Xiaomi Mi 3 notification bar can t be pulled down, how to turn on Xiaomi Mi 3 to show notification b

Generally, it is caused by system problems, and it is recommended to deal with it three times, which can be operated according to the following steps:

It's best to open the backup software that comes with your phone to back it up before clearing it to facilitate recovery.

Sanqing is to format the phone, which can solve most of the system problems, software flashbacks and other abnormalities, and Sanqing is also used to update the system before.

Clear the system data to ensure that the flashing can be carried out normally.

The method of entering the REC mode and clearing the three clears.

1) Open the system update software on your phone, click the menu button, and select Enter REC mode.

2) In the shutdown state (self-buckle battery, Mi 3 long press the power button for ten seconds to force shutdown), press the power button and the volume plus key together, later light up the screen and let go, and then enter a page, Chinese Simplified.

english

3) The power button is the OK key, the volume up and down keys are selected, there are three options in the page, press the power button to OK, select Chinese Simplified.

4) Select Clear Data.

5) Select Clear Cache, and when the clearing is complete, select Clear Data again.

6) Select Clear User Data, and when the clearing is complete, select Clear Data again.

7) Select Erase All Data, and when the clearing is complete, select Restart your phone.

8) Select Enter the system with Recent.

9) After the phone is turned on, find it, back it up, turn it on, and restore all the data.

If the fault is not solved after the three clearances, it is recommended to go to the after-sales service.

Hi! Please try it out according to the following two points:

1.Please back up your data first (by turning on System and Security Backup to create a new backup. Then, enter recovery (power off, press and hold the volume on + power button to enter recovery) mode, clear cache, clear user data, clear all data, restore backup, settings and third-party security software in the phone do not recover.

Try if it works properly.

b.During this time, please back up your data, enter recovery (power off, press and hold the volume up + power button to enter recovery) to clear the cache, clear user data, clear all data,. The computer is equipped with a driver,** Miflash flash tool,This is the link to install the driver:

Mi-1 1S series.

Mi-2 series.

c.When everything is ready, please follow the flashing tutorial on the official website to use the sixth line brush, which is the official flashing tutorial:

Method: 1. Click [Settings] on your Xiaomi phone to enter the settings interface;

2. Click [Notifications and Status Bar] on the settings page to open the Notifications and Status Bar interface;

3. Click [Notification Management] on the notification and status bar interface to open the notification management interface; It's all open;

5. In the following example, [Show in Notification Bar] is enabled by default, you can turn it off, and the message push in the notification bar will not be displayed after it is closed, if you want to turn it on, you can just reverse the operation.

Hi! Hello. System Settings - Notification Bar Settings - Custom Notifications.

Hello, Glad to help you, Here's how to turn on the display notification bar by clicking on the menu key.

Click System Settings.

Click Set all.

Click Notification bar settings.

Click Customize notifications.

Click on the software you need.

Then turn on Show Status Bar Notifications.

It is recommended that you follow the following methods:

1.Whether you have installed Mobile Security Guard software or some third-party software programs on your phone, if so, please try to uninstall it.

2.It is recommended that you restore the machine to factory settings, and the operation is as follows: Settings-Reset-Factory Reset (but since this machine will lose all the data in the phone if it is restored to factory settings, it is recommended that you back up important data such as **Ben,**,**, etc.) in advance).

3.It is recommended that you try a firmware upgrade. (Settings - About Device - System Update).

Mi San is an all-in-one machine, the battery is not removable, the main screen is 5 inches, MIUI V5 (an operating system based on Android OS, the notification bar can't be pulled down for the following reasons:

1 Whether there is an SD card on the phone, take out the SD card, turn it off and restart it to try if it is OK.

2 If there is a problem with the mobile phone software, back up the data on the mobile phone, and then restore the factory settings.

3 ** There is a conflict between the third-party software and the system, in the shutdown state, press and hold the volume plus key and the shutdown key, and let go when the boot screen appears, you can enter recovery. Go to Recovery >Clear Chinese > Clear Data > Clear All Data).

If you still don't answer the spring socks, it is recommended to bring the relevant documents and invoices to the network engineer for inspection and maintenance.

Please use the following method:

1. Clean up system junk and temporary files, and restart your phone.

2. Restore factory settings.

It is recommended that after using the phone for a period of time, back up the data and data of the phone and restore it to factory settings.

This is the same as reinstalling the system on the computer, after the factory reset, the system is stable and fast.

Please use 360 Cloud Drive to back up your data.

1. The notification bar is just a component crash, just restart it.

3. If the mobile phone uses a third-party theme, you can try a different theme, or change back to the default theme of the system.

Fourth, if there is a problem with the system of the mobile phone, you can restart the mobile phone to try, and if necessary, you can reset the system or upgrade the system to solve it.