Do you have any good advice for timber roofs that want to be insulated?

First of all, you need to prepare some prefabricated cement sheets, and lay brick piers on the roof according to the size of the prefabricated slabs to facilitate the erection of the prefabricated slabs. At this time, the prefabricated slab is equivalent to the roof, and the original roof is equivalent to the floor slab of the next floor. The air between the brick piers passes through both sides to prevent the top floor slab from being directly exposed to sunlight and causing the ceiling temperature of the residents to be too high, resulting in the indoor temperature not being able to drop, there is a problem here, that is, when laying the insulation layer, do not try to choose a good one with quality assurance in order to save money.

The building was turned into a video room. When doing it, I sacrificed a part of the floor height, and added a layer of insulation cotton at the top, because it is a video room, which has a sound-absorbing effect, because the house is the same area up and down, and I sealed two of the three terraces with the sun room, the main reason is that it has a large number of closed pores, so it has the advantages of lightweight, waterproof, heat preservation, heat insulation, fire resistance, frost resistance, sound insulation, etc., and energy saving and environmental protection, no pollution, no radioactivity and toxic and harmful substances, strong durability, as the top floor insulation I think should be the best way.

Insulation on the roof should be the most common method. This is based on the principle of air circulation, so that when sunlight hits the insulation, the high temperature will flow away with the air from the roof floor and insulation, so that the house can be too hot. But the laying of public ** can be used together, with good materials, and built as a whole.

Some multi-storey top plus pavilion, the attic is the kind of red tile spire, the transformation is more troublesome, that belongs to the old house, the attic floor is not high will be hot, rain leakage directly replace the red tile.

The best way to insulate the top floor is to make a roof insulation layer, which can be extruded plastic board or foam polystyrene board, with a thickness of about 5-10 cm. It is better to do it on the roof, and then make a layer of thermal insulation bricks on top of it. The thickness of the insulation can be based on the local thermal insulation, and a sunscreen can also be built on the roof, which can remove the sun off part of the hair, and people can also rest and enjoy the shade below.

I don't quite understand this and have no advice. You can make a roof, a layer of insulation, if it is a glass roof, you need to cover the film, it is best to ask the decoration master.

The roof can be added with other insulation materials, or in other ways to insulate, or you can choose to add some other materials on the wooden structure roof, the effect is very good, and it will also play a very good insulation effect, which can bring us great convenience, so we can choose this way.

I think that when decorating a wooden roof, you can add thermal insulation and waterproof layers on the roof, or you can buy some special insulation materials for laying, and then cover some boards, and finally cover with cement, so that you can do a good job of heat insulation and rain insulation.

You can make a glass roof on the wooden roof and mix and match, which solves the problem of lighting and insulation, and it is not particularly hot.

My suggestion is to apply waterproof material to the roof and then apply a protective layer that can cool down the heat.

In fact, we can buy some heat insulation boards and put them on the roof, and at the same time we should do some waterproofing, so that it will be a good solution, and it can be very easy and easy, and the cost is relatively low.

Use an inverted buckle to fix a layer of our fireproof thermal insulation board, and then make a layer of decorative surface.

The five-storey roof insulation layer, lawn, ceramsite insulation, honeycomb mat, and rubber mat all play a role in preventing roof leakage, and the dew and rainwater stored on the lawn also play a role in indoor cooling. In this way: not only the roof terrace is beautified, but also the green from a distance, and the method of adding insulation layer and suspended ceiling on the roof can only delay the rate of indoor heating after exposure to the sun.

In summer, from morning to night, the insulation layer actually becomes a heat storage layer, and the accumulated heat will still be released into the room. The same is true for suspended ceilings, where the heat isolated from the ceiling will still be dissipated into the room.

Whether it is a sunny house or a normal form of housing, when decorating, it is easier to add a few more windows. For example, open the skylight on the ceiling, add a few floor-to-ceiling windows around the sky, and when it is hot, it is a good way to open the windows for ventilation. The third is to plant rattan plants on the roof.

Like grapes, beans, loofahs, ** boxes and poles of plants for sale, the disadvantage is to have time management, and finally the shade net ** is about 8 yuan a catty. The disadvantage is that I am afraid of strong winds, and I can't use it for three yearsLaying insulation boards:

Directly on the roof of the floor slab to lay thermal insulation board, ordinary foam board, better with extruded plastic board, thickness of about 4-8 cm according to the local weather conditions to choose the appropriate insulation board, insulation board thickness thick, high density, good insulation effect. In order to avoid the stilt insulation bricks affecting the appearance of the roof and the activities of the crowd, and avoid the construction cost of the awning and affecting the lighting, you can lay a layer of insulation materials on the roof, and you can also use the principle of air insulation. This method is generally to use foam material to insulate the heat, <>

Based on my own experience in rural housing construction and the architectural knowledge I know, I consider the following, if the roof is a flat roof, the most popular and simple method is to paint the roof several times with thermal insulation and waterproof paint after the flat roof is slopedThere is also a simpler one, that is, directly with a shade net on the roof of the bungalow, such an effect can also be used. It's just that this one needs to be bought, and the straw curtains in our hometown can be made by ourselves.

To increase thermal insulation materials, it is necessary to choose good thermal insulation effect, glass wool rock wool effect is general, phenolic foam, polyurethane foam board can be selected, and the thermal conductivity is relatively low.

We can lay insulation on the roof of the building, the sunlight shines directly on the insulation, the rising temperature can be carried away by the air between the roof and the insulation, and we can also build an awning, or green insulation, you can plant some vegetables and fruits in the home to insulation.

Apply an insulating layer to the top of the house and then apply tin foil to prevent overheating and burning.

You can put a layer of insulation on the roof to not only insulate the heat, but also to prevent water. The overall effect is very good.

A layer of thermal insulation film should be added when decorating, so that it can have a thermal insulation effect, and the effect is also obvious.

Insulation should be laid, and there are a lot of good insulation materials on the market that can make the house cool.

If you want to insulate a wooden roof, you can add a few more windows when decorating, which is a relatively easy method. For example, opening a skylight on the ceiling, adding a few floor-to-ceiling windows around it, and often opening the windows to blow wind when the weather is hot is a good cooling method. The second is to plant vines on the roof.

Just like grapes, soybeans, and loofahs, they can be decorated with boxes or shelves.

First of all, you can use a shade net to lay on the roof of the bungalow. This effect is also good. You can also use the way of laying insulation board, the roof ground is directly paved with insulation board, ordinary foam board, a better extruded board, the thickness is about 4 8 cm, according to the local weather conditions to choose the appropriate insulation board, the thickness of the insulation board is thick, the density is high, and the insulation effect is good.

In order to avoid the stilt insulation bricks affecting the appearance of the roof and crowd activities, and not affecting the construction cost and lighting of the awning, you can lay an insulation layer on the roof, or you can have both thermal insulation and waterproofing, and use the principle of air insulation. This method is generally to use foam to keep out the heat.

Flexibility in the interior layout and decoration of timber rooms. Not only does the cottage offer a variety of exterior architectural styles, but it also offers considerable freedom in interior layout and decoration, allowing the designer's imagination to be unleashed and the individual needs of the consumer are met. In addition, the construction period of the cottage is about 1 2 of the traditional house, the construction period of the traditional house is 6 10 months, and the construction period of the wooden house is 3 4 months, which greatly shortens the capital ** time for the developer and reduces the operating cost.

When the traditional house is completed, it is just a rough house, and the structural decoration of the wooden house is basically completed, and you can move in as long as there are personalized highlights. Moreover, the wood used in wooden houses is a very stable, long-lasting and durable material.

To sum up, wood is a very good electrical insulator, with low conductivity, wooden houses use the principle of sandwich insulation and air barriers, wooden houses have good thermal insulation performance, low energy consumption, and can greatly reduce the energy cost of consumers.

For customers who live on the top floor, when it comes to the hot summer, the room will be very hot, so many people want to do thermal insulation on the roof, but there are also many people who do not know how to insulate the roof, so the author will introduce in detail how to insulate the roof of the building, and strongly recommend some thermal insulation methods to everyone, let's take a look!

Pavement insulation layer is a more common insulation method, this kind of method can reasonably block the direct sunlight, and the common raw materials of the insulation layer are thermal insulation bricks. Applying insulation paint or tin foil, the raw material of gloss-back, is actually the easiest way to apply the insulation layer, and the price is not high.

In addition to the roof insulation, we can also build a sunshade net or an awning on the roof, and the awning can be built on the roof theme activities, but the price of this kind of method is very high, if the construction is not scientific, it will continue to endanger the lighting problem, and there are some areas that can not build awnings at will, so the sunshade net can be applied, the price of the sunshade net is not high, and the cost performance is higher than the awning.

Can plant some vegetables, fruits, fruits, and vegetables on the roof, this kind of method can be planted on the roof of the building immediately, and can also use some large and medium-sized foam boxes to carry out planting, or build a simple iron shelf, plant some climbing climbing vine plants, etc., this method can have an effective thermal insulation effect, and at the same time can eat fresh vegetables and fruits, killing two birds with one stone, but this method should do a good job in drainage work.

The roof design scheme can be used as a reservoir, and then 20-30 cm of water of relative height can be introduced, so that it can have the actual effect of heat insulation, if the load capacity of the roof is strong, the swimming pool can be completed, but this method must be done well in the moisture-proof work.

Roof insulation belongs to the surface insulation, and can also be applied to the room insulation, such as adding a heat insulation board or heat insulation cotton in the case of a ceiling ceiling, which can not only be naturally ventilated, but also have the actual effect of heat insulation.

If you settle on the roof and the room temperature is high, it is really annoying, then we try to choose cool colors, such as dark blue, in the case of house decoration and the color selection of actual wood furniture. Emerald green, especially curtain fabrics, should choose cool shade curtains with a very good shading effect, which will reduce the feeling of extreme heat.

Photovoltaic insulation, you can install photovoltaic on the roof of the building, the thermal insulation effect of photovoltaic is very good, and it is also a good choice to build a photovoltaic roof on the roof. An extra layer of space can also be insulated; Because photovoltaics can reflect part of the sunlight and part of the ultraviolet rays, they can also convert solar energy into electricity. Therefore, it can reduce the temperature in the house.

I think the best thing to do is to install a layer of fireproof foam, which not only insulates the sound, but also the temperature.

It is also very convenient to put an insulation layer on the roof, or to make a swimming pool, and use water as insulation, and the effect is also good.

The inverted roof insulation and waterproofing in the south is to do waterproofing first, and then lay insulation boards on top to make a protective layer.

To do upright roof insulation and waterproofing in the north, it is to make the insulation layer first, and then make the waterproof layer and protective layer on it.

What kind of insulation board is very important, the general extruded board is a thermoplastic material, which is easy to age and shrink, resulting in roof cracking and water accumulation.

Thermosetting phenolic foam insulation boards can be selected, which are dimensionally stable and resistant to aging.

Aerogel is the world's least dense solid and, of course, the lightest, with the highest proportion of air. Because of its translucent color and ultra-light weight, it is also known as "frozen smoke" or "solid smoke". So what are the physical and chemical properties of such a light material?

Vitrified microbead inorganic insulation mortar, light weight, and fireproof, but also affordable.

First, to be light, thermal insulation and heat insulation, use foam insulation, because foam has the following characteristics such as light weight, heat insulation, sound absorption, shock absorption, etc.

Second, other methods of thermal insulation on the roof:

1. A 10 cm thick pearl sand insulation layer can be laid on the roof, and then a layer of cement prefabricated heat insulation board can be made;

2. If it is a reinforced concrete cast-in-place roof, a 20 cm thick soil layer can be stored on it for greening and planting flowers and plants, which not only beautifies the environment, but also has the effect of thermal insulation.

It is best with cotton! It is recommended to use glass wool felt, Kunnai brand.

Polystyrene board, organic materials are very light!!

The thermal insulation structure is simpler than the thermal insulation structure, and the cost is also low, and there are three main methods:

1. Set up overhead thermal insulation layer: this is a kind of construction thermal insulation measure that is widely used at present. By setting up an overhead insulating layer on the roof and leaving a ventilation surface around the roof, the flow of air in the overhead layer is used to take away the radiant heat, and then the temperature of the inner surface of the inner layer of the roof is reduced, and the thermal insulation effect is better.

The overhead insulation layer can be either prefabricated insulation panels or prefabricated reinforced concrete slabs with brick stacks. Usually the thermal insulation layer is set on top of the roof waterproof layer, which can play a protective role in the waterproof layer.

Overhead ventilation insulation.

2. Heat insulation with solid materials.

3. Use material reflection to cool and insulate heat.