In the CDR, some of the fonts are gray, and what is the reason why you can t use them

cdr font gray This is caused by the state of the input method, the culprit that the coreldraw font is gray comes from "ch" (Chinese Simplified - American keyboard), although we input English characters, but because it is entered under ch, so cdr is considered to be Chinese characters, only for Chinese fonts, English fonts are always gray not optional state.

A large part of the English font,You need to enter the "English" input method state,So add an English input method:The step is to right-click on the status bar input method in the lower right corner of the screen。

Then in the pop-up window, click "Add", in the "Input Language" field, select "English (UK)", and in the "Keyboard Layout Input Method" field, select "US Keyboard".

Right-click on the status bar input method in the lower right corner of the screen.

Then in the pop-up window, click "Add", in the "Input Language" field, select "English (UK)", and in the "Keyboard Layout Input Method" field, select "US Keyboard".

Once you've added it. Then when you enter the letter in CDR, left click on the status bar input method in the lower right corner of the screen and select EN English (UK), and you can do it.

If that doesn't work, try the following:

Method 1: Change the "ch" to "en" on the right side of the start status bar and enter the English font. Method 2:

1. First of all, you must make sure that there is no installation, enter C: Windows Fonts to see if there is a new Chinese font installed, if not, you can manually copy and paste the font files in the CorelDraw disk into the folder. 2. Secondly, you have to determine whether your coreldraw is the Chinese version or the English version or the Chinese version, it is possible that the Chinese font is not represented by Chinese characters but in pinyin (such as:

It is denoted as "songti"). 3. Eliminate the first two reasons, again it may be a problem on the installation, according to other software installation experience, you need to choose other countries when choosing a country, so that some software supports Chinese. 4. In addition, call in the character items in the coreldraw (i.e., the work panel) to see if you can select or drag out the Chinese characters of other fonts.

When loading the font, the file is corrupted.

1. Open the CDR document, the font of the document is missing. The Alternate Font with missing font dialog box pops up.

2. Select "Use the PI large section recommended by PANOSE". Only close fonts can be matched, not the original fonts.

3. Select "Alternate Font" and choose from the list below.

4. You can choose whether the substitution method is temporary or permanent.

5. When you finish saving the coreldraw file, check the box under the "Save Drawing" dialog box.

Tick, "Use turedoc to embed fonts".

6. Click "Accept" in the pop-up dialog box, so that you can embed the font into the document and save it together.

Notes:

CorelDraw shapes, transforms, aligns, distributes, and Boolean operations on graphics.

and other operations coreldraw to retouch the graphics (monochrome, gradient, pattern, material, mesh, etc.).

in the tool. Among the options, in the regular selection card, remove the check mark in front of the option to ignore other programs.

Can you elaborate on it or take a screenshot?

You don't seem to understand that very well.

1. Open the CDR document, the font of the document is missing. The Alternate Font for Missing Font dialog box pops up.

2. Select "Use Panose Suggested Matching". Only close fonts can be matched, not the original fonts.

3. Select "Alternate Font" and choose from the list below.

4. You can choose whether the substitution method is temporary or permanent.

5. When completing the coreldraw file for saving, check the box below the "Save Drawing" dialog box, "Embed font with turedoc".

6. Click "Accept" in the pop-up dialog box, so that you can embed the font into the document and save it together.

Notes:CorelDraw shapes, transforms, aligns distributions, Boolean operations and other operations on graphicsCorelDraw retouches graphics (monochrome, gradients, patterns, materials, meshes, etc.).

C disk:"Windows" folder has a font fonts folder,Put the fonts you need in it,Then open the software and have it。

Hold down F8, double-click CDR and then turn CDR on and you're good to go.

3 All 1. Open the CDR document, the font of the document is missing. The Alternate Font for Missing Font dialog box pops up.

2. Method 1: You can choose "Use the matching suggested by Panose". Only close fonts can be matched, not the original fonts.

3. Method 2: Select "Alternate Font" and select from the list below. (If you can find the original font by the name of the missing font, you can install it in the font library and reopen the file.) ）

4. You can choose whether the substitution method is temporary or permanent.

5. The best way is to use turedoc to embed fonts. When you finish saving the coreldraw file, check the box below the "Save Drawing" dialog box, "Embed fonts with turedoc".

6. Click "Accept" in the pop-up dialog box, so that you can embed the font into the document and save it together.

The reason why the installed font is greyed out in the cdr file may be because the font file is not embedded in the cdr file. When you use a font in CorelDraw, if the font is not embedded in the file, CorelDraw will try to use a similar font in the system instead, but it will be grayed out to show the difference.

The reason why the font is not embedded may be due to copyright protection considerations, and the font vendor may have restricted the embedding permission of the font. In addition, some special fonts may not be embedded.

Extended content: To solve the problem of fonts being grayed out, you can consider the following methods:

1.Embed fonts: In CorelDraw, you can choose the option to embed fonts, which will ensure that fonts are displayed correctly on other devices. However, it is important to note that some fonts may be copyrighted and cannot be embedded.

2.Convert to Curves: Converting text to curves avoids font display issues, but it also means that you won't be able to roll over the text content. This is useful for some special fonts or when you need to ensure font consistency.

3.Use alternate fonts: If you can't embed a font or convert text to curves, try choosing an alternative font that is similar to the original font. While there may be slight differences, you can be sure that the text will look normal on other devices.

In summary, the problem with fonts showing gray is usually caused by fonts not being embedded in the file. When dealing with this issue, you need to choose the appropriate workaround on a case-by-case basis to ensure that the text is displayed correctly on different devices.

The reason why the installed fonts are grayed out in CDR (CorelDraw) software can be due to several factors:

1.Unsupported font file formats: Some font file formats may not be supported by CDR software, resulting in installed fonts not loading correctly. In this case, you can try using a different font format or re-file from a reliable font file.

If these plugins or components are missing, the installed fonts may not display properly. Check for software updates to make sure you have the latest version of CDR software installed and that font-related plugins have been installed.

3.Conflicting or corrupted font files: Sometimes the installed font file may conflict with a font file already on the system, or the font file itself may be corrupted and cannot be loaded and displayed correctly.

In this case, you can try uninstalling and reinstalling the font, or use the font manager to resolve the conflict.

Extended content: In addition to the reasons mentioned above, the problem of gray display fonts may also be related to factors such as computer operating system, font settings, and missing fonts. Making sure your operating system and software are up to date, checking that the font settings are correct, and making sure that the font files you need are installed and available can help resolve the issue of fonts being greyed out.

In addition, you can also try using other design software to see if the font is displayed properly to determine if the problem is limited to CDR software. If the problem persists, you may need to seek professional technical support or consult a font-related expert. Cover and.

There may be a few reasons why the installed font is grayed out in the CDR (CorelDraw) software:

1.Missing Font Files: First, check if the installed font files are complete and present in the system font folder. If the font file is corrupted or incomplete, the software may not load the font correctly, causing the font to appear gray.

2.Unsupported font formats: Some special font formats may not be supported by the CorelDraw software, such as some very rare font formats or the latest font formats.

In this case, the software may not be able to parse the font correctly, resulting in the font being grayed out.

3.Font licensing issues: Some fonts may be copyrighted and require purchase or licensing in order to work properly in the software. If you use unauthorized font files, the software may be grayed out to remind you that you need to purchase or obtain a license.

When solving the problem of fonts showing gray, you can try the following methods:

2.Check if the font format is supported by the software, if not, you can try converting the font file to the format supported by Coreldraw, or choose another compatible font.

3.Make sure you have a legal license to use the font, if not, you can buy the font or find a free licensed font alternative to Yesongda.

In addition, to ensure that the font is displayed properly in CorelDraw, it is recommended to use a common font format (such as TrueType or OpenType) and get the font file from a trusted **.

In CorelDraw, if your installed font is grayed out, there are a few reasons for this:

1.Fonts aren't installed correctly: Make sure you've installed the fonts correctly. You can check whether your font has been successfully installed in the font options in the control panel.

2.Font incompatibility: It is possible that your font type is not supported by CorelDraw. For example, some versions of CorelDraw may not support OpenType or TrueType fonts.

3.Font conflicts: If you have a large number of fonts installed in your system, it can lead to font conflicts. You can try uninstalling some fonts that are not commonly used and see if the problem can be resolved.

4.Software Problem: If none of the above methods can solve the problem, then it may be a problem with the CorelDraw software itself. You can try upgrading to the latest version or reinstalling the software to see if the problem is resolved.

Remember, it's a good idea to restart CorelDraw every time you install or uninstall a font to make sure it reads the new font settings correctly.