VMware s NIC setup mode

No need to set up, it automatically recognizes, as long as your host can access the Internet, the virtual machine will do.

1. Set the Internet access mode to host-only.

3. Set the IP address of VMNet1 and do not set it in the same network segment as the physical NIC.

4. In the virtual machine, set the address of the network card to the same network segment as VMNet1, set the gateway to the address of VMNet1, and set the DNS according to the local situation.

Turn off the virtual machine, select the menu "Virtual Machine" "Power" "Enter BIOS on Boot", press the arrow keys to select Boot in the settings BIOS, press the + key to adjust the network card to the top, and then press the F10 key and enter key to save the settings and restart the virtual machine.

1. Run the command prompt as an administrator.

Because the steps below must be run under administrator privileges, we find "Command Prompt" from the start menu, or type cmd directly for a quick search, and Paiheng right-clicks on it, selects "Run as administrator", and clicks "Yes" in the pop-up user control window. Another way is to hold down the Ctrl and Shift keys and click directly on the shortcut, which is even easier.

2. Enable and set the "virtual wifi network card" mode.

Run the following command to enable the virtual wireless network card (equivalent to turning on the router):

netsh wlan set hostednetwork mode=allow ssid=”win7 ap wow!” key=wifimima

There are three arguments in this command:

mode: Whether to enable the virtual Wi-Fi network card, change to disallow to disable, and the virtual network card will disappear.

SSID: Specifies the name of the wireless network, preferably in English.

key: specifies the password of the wireless network. This password is used to encrypt the wireless network with secure WPA2, which can prevent the network from being rubbed off.

The above three parameters can actually be used separately, for example, only using mode=disallow can directly disable the virtual wifi network card.

3. Enable "Internet Connection Sharing (ICS)".

In order to share the connected internet with other computers or devices, we need to enable the "Internet Connection Sharing" feature. Open the "Network Connection" window, right-click the network connection that is connected to the Internet, and select "Genus".