What should I do if the card slot of the memory card inserted in the Samsung phone is broken

In this case, it is necessary to judge the physical mobile phone after on-site inspection. It is recommended to send the mobile phone to the nearest service center for testing, and the service center will determine the specific problems and accessories of the mobile phone according to the test results, whether it is within the scope of repair and repair**.

The only way to change the card slot is to go to the specialty store! At most, 50-60 can be picked! Just pay attention next time!

First make sure that the card slot is really broken, and use another memory card to see if the card can be read.

Clean the place where the card is in contact with the metal of the memory card with alcohol and try again.

Go to Samsung's after-sales service!

Go to Samsung's after-sales service! It's a little more reassuring, and it's not expensive.

1. Find the place with the largest gap in the card pick-up.

2. Slowly insert the blade along the gap of the leaky base card.

3. After inserting the blade, gently pull it out.

4. In this way, the SIM card slot can be easily unplugged.

Precautions: 1. The current shock during power-on operation is likely to cause damage to the SIM card, so please turn off the power of the mobile phone before taking out or putting in the SIM card.

2. Do not bend the SIM card, and the metal chip on the card should be carefully protected.

3. Keep the metal chip clean and avoid contamination with dust and Egyptian chemicals.

4. Please avoid frequently withdrawing the SIM card from the phone.

5. Do not put the SIM card in an environment where it is more than 85 or less than -35.

Mobile: vivox23.

System:. The method of taking out the card when the mobile phone card slot is broken is mainly divided into five steps, and the specific operation is as follows:

1. First of all, prepare a maintenance and dismantling tool, such as fine-tooth pliers, screwdrivers, marking pliers, etc.

2. Open the back cover of the phone, observe the internal structure, and find out where the card slot is located.

3. Prepare maintenance tools, find out the upper and lower screws of the card imitation keyway, and gently unscrew them with a screwdriver, do not over-twist.

4. The mobile phone card slot can be slowly disassembled, put the mobile phone card on the tip grabber, and slowly pull it out.

5. After completion, you can clean the mobile phone card slot and its internal disassembly accessories, and then reinstall it. <>

Use tape or tweezers to pull it out slowly, here's how to do it:

1. Use the tape method: You can use the tape to glue the card slot with the shell of the mobile phone, and then gently pull out the card slot. Please note, however, that this method may cause damage to the phone, so use it with caution.

2. Use a needle or toothpick: Use a thin needle or toothpick to gently pull out the card slot. But be careful not to use too much force, or you may damage your phone.

3. Find a professional for help: If none of the above methods work, it is recommended to find a mobile phone repair shop or after-sales service center for help. <>