caused by the battery of the Longines watch. Workaround:

After the sale of the service point replaced, such as the fruit is a new Longines watch that is less than a year old, it may have been in contact with some magnetic objects. Therefore, it is recommended that you avoid contact with magnetic objects as much as possible. The treatment of Longines watch magnetization is very simple, you can take it to the customer service center or the watch repair master, without opening the cover, directly use the demagnetizer (or called the degaussing machine, the must of the watch repairer, the market price is only a few hundred yuan) for demagnetization, 2 seconds can make the Longines watch return to normal.

The length of the strap is adjusted slightly, and the position of the movable pin is slightly adjusted, and the strap shaft needs to be removed and assembled for a large adjustment. Precautions for the use of Longines automatic mechanical watches: Do not open the back cover for non-professionals to prevent damage.

I hope you find the above information helpful and wish you all the best, good health and all the best.

If the watch is running slowly, check to see if the watch is running slowly due to insufficient power or mechanical failure. Because the power of the watch is not enough, we need to wind the watch, if the mechanical watch fails, we must let a professional maintenance personnel repair it, and we cannot disassemble the watch ourselves. Since we inadvertently cause the watch to collide or fall to the ground, the watch will slow down.

At this time, it is necessary to send professional maintenance personnel to inspect and repair.