What should I do if the drawstring inside the clothes goes in

If the drawstring of the clothes goes in, you can try the following methods to solve it:

1.Use a sewing machine: If you have a sewing machine at home, you can sew one end of the drawstring into the hole and pull it out through the sewing machine.

2.Use a long needle or thread: If you have a needle or thread at home, thread one end of the needle or thread into the hole and pull it out through the needle or thread.

3.Use hooks or clips: If you have a hook or clip at home, stick one end of the hook or clip into the hole and pull it out through the hook or clip.

4.Use magnets or magnets: If you have magnets or magnets at home, you can place them in a hole and magnetically suck them out.

5.Disassemble the garment: If none of the above methods work, you can finally unwrap the garment and take out the drawstring and sew it back on.

What should I do if the drawstring inside my clothes goes in? Step 1: You first touch with your hands to judge the position of the rope head in**, the second step:

Once you have determined the position of the end of the rope, slowly squeeze the end of the rope out with your hands until you see the end of the rope, and then clip it out with a clamp. Step 3: After the rope end is out, remember to tie a larger knot to prevent it from going in again next time.

You can find a straw for the drawstring of the clothes, put the rope into the straw, thread the straw into the clothes, and finally pull the straw out to close the mu. After the rope is put into the straw, it is easy to run around in the process of stuffing it into the clothes, and you can use a stapler to staple the straw so that the rope of the clothes will not run around, which is a very practical method. After the rope of the clothing is threaded in, remember to tie a knot in the rope, if it is not knotted, then the rope will still run out.

If you don't have a straw in your shirt, you can also use the refill of a gel pen and insert the tip of the pen into one end of the string, pinch the pen and the rope at the same time, and tuck it into the hole in the edge of the garment. After stuffing it in, you should pinch the front of the pen and the rope and slowly push it into the clothes, pay attention to the fact that once you have stuffed it in, you can't turn back, otherwise the tip of the pen will fall off from the rope, and in addition, the action must be gentle so as not to cut the clothes. Once you've stuffed it all in, pull the pen and rope out of the other end and you're done.

Once the rope inside the clothes is pulled out, it is difficult to stuff it back in, so you can usually tie a bow or tie a dead knot to avoid the sedan chair from running out of the clothes.

1. Paper clip: After the paper clip is opened, hook the trouser rope with the pointed end, and then press and seal the paper clip, slowly lead to the other end through the entrance of the trouser rope, and the general shape of the paper clip can be touched from the outside of the fabric, and you can slowly use both hands to pull the paper clip to the other end.

2. Straw: You can tie one end of the trouser rope and one end of the straw together, so that after slowly putting the straw into the entrance of the trouser rope, slowly rub the straw from the inside of the fabric roller to the other end, so that the trouser rope will be brought to the other end by the straw, and the knot on the straw and the trouser rope can be used normally.

3. Needle and thread: The needle and thread can also be strung back with the trouser rope, but the needle and thread are more dangerous, so it is recommended to be cautious when using it, connect the needle and thread to the trouser rope, and then use the needle and thread to slowly penetrate the entrance of the trouser rope to the other end, at this time, you can pull out the trouser rope directly by pulling out the needle and thread, and then cut the connected rope.

When the trouser cord is pulled out, you can use the paper clip, hook the trouser cord with the paper clip, and use both hands to push the paper clip to the other end of the trouser cord entrance; Tie the trouser cord and straw together and let the straw pass through the inlet of the trouser cord; Connect the trouser cord with a needle and thread, thread the needle and thread through the trouser cord inlet and untie it.

After opening the paper clip, hook the trouser cord with the pointed end, press the paper clip to close it, and slowly lead to the other end through the entrance of the trouser cord. You can feel the general shape of the paper clip inside from the outside fabric, and you can slowly push the paper clip to the other end with both strong hands, and after a while, the paper clip will come out of the other end with the trouser rope.

You can tie one end of the trouser cord and one end of the straw together, so that after slowly putting the straw into the entrance of the trouser rope, slowly rub the straw from the fabric to the other end, so that the trouser rope will be brought to the other end by the straw, and the knot on the straw and the trouser rope can be used normally.

It is also possible to string the trouser rope back with needle and thread, but it is more dangerous to use needle and thread, so it is recommended to be cautious when using it. Connect the needle and thread to the trouser rope, and then use the needle and thread to slowly thread the entrance of the trouser rope to the end of another filial piety, at this time, you can pull out the trouser rope by pulling out the needle and thread, and then cut the connected rope.

What should I do if the trouser cord is pulled out? If the drawstring of the pants is accidentally pulled out, it is sometimes really troublesome to put it back on, but it is not difficult to wear it back, so let me take you to find out. Respectfully.

1. Paper clip: After opening the paper clip, hook the trouser rope with the pointed end, and then press and seal the paper clip, slowly lead to the other end through the entrance of the trouser rope, and the general shape of the base pin can be touched from the outside of the fabric, and you can slowly use both hands to push the paper clip to the other end, and the paper clip will come out from the other end with the trouser rope after a while.

2. Straw: You can tie one end of the trouser cord and one end of the straw together, so that after slowly putting the straw into the entrance of the trouser rope, slowly rub the straw from the fabric to the other end, so that the trouser rope will be brought to the other end by the straw, and the knot on the straw and the trouser rope can be used normally.

3. Needle and thread: The needle and thread can also be strung back with the trouser rope, but the needle and thread are more dangerous, so it is recommended to be cautious when using it, connect the needle and thread to the trouser rope, and then use the needle and thread to slowly penetrate the entrance of the trouser rope to the other end, at this time, you can pull out the trouser rope directly by pulling out the needle and thread, and then cut the connected rope.

If the drawstring of the pants is off, you can buckle one end of the drawstring with a distinguishing needle, and then thread the paper clip into the rope hole and gradually thread it out through the other rope hole. In addition, you can also bend the wire into a hook at one end, and then tie the rope to it, and then thread the wire through the rope hole in the waist of the pants and out through the other rope hole.

If the drawstring of the pants is off, you can use the paper clip to get it in, fasten the paper clip to one end of the drawstring, and then thread the paper clip into the rope hole, and then slowly pump it out from the other rope hole.

In addition, you can also use a wire to get the rope that falls out of the pants, make one end of the wire into a hook, and then tie the rope to it, and then thread the wire through a rope hole in the waist of the pants and out through the other rope hole.

After the straw is connected to the drawstring of the pants, the straw is threaded through the rope hole at one end of the waist of the pants and gradually moved to the other rope hole, and finally the straw is pulled out of the other rope hole, and the drawstring is re-inserted into the pants.

Prepare the material: Pipette.

1. Insert one end of the drawstring into the straw.

2. Slip the straw inserted into the drawstring into the pants.

3. Use the straw to completely thread the drawstring into the pants and slowly move the straw until it is worn out of the other end.

4. Pull out the straw that is worn out, and the drawstring has been put on at this time. Straighten the drawstring a little.

This method is very simple and effective.

Prepare the material: Pipette.

1. Insert one end of the drawstring into the straw first.

2. Thread a section of straw inserted into the drawstring into the pants.

3. Use the straw to completely thread the drawstring into the pants, and slowly move the straw until it comes out from the other end.

4. Pull out the straw that is worn out, and the drawstring has been put on at this time. Straighten the drawstring a little.

This method is very simple and effective.

There are many ways to get a drawstring into your pants:

1. Connect the rope with a needle and thread, thread the needle and thread into the entrance of the pants seam, and then move the needle and thread inch by inch, leading the drawstring to the other end, until the other end is pulled out, and the drawstring can be pulled into the pants.

2. Connect the drawstring with a bamboo skewer, thread the rope into the entrance of the trouser seam until the other end of the rope can be pulled out 3, connect the drawstring with a paper clip, pass through the entrance of the trouser seam until the other end can be pulled out 4, clamp the drawstring with a hairpin section, and then pass through the entrance of the trouser seam little by little until the other end is pulled out.

5. Use a lighter to bake one end of the drawstring until soft, then press it solidly, and pass through the entrance of the trouser seam until the other end is pulled out.

1. Use hairpins (or large needles).

2. Clamp the drawstring in the hairpin.

3. Wear it into the seam of the trousers.

4. Because the hairpin is small, you can pinch the hairpin with your hand through the trouser surface and move it forward inch by inch.

5. Pull out the outlet.

6. Set the drawstring.

You can use a pin to attach the drawstring to the pin and push the pin forward in the seam of the rope with your hand.

Take a thin black women's hairclip, tie it in the middle of the rope, and then use the hairpin strap rope from one end to the other and wear it through the pants. Remember that the rope at both ends must be tied in a small knot.

Thread a thread with a needle, sew it on the drawstring, then drill the tail into the hole in the pants, slowly drill forward, and remove the thread when it comes out.

Tie the drawstring to the round hole at the bottom, insert one of the holes and slowly push it forward, squeeze it through the fabric, and slowly pass it through.

Fix one end of the rope with the branches of the fake flowers, go through one of the holes, and shrink the end of the pants towards the side with the piercing, until the other hole is pierced. If you don't have branches, you can sacrifice a hanger to make a straight strip?