How to use your phone to cast to a computer, how to cast a mobile phone to a computer

If you are using a Huawei mobile phone, you can connect to the laptop in one of the following four ways:

1. Touch.

1. Turn on the NFC function on the phone and touch the HUAWEI Share tag (or Magic-Link tag) on the back of the phone (near the rear lens) to the HUAWEI SHARE tag (or Magic-Link tag) on the laptop (notebooks without NFC tags can be picked up for free at an officially authorized Huawei store).

2. Some notebook NFC has an antenna built into the touchpad, and there is no NFC tag on the computer, so the connection can be triggered by touching the mobile phone to the notebook trackpad.

3. When the connection between the mobile phone and the laptop is established for the first time, the mobile phone has a user privacy statement, and you need to agree to the user license agreement; If you are not connected for the first time, you only need to confirm it on the PC.

2. Sweep it.

Open PC Manager >> My Phone >> Connect Now, select Scan Code Connect or tap the upper left corner to switch to the Scan Code Connect page, open HUAWEI Browser or Smart Vision on your phone, and scan *** to connect; After successfully scanning the code, click "Connect" on the mobile phone and "Allow" on the notebook according to the prompts.

3. Proximity to the connection.

Turn on WLAN and Bluetooth on the mobile phone, and at the same time open the Computer Manager "My Phone" on the computer to connect immediately, and then directly close to the keyboard and follow the mobile phone prompts to connect successfully.

Fourth, wired connection.

1. This method is only supported in versions and above.

2. The PC Manager version needs to be updated to and above;

3. If you use a docking station adapter to connect the data cable and the PC, make sure that the computer connection port is not only the charging port, otherwise it will not be supported.

Connect the Huawei phone and Huawei PC with a wired connection or data cable, and the phone will be unlocked and the screen is on, and the connection will be successful by following the prompts on the phone.

Both the computer and the mobile phone install the screen projection software, and then you can do it.

Mobile phone screen projection smart TV,I believe everyone will operate,So how to project the mobile phone to the computer,Operate the mobile phone screen through the keyboard and mouse。 According to the user's environment, there are different ways to cast the screen, which will be discussed in detail below.

1. Win10 operating system.

If the computer is installed with win10 operating system, then the original ecology supports the mobile phone screen projection function, as long as the mobile phone and the computer are located in the same network segment, the specific operation steps are as follows.

Step1: Open the [Start] menu, select the [Settings] icon on the left side, open the Windows Settings dialog box, and click the [Phone] settings menu as shown in the figure below.

Step 2: After opening the phone settings dialog box, tap [Go to Experience Sharing Settings], as shown in the following figure.

Step 3: After opening the projection settings dialog box, select the [Project to this computer] menu in the function menu on the right, set the projection options, and select [All locations are available] according to the settings shown below.

Step5: After the mobile phone is connected to the computer that can be projected, a dialog box will pop up on the computer to display the PIN code of the connection, and after the mobile phone is entered, the mobile phone screen can be projected to the computer, as shown in the figure below.

2. With the help of third-party software.

If the computer is installed with win7 and other operating systems, it does not support the original ecological projection, and you need to install third-party software, such as the commonly used "Lebo projection", "Leyi screen", "apowersoft", etc.

As long as the devices at both ends are located in the same network segment, after opening the software, find "Projection" in the software interface to connect, and project the mobile phone screen to the computer.

Using the software projection method, you can realize mobile phone screen projection computer, computer screen projection mobile phone, computer screen projection computer, etc., and you can achieve one projection more, as long as the relevant software is installed.

3. Data cable.

The above introduces three ways to project the screen of the mobile phone, among which the use of win10 operating system comes with the projection method is the most convenient, most of the third-party projection software is charged, otherwise there are various restrictions on use.

The screen of the mobile phone can be projected to the computer by using the AirDroid Cast software, which can realize the projection of multiple devices to each other, which is simple to operate, and the connection quality is clear without delay or lag.

Install "AirDroid Cast" on your computer or phone.

Connect the mobile phone and the computer to the same wifi network, and use the mobile phone to enter the nine-digit code on the computer to realize the mobile phone screen projection computer.

In addition, AirDroid Cast can also realize mobile phone screen projection web page, computer screen projection computer, computer control mobile phone and other operations. Basically, it can help you solve all the problems of wireless screen mirroring devices.

Taking Huawei phone as an example, you can use the following steps to cast your Huawei phone to your computer:

Make sure your Huawei phone and computer are connected to the same Wi-Fi network.

Turn on the "Multi-screen Collaboration" feature on your Huawei phone. The specific opening method may vary depending on the model, you can search for "multi-screen collaboration" in the settings or pull down the notification bar to find the "multi-screen collaboration" icon to open it.

After confirming the projection request on your phone, the screen content of your Huawei phone will be displayed on the computer.

Note: If your Huawei phone does not have the "Multi-screen Collaboration" app pre-installed, you can search for it in the HUAWEI App Store**. When using Multi-Screen Collaboration, your computer and Huawei phone need to be connected to the same Wi-Fi network, otherwise you will not be able to cast the screen normally.

1. Make sure that the mobile phone and the computer are in the same LAN environment.

2. The computer (for example, win10 system) enters the "Settings" interface, selects "System", and clicks on the projection to this computer in the open interface.

3. Make the corresponding settings (select: all locations are available, every time you request a connection, check: auto-pairing).

5. Wait for the phone to scan the device, and then click on the device you want to connect, then your computer will pop up a reminder that you need to pair, just like Bluetooth pairing, select Yes, and then the phone screen will be displayed on the computer.

1. The mobile phone comes with "wireless projection".

Now Android mobile phones,Basically, it will come with this "wireless projection" function,As long as your computer system is windows10 or above,We can achieve wireless projection,And the projection effect is very good。

1. We press the Win + I shortcut key on the computer keyboard to open "Windows Settings".

2. Then click on the "System" option to enter "Project to this computer".

3. Then click on the "Launch the 'Connect' app to project to this computer" link, and the computer screen will enter the "Wireless Connection" state.

4. Then find the "Wireless Screen Projection" function on your phone.

Second, through the "projection software" to achieve.

If you can't achieve screen projection through method 1, we can also use the "screen projection software" to achieve screen projection. There are a lot of projection software now, here, take Airdroid Cast as an example to make a demonstration. **airdroid cast

1. First of all, install the AirDroid Cast software on your computer and mobile phone.

2. After the installation is complete, turn on AirDroid Cast on your computer.

3. Then turn on AirDroid Cast on your phone, you can click the Scan button in the upper right corner to scan the *** on AirDroid Cast on your computer, and you can cast your phone screen to your computer.

Through the above 2 methods, we can easily cast the screen of the mobile phone to the computer. If you also have this need, then give it a try.

1. Android mobile phone - multi-screen interaction.

Some Android phones come with the function of "Clanfeng multi-screen interaction", such as on Huawei mobile phones, you can find this function by dropping down the phone status bar next to the cover.

You can also find this feature in "Settings - Advanced Settings".

When the mobile phone and the computer are in the same network condition, the computer turns on the "projection to this thing spike oak computer", and the mobile phone can search for the computer equipment through the screen projection function, and the screen can be projected. Set it up once, use it for life, it's very convenient.

2. iPhone - screen mirroring.

For Apple mobile phones, it is even more convenient, turn on "Screen Mirroring", connect the two devices with the same wifi, and you can project the screen. But this feature is limited to projection from Apple phones to Apple computers.

3. Projection software.

Open the software on your computer and it will generate a ***. Open the screen projection interface of the mobile phone, scan the *** on the computer, and you can carry out the screen projection operation. It is suitable for Android and Apple phones, and it can also cast the screen remotely.

The Windows 10 system has added a wireless screen projection function, that is, you can cast the mobile phone screen to the computer.

The premise of using the Windows 10 wireless screen mirroring function is that the computer and the mobile phone must be connected to the same WiFi, and must be connected to the WiFi. If the computer makes Yu Xi use a network cable, it will not work.

This function is hidden under the "projection" function, which is the win+p that we usually use to connect to the projector. In this panel, you'll find an option at the bottom that says "Connect to a wireless monitor", and Windows 10 will automatically search for other display devices that support the Miracast protocol. For example, if your TV supports miracast, you can project the win10 desktop directly to the TV after connection.

The specific steps are as follows:

1. Open the [Operation Center] on the computer, and then click the [Projection] button;

2. Then select [Project to this computer];

3. When you agree, Windows computers and mobile phones can be projected to this computer and modified to [All locations are available];

4. Open the wireless display in the phone settings;

5. At this time, the computer will show an invitation prompt, and we need to accept the connection request;

6. After the connection is completed, we can see the content in the mobile phone on the computer screen!

How to cast the screen of a mobile phone to a computer screen? If you want to cast your phone to your computer more conveniently, you can consider using Airdroid Cast projection software. You can wirelessly transfer the phone screen to the computer screen through the network, this method is suitable for Android or Apple mobile phone screen projection to Windows or Macbook.

Install and run.

Open the software on the computer, and a projection code and a projection code will appear on the [Wireless] page.

Open the software on your phone, enter the collapse projection code on the computer, and then click the "Cast Screen" button.

The desktop of your computer should automatically pop up a connection prompt, select Allow. Finally, the connection is successful, and the pop-up window of the mobile phone selects "Start Now", and the screen will be displayed on the computer.

You can also choose other suitable ways to project the screen with a wide code:

Windows 10 comes with a projection feature

With the built-in projection function of the Windows 10 system and the wireless screen projection function of the mobile phone, you can project the screen of the mobile phone to the computer.

iPhone screen mirroring feature

Turn on the Wi-Fi function in the [Settings] of the iPhone and connect to it; Open the Control Center page, click the [Screen Mirroring] icon, the phone will automatically search for peripheral devices, and click to connect after searching.

The steps to project the screen from your phone to your computer are as follows: Keep your eyes openTools Raw materials: Dell Burn 7000, Win10 Home Edition, Huawei mobile phone, EMUI.

1. Open the start option at the bottom left of the computer and click Settings to enter.

2. After entering the settings, select the options of the system.

3. In the system settings, click the projection to this computer option on the left to enter.

4. Once you click Enter, set it to be available in all locations.

<>6. After clicking, Qiaoshanzao selects the wireless projection option of the mobile phone.

<>8. After clicking on filial piety, the computer will prompt the connected window, click OK.

9. After confirmation, you can project the mobile phone screen to the computer.