How to use the touchpad on Huawei computers?

1. Tap function: Open System Settings - Keyboard & Mouse - Touchpad - Tick "Tap, Drag" and "Use Two Fingers". ”

2. Right-click function: touch the touchpad with two fingers at the same time.

3. Zoom in on the screen: Press two fingers on the touchpad at the same time and move it up and down.

4. Drag the screen: After one finger is pressed on the touchpad, the second finger moves up and down on the touchpad.

Other. If you want to flip the page, you can click on the touchpad first, and then combine the up and down arrow keys on the keyboard ( Turn the page, press and hold the arrow keys to turn the page continuously, or press the paup and padn keys to turn the page one by one.

If you want to open a document or program, point the arrow at it and hit it twice in quick succession on the touchpad, or point the arrow at the program or document, then press the right button on the touchpad and click to open it when prompted.

If you want to move a window, you can point the arrow at it, hold down the right button on the touchpad with your left hand, and slide on the touchpad with your right hand.

Try the up, down, left and right buttons.

Go to the Control Panel.

click,Click on the hardware and sound,Then click on the device and printer inside,There is a mouse in it,Click on,Find the attribute item inside,Then there is a trackpad in it,Cancel the enable box in front of the touch item,Different notebooks are a little different,You can also press the shortcut key directly。

The FN+F8 shortcut key may be different for each machine, you can find it, try it, and cancel the box in front of it.

The trackpad is the same as the mouse, but some people are not used to it, well, a single machine and a double click are all you can do.

The computer touch screen switch can be found by pressing the [FN+F9] key combination on the keyboard, or by entering the fixed-point device properties and clicking [Device Setting Value]. Beam is missing

Demo Huai Zhazi model: Huawei lead absolute matebook 16 system version: windows10

Operating Software: Settings.

1. Click "Start" and select "Settings".

2. Click "Devices" and select "Touchpad".

3. Turn on the "Touchpad" switch.

4. Or you can use the shortcut key to open the notebook touchpad, different brands of laptops have different shortcut keys, take ASUS notebook as an example, press the "FN+F9" key at the same time to open the touchpad.

Taking Huawei Note Selling Spine Computer Win10 as an example, the steps to turn on the touch screen function on Huawei laptop are as follows:

1. First of all, you need to click the Windows button in the lower left corner of the desktop of the computer, and a Windows menu will pop up.

2. Then find a button icon for settings in the pop-up menu, which can be found above the power button, and click the "Settings" icon.

3. After clicking on the settings, a "Bihe Windows Settings" will pop up, in which you can see a setting called "Device", click "Device".

4. After entering the settings of the device, you can find a setting called "Touchpad" at the bottom, and then click "Touchpad".

5. On the right side, you can see a "Touchpad", there is a "Touchpad" switch below the "Touchpad", click the switch below the "Touchpad", and then turn on the switch that allows the "Touch Confession Pai" to save the opening status when connecting the mouse, and the touch screen of the Huawei laptop is opened.

First, the use of a single touchpad.

The operation of the single-touch touchpad is relatively simple, but it has fewer functions and is not suitable for complex operations.

Here's how:

Tap – single machine selected; Double-tap to open the operation; Double-tap without lifting your hand to move – select multiple files to move a single file. It's important to note that if you have the appropriate trackpad driver installed, you can add some simple gestures.

Second, the use of multi-touch pads.

A multi-touch pad is a touch panel with a transparent sensing pure noise medium, and some panels also add the left and right buttons of the mouse, similar to the traditional single-touch pad. As long as you move your finger on the touchpad, it is simple and practical, and can completely replace the traditional mouse.

Here's how:

Tap it - check the stupidity - the stand-alone machine is not in the waiting; Double-tap to open the operation; Double-tap without lifting your hand to move – select multiple files to move a single file. Two-finger swipe – scrolling interface; Two-finger zoom – shrink or zoom in**; Three-finger swipe - toggle the program interface.

If you are using a Huawei notebook and the trackpad fails, you can perform the following steps:

1.Please check if it is due to misuse.

If you want to do a mouse click or swipe, you can only do it with a single fingertip tap or swipe, and if the finger contact area is too large (placing the whole finger on the trackpad) or if you use multiple fingers, the operation will fail.

2.Check if the trackpad driver is disabled.

You can right-click the Windows icon in the lower left corner to open Device Manager, right-click on the HID-compliant touchpad in Device Manager > Human Input Devices, and then restart your computer to try again.

3.Confirm whether the computer is asleep or hibernating.

In order to prevent the system from being woken up by accidentally touching the touchpad and affecting your use, the software cannot be set to wake up through the touchpad. Therefore, when you are asleep or dormant, tapping or swiping the trackpad does not respond, please wake up the system by tapping the key or pressing the power button before operating on the trackpad.

4.Please check that the trackpad function is turned off.

Tap Start > Settings > Devices > Touchpad to see if the touchpad switch is turned on, and if so, turn it on.

5.Please check if the BIOS mode trackpad can be used normally.

You can continuously tap or press and hold F2 when the device is turned on to enter the BIOS interface to check whether the touchpad is working properly, if you still can't use the touchpad to control the screen cursor movement in the BIOS interface, it may involve hardware failure.

6.Please use PC Manager to upgrade the BIOS firmware.

Open HUAWEI PC Manager, touch PC Optimizer > Driver Management (in some HUAWEI PC Manager versions, click Driver Management on the left), and follow the instructions to update the driver.

7.Please check whether the touchpad can be used normally after the F10 one-click restore to factory settings.

Please back up your data in advance, and then press and hold F10 when you turn on the computer and use the system factory reset function to restore the computer to its factory state.

Make an appointment for service. Huawei Customer Service Center.

Repair spare parts** inquiry.

If your Huawei computer's trackpad fails, you can try the following solutions:

1. Check the trackpad resistance switch: Some Huawei computers may have a switch on the trackpad, and you need to check whether the switch is turned off. If yes, you need to turn on the switch.

2. Check the trackpad driver: The trackpad may fail due to driver problems, and you need to check whether the trackpad driver is working properly. You can check the status of your trackpad through your computer's Device Manager and try updating the drivers.

3. Check the trackpad settings: The settings of the trackpad may affect its normal operation, and you need to check whether the trackpad settings are correct. You can set it from the settings screen of your computer.

4. Restart the computer: Try to restart the computer, you can restart it through the computer's menu or directly press the power button.

5. Clean the trackpad: The trackpad may fail due to dust or dirt, and the trackpad needs to be cleaned regularly to ensure its normal operation.

If none of the above methods solve the problem, we recommend that you contact the after-sales service center of your Huawei computer or a professional maintenance personnel for repair.

If your Huawei computer's trackpad is out of order, you can try the following methods to fix the problem:

Restart your computer. Sometimes, a simple reboot can solve some minor problems.

Check your trackpad settings. Open Control Panel, select Mouse, and then check in Device Settings to see if the trackpad is disabled or set up incorrectly.

Clean the trackpad. Sometimes, dust or stains on the trackpad can cause malfunction. You can use a clean cloth or a professional cleaner to clean the trackpad.

Update the drivers. Open Device Manager, find the trackpad driver, right-click and select Update Mega Driver.

Check for hardware failures. If none of the above methods can solve the problem, it may be caused by a branch fault of the hardware family. You can contact Huawei customer service to repair or replace the trackpad.

If your computer supports the touch screen function, the touch screen function of the touch screen is turned on by default. If you have disabled the touch function before, you can enable the touch fiber Sakura touch function of the touch screen by the following methods:

1.Right-click on the Windows icon and select Device Manager.

2.Click the drop-down button for "Ergonomic Vertical Input Device" (or "Human Interface Device"), right-click on "HID-Compliant Touch Screen" (or "HID-Compliant Touch Screen"), and select "Enable Device". Once set, the touch function of the touchscreen will turn on again.

1.The first step is to click the start button in the lower left corner of the desktop, or you can directly press the Windows key on the keyboard.

2.Step 2: Open the Start Menu and click to enter the Control Panel page.

3.Step 3, find and click on the mouse option under the Control Panel.

4.Step 4: Go to the mouse properties page and click on the last device setting in the top option bar.

5.Step 5: Click the Disable button under the Device box on the Device Settings page, and click OK in the confirmation pop-up window.

6.Step 6: Go back to the mouse properties page and click OK to apply settings again.

7.Step 7: Open the touchpad in the same way, open the device settings page, click the enable button at the bottom, and confirm it twice.

1. Turn on your laptop and click on the start icon in the bottom left corner.

2. Click the Settings column in the pop-up system settings menu toolbar.

3. After entering the Windows settings interface, click on the device column.

4. In the device settings menu, click the touchpad bar in the left toolbar.

5. After entering the touchpad interface, click the switch bar below the touchpad.

The specific steps are as follows: 1. Click the start menu; 2. Find the control panel and open it; 3. Click on the Hardware & Sound option in the control panel; 4. After opening the mouse properties window, select the device setting; 5. Then see the following enable, click enable to complete.