What should I do if the garment steamer in Bellade does not steam out?

Recently, many netizens have consulted me: "I bought a Bellade garment steamer, this thing is a bit like high-tech, not very good at using it, I use it to iron clothes is not good-looking, not neat, may I ask the blogger how to use your Bellade garment steamer." "For this kind of question, there are a lot of people asking these days, I am sometimes busy at work, please forgive me for the slowness, today I will summarize the use of it, I hope it will be useful to you.

How to use the garment steamer in Bellede.

The first step is to smooth the surface of the garment, how to do it, you can grab the lower part of the garment with your hand and pull it down.

The second step, the use of high-temperature steam to soften the fiber and then through the tension to shape, the specific method, the garment steamer has a steam nozzle, that is, use it close to the clothes, gently press down, and then drag the nozzle up and down, back and forth.

The third step, the bottom of the clothes need some skills, grab the two sides of the clothes, pull the left and right up and down pressing, the steam of the nozzle is very hot, be careful, many bloggers have been burned by the steam of this nozzle.

Fourth, ironing the collar is also a bit skillful, at this time to press down a little, the steam nozzle pressed on the collar fold for a longer time, up and down the cycle of pressing on it.

Blogger warm reminder: When you buy a Belled garment steamer, there is usually a manual, and the manual says how to use the Belled garment steamer, as for why so many netizens asked me how to use the Belled garment steamer, is the garment steamer easy to use, and other questions, I don't know, maybe the manual was lost, or the Belston garment steamer merchant didn't give them the manual at all.

The garment steamer does not produce steam, how about the Belled steam mop.

Originally to 5 hearts, but the courier you sent was too bad, I don't know how to say the courier, I used to take it and said that it was in the car of God Express, and after 3 days, I called ** and asked me to get it, you must know that I want 20 fast money in the city. Stuff ok.

Thank you for your praise, your satisfaction is the greatest affirmation of Belled, Belled will continue to work hard, continue to provide pro with first-class service and first-class quality of goods ** is to the extreme! I believe that you will use it more and more like it, please be sure to recommend it to your friends and colleagues when you are satisfied with it When the machine is working, there will be a little sound, which is a normal situation. The reason is that Belride uses a high-efficiency heating element with a faster heating speed, so Bellaide products are shorter than the general garment steamer steam time (within 45 seconds), because Belride is a high-efficiency heating element, the thermal capacity conversion rate is high, due to the large amount of steam generated by the thermal capacity conversion, the heating element will produce pressure in the body when working, when the steam with a certain pressure rushes outward faster, it encounters the reflux condensate at the nozzle panel, and the collision is generated"Pounce"I hope that Belled's answer can help you!

Belled will continue to provide pro with first-class service and first-class product quality! Happy use!

Summary. If the indicator light of the garment steamer flashes and flashes, it may be: 1

The water inlet of the garment steamer is blocked, disconnect the power supply, and deal with the water inlet. 2.The vent of the steam duct or nozzle is blocked, and the vent of the steam duct or nozzle can be cleaned up.

Hello dear, the main reasons are the following three potato faces: 1. The thermostat of the heating pot in the garment steamer is broken, and the thermostat needs to be replaced. 2. If there is no electricity, that is, the fuse of the garment steamer is burned, and the fuse is replaced.

3. It may be that there is too much scale blocking the steam outlet, and it is necessary to clean the internal water tank of the garment steamer with a mixture of water and vinegar.

If the indicator light of the garment steamer flashes and flashes, it may be quiet: 1The water inlet of the garment steamer is blocked, disconnect the power supply, and deal with the water inlet.

2.The steam outlet hole of the steam duct or nozzle is blocked, and you can clean the air outlet of the steam duct or the bump. Bureau of guerrilla.

How is the garment steamer used in Belled? Do you know what a garment steamer is? Garment steamer is a relatively common machine used for ironing clothes, this kind of machine can directly iron clothes, so how to use the garment steamer in Bellaide?

The method of using the garment steamer is very simple, and almost all novices can get started at one time. The following will introduce to you the use and operation method of the garment steamer in Belled, and we will understand how to use and maintain the branch hall.

First, the operation method

Use. 1. When ironing pants, hang on an ordinary hanger for ironing, and it is best to wear anti-scald gloves.

2. When ironing the hem of the clothes, grasp the sides of the clothes, tighten them for pressing, and be wary of the hot steam of the steam nozzle. (A more convenient way is to iron with a plywood.) I'm not afraid of hot hands and it's good to iron my clothes).

3. When ironing the collar, it is generally easier to turn the collar over and iron it from the back.

4. When it is hot on the sleeves of the clothes, the sleeves should be straightened a little harder, and the steam nozzle should be pressed on the sleeves for a longer time, and the sleeves should be pressed back and forth.

Tips for use:

The first is to try not to lack water, although there are protective measures such as temperature control inside, but still pay attention.

The second is maintenance, after using it for a period of time, feel that the gas volume is small, mix it with white vinegar and water 1 1, pour it into the water inlet, shake it repeatedly, open the descaling valve at the bottom of the machine, let it go, and then rinse it with water several times until there is basically no taste of vinegar. The third is the skill of ironing clothes, thick clothes use high power, silk and other light clothes use small power, close to the point, slower speed. In addition, when ironing pants, you can use a spray clip, if not, you can put the pants on a flat surface, and use a smooth metal nozzle instead of a flat iron to achieve a flat iron.

After use, apply a professional dust cover to avoid falling into the soil and prevent the colored parts of the outer plastic from fading or yellowing.

Second, maintenance methods

Remove limescale. 1. Add about 10 grams of citric acid or drop some rice vinegar to the bucket, and add water according to the ratio of 2 to 3.

2. After turning on the power, spray steam and wait for the mixture of citric acid and water to reduce to half.

3. Turn off the power and after 10 minutes, completely drain the mixture of citric acid and water in the bucket.

4. Please repeat the above process 2 3 times, and only fill it with water for steam injection for the last time. At this point, the lime precipitation has been completely removed.

Hello, the specific steps to disassemble the Bellade garment steamer may vary depending on the model and design, so it is recommended that you consult the product manual and follow the relevant guidance before making any repairs or disassembly. Generally speaking, you can follow these steps:1

Power disconnection: Be sure to unplug the garment steamer first to avoid any electric shock or safety accidents. 2.

Remove the tank: Remove the tank and drain all the water inside. 3.

Remove the nozzle: Remove the nozzle from the garment steamer. Some models require the disassembly of other components to access the printhead.

4.Remove the steam pipes: Depending on the need, you may need to remove the steam pipes or other parts on the garment steamer for better access to the internal components.

5.Remove the shell: Use a screwdriver or other appropriate tools to remove the shell of the garment steamer.

Sometimes it is necessary to remove multiple screws or other fixtures. 6.Check the components:

Once the garment steamer's casing is opened, you can inspect its internal components such as heating elements, water pumps, sensors, etc. 7.Repair or Replacement:

Depending on the need, you can repair or replace any damaged or failed components. 8.Assemble:

After repairing or replacing the components, reassemble the garment steamer and make sure all parts are installed correctly and the power plug is plugged in. Please note that disassembling the garment steamer may void the warranty, so it is recommended to follow the repair recommendations in the product manual or contact the manufacturer's authorized masking repair center during the warranty period.

We will not only encounter a lot of problems in the selection of materials when decorating, but also encounter many problems in the selection of household products "garment steamer", and as a bell steamer that has always been loved by consumers, there will inevitably be some problems in the use process, such as no steam. So what should I do if the garment steamer in Belle does not produce steam? Next, I will take you to understand what solutions there are.

First, the steam hose is bent.

There are many reasons why the garment steamer does not produce steam, first of all, it may be that the steam hose is bent, and it is good to keep the steam pipe smooth when using the garment steamer, and the steam pipe can not be bent, otherwise the steam will not come out, and the garment steamer will also make a gurgling sound.

Solution: Straighten the steam pipe of the garment steamer, and pay attention to whether the steam pipe of the garment steamer is wrapped with steel wire springs when buying the garment steamer, and the steam pipe wrapped with steel wire springs will not cause the garment steamer to produce steam even if it is bent.

2. Do not clean for long-term use.

If the garment steamer is not cleaned after long-term use, it will lead to clogged filter screen or clogged steam holes. When the filter is blocked, there will be a sound of heating but no boiling water in the main engine, and when the steam pipe is blocked, there will be a sound of boiling water in the main engine but no steam ejection.

Solution: Regularly clean and maintain the filter screen and steam pipe pores of the garment steamer.

3. The storage tank was not put into the water tank.

The garment steamer in Belle has a storage tank, and we have not lost time when we place the water tank, so that the water can not flow into the tank, and the garment steamer naturally cannot produce steam.

Solution: Wear and tear.

Take out the garment steamer's water tank, re-place the storage slot, and place the storage slot again.

Fourth, there is the sound of boiling water in the machine, but there is no steam spraying out of the steam nozzle.

In the case that there is a sound of boiling water in the main engine of the garment steamer, but there is no steam ejection from the steam nozzle, it may be that the conduit of the garment steamer is blocked, the steam conduit is blocked, and the high-temperature steam cannot be output through the conduit, and of course the garment steamer will not produce steam.

Solution: When such a problem occurs, you need to close the garment steamer quickly, and clean and dredge the steam duct of the garment steamer and the air outlet hole of the ironing panel.

The above is the relevant content about what to do if the garment steamer does not steam out of Belled, I hope it can help you! , a well-known large-scale decoration platform in China, a leading brand in decoration. If you want to put a lot of thought into decoration design, it is recommended that you apply for the * design service, through the on-site measurement of professional designers to help you plan a reasonable space layout and exquisite design.