05 Buick Kaiyue, the antifreeze has not been replaced, when to replace the antifreeze

Hello, I suggest that you can change it once in three years or 30,000 kilometers, I hope mine can help you, I wish you a happy car!! If you have a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

Hello, it is recommended that three years or 50,000 kilometers [If you have a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

How often to change the antifreeze depends on the formula of the coolant, the life of silicates is about 2 years, the usual life of organic acids is relatively long, if the original vehicle is certified, organic acids can be used for up to 4 years; The coolant should not be used for an extended period of time, which will cause corrosion to aluminum parts, rubber parts, etc. The antifreeze of the different brand and model should not be mixed at the same time to avoid chemical reactions.

Swap it out now! If you have a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

The steps for changing the antifreeze for the Buick Excelle are as follows:

1. Press the one-button start button configured by Kaiyue to turn off the engine.

2. Turn off the power and stand the engine until the water temperature drops to room temperature.

3. Open the driver's side door.

4. Pull the front flip switch to turn on the front flip.

Fifth, lift the forward flip, stable and fixed.

6. Slowly unscrew the lid of the small kettle and release the pressure.

7. Disconnect the return pipe of the water tank and reconnect the pipeline after draining the antifreeze.

8. Fill a small kettle with antifreeze.

9. Operate until the water temperature is stable at a normal water temperature of 90 degrees for a long time, that is, the operation is completed.

Drain the air by unscrewing the small kettle lid under the hood. Refill with antifreeze.

1. Press the brake pedal.

2. Press the one-button start button.

3. Operate the water temperature to 90 degrees.

4. Stand the engine until the water temperature drops to normal temperature.

5. Pull up the forward flip switch.

6. Lift up and flip forward.

7. Slowly unscrew the lid of the small kettle to drain the air.

8. Replenish antifreeze to the upper limit to complete the operation.

Antifreeze should be replaced when the car is hot.

Be sure to cover the lid of the water tank with a damp cloth and then slowly unscrew it (to avoid burns), and then unscrew the water drain screw under the water tank (in order to prevent burns, it is best to wrap it in a thick cloth and twist it), and then start the engine to let the water pump run after a certain extent, so as to fully drain the antifreeze in the original car: use the tap water pipe to insert the water tank upper water outlet and water channel for flushing, and then also operate on the car, the purpose is to make the water pump help the water circulation, wash the inside of the cooling system more cleanly, and then empty it again. At this time, tighten the drain plug, pour in new antifreeze, start the engine again after filling up, let the speed be high (about 1500 rpm), and wait for the antifreeze to circulate for a while and fill it up again, it is basically OK.

Pour the remaining antifreeze into the refill tank, be careful not to exceed the upper limit, and then put the remaining antifreeze in the trunk for later use.

Buick Kaiyue coolant replacement method steps.

1.Open the canopy of the vehicle and support the support bar.

2.Open the lid on top of the antifreeze jug.

3.The drain screws for antifreeze can be seen underneath the tank.

4.Twist the screws out for draining.

5.After draining the antifreeze of the original car, add new antifreeze.

6.Be careful to wait for the antifreeze of the original car to drain completely.

7.Finally, add a new antifreeze. Note that antifreeze is recommended to use the original.

8.Finally, close the lid of the antifreeze jug and you're done.

If the Buick Kaiyue is replaced with a new antifreeze, this needs to be emptied.

The Buick Excelle antifreeze replacement tutorial is:

1. Open the cabin cover of the vehicle and support the support rod; 2. Open the lid on the antifreeze jug; 3. You can see the drain screw of antifreeze under the water tank; 4. Screw out the screws for liquid discharge; 5. After draining the antifreeze of the original car, add new antifreeze.

What is Antifreeze? Antifreeze is the coolant that can prevent the coolant from freezing when parking in the cold winter, while the expansion and cracking radiator and freezing the engine cylinder block, the full name is antifreeze coolant.

I hope my above can help you.

Ordinary cars are used for 2 years or about 40,000 kilometers, and they need to be replaced and refilled once, and if they are commercial vehicles, the frequency of antifreeze refueling should be more frequent. Maintain your car at regular times.

In the process, it is necessary to pay attention to the balance of antifreeze in Guandan, and once the liquid level of antifreeze is lower than the minimum water level scale, it also needs to be replenished in time.

General automotive antifreeze.

The standard capacity is about 4 liters, and the ordinary one-liter antifreeze is about 40 yuan, which requires 4 barrels, and the cost of working hours is generally about 200 yuan for adding antifreeze.

1. First of all, you must see the antifreeze filling port, and there is a similar thermometer on the lid of the antifreeze pot.

Triangle symbol identification.

2. Different brands and colors of antifreeze cannot be mixed, and chemical reactions will occur with different ingredients and different formulas.

Affects the performance of antifreeze.

3. Choose a high-quality product mold crack bucket of the same brand and model as the original antifreeze.

4. The antifreeze has a certain corrosiveness, do not touch ** and other rubber parts, if there is any splashing, it should be rinsed with water in time.

5. Antifreeze can not be replaced with water, nor can it be added with water, the freezing point of water is low, and the water contains a large number of anion and ion, which will form scale after a long time, resulting in plugging the source.

6. Don't add too much antifreeze, not too little, generally there is a water level scale on the antifreeze kettle, add it to the highest water level and the lowest water level scale.

7. Add antifreeze must wait until the vehicle is turned off and cooled, in case the cover is opened at high temperature, and the internal pressure will spray the antifreeze out, and there will be burns. Risk.

The steps for replacing the antifreeze in the Buick Kaiyue are as follows: Pat know.

1. Press the one-button start button configured by Kaiyue to turn off the engine.

2. Turn off the power and stand the engine until the water temperature drops to room temperature.

3. Open the driver's side door.

4. Pull the front flip switch to turn on the front flip.

Fifth, lift the forward flip, stable and fixed.

6. Slowly unscrew the lid of the small kettle and release the pressure.

7. Disconnect the return pipe of the water tank and reconnect the pipeline after draining the antifreeze.

8. Fill a small kettle with antifreeze.

9. The water temperature is stable at 90 degrees for a long time, that is, the operation is completed.

In 2003, the specific operation steps of the Buick Kaiyue after changing the antifreeze after the exhaust process are as follows:

1. Press the brake pedal.

2. Press the one-button start button to start the engine.

3. Run the engine until the water temperature reaches 90 degrees, and turn off the engine.

4. Stand the engine until the water temperature drops to normal temperature.

5. Pull up the forward flip switch.

6. Lift up and flip forward.

7. Slowly unscrew the lid of the small kettle to drain the air.

8. Replenish antifreeze to the upper limit to complete the operation.

Buick Excelle adds about 6 liters of antifreeze, but the specific amount of addition needs to refer to the car's manual.

For car owners, when buying antifreeze, don't leave some of the last antifreeze in the storage tank, in order to avoid waste, add a new antifreeze, but you don't know that different brands of antifreeze due to the different ingredients used.

The mixing of the two may lead to a series of chemical reactions, which will greatly reduce the effectiveness of antifreeze, and even cause damage to the car's cooling system in serious cases, so car owners must not mix different brands of antifreeze. Be sure to choose a product that has been formally inspected, otherwise it will lead to damage to the car's cooling system and even lead to engine damage.

Hello, one bucket is usually enough, depending on whether you run out of antifreeze. I hope you find my answer helpful, and feel free to follow up. If you have a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

A bucket or so [If you have a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

The normal replacement cycle for antifreeze is 2 years.

Other precautions for antifreeze:

1. Before completely replacing the antifreeze, you should first do a comprehensive inspection to see if there are traces of leakage in the mid-range pipes, whether there are cracks, the key is to check the five-way water pipe, the five-way pipe is named because there are five interfaces connecting various parts, and the antifreeze is distributed to different parts of the car after flowing through the five-way pipe.

2. Do not directly fill the antifreeze mother liquor, the purer the better, the direct injection of antifreeze mother liquor, there will be antifreeze deterioration, low temperature viscosity increase and high engine temperature, etc., affecting the service life of the vehicle. Secondly, the engine cooling system must be cleaned before filling with antifreeze. Antifreeze can remove scale, but if added directly, it will clog the water pipes with the scale that has fallen off, causing poor heat dissipation.