Can the Bluetooth headset still be used if it is in water, and what should I do if the Bluetooth hea

If there is no damage to the electronic components, it can be used, put it in a cool, ventilated and dry place, generally placed for 2-3 days to air dry, and turn on to see if it can be used. (If it can't be used, it means that the component has been damaged).

If the earphones themselves are waterproof, it is also recommended to put them in a ventilated, cool and dry place, and air dry them naturally for 1-2 days before turning them on.

Water ingress into the earbuds generally damages the battery, and as long as the battery is straight through and reflowed, it cannot be used again.

Summary: As long as the components are not damaged, as well as the battery, the surface moisture can be used after natural evaporation. Don't believe in any waterproof headphones, the waterproof on the market is only waterproof or sweatproof, and it can't reach the IXP4 level at all.

I tried. If you pick it up right away, you can still use it. There was a murmur though.

Can you still use the Bluetooth headset if it gets into the water, hello dear, if you can still listen to songs, you can still use it. However, be sure to allow the moisture in the earphones to dry before use to avoid short circuits. The following three points should be remembered when the Bluetooth headset enters the water.

1. Remember: Don't turn on the Bluetooth headset immediately if it gets into the water, as long as it is powered on, it will be short-circuited! The bluetooth headset after the circuit is burned can basically be regarded as scrapped, so if your Bluetooth headset gets into the water, you must be cautious and remember to charge it after it is dry. Clause.

2. Blow dry or air dry. After the earbuds are in the water, the first thing is to dry, whether it is dried in the sun or by a hair dryer. After the water of the earbuds is dry, you can connect your mobile phone or computer to see if you can still use them.

If there is no impact on the sound quality, of course it can be used. However, if the sound quality is damaged or the earphones can no longer be heard, it is recommended not to use them again. Clause.

3. Get the after-sales outlets of the Bluetooth headset brand, and let me help detect whether it is maintenance or battery replacement. Or get a place that specializes in selling Bluetooth, and there is a connection with the place where Bluetooth is repaired, and the maintenance cost is cheaper than the brand after-sales outlets, but the quality of the repair is not as good as the brand after-sales. Hope the above helps

Can the bluetooth headset still be used if it gets into the water, hello dear, no. If the Bluetooth headset accidentally comes into contact with liquid, such as the sweat left by you after exercise, or accidentally falls into the water, please wipe the Bluetooth headset with a clean microfiber cloth or absorbent paper, and then put it in a ventilated place to dry the earphones. (Note, do not heat the Bluetooth headset to dry it back, it may cause secondary damage).

After the earphones are in the water, the first thing is, of course, to dry, whether it is dried in the sun or by hair dryer.

Bluetooth headset water treatment method:

1. Hair dryer method: This method can be said to be the most direct and effective, because the size of the Bluetooth headset is small, of course, if the water ingress is also serious, use the hair dryer to blow directly on the machine, usually after a period of time can be repaired, but you need to control the temperature, otherwise it will be deformed.

2. Placement method: After draining the water of the earphones, use a vacuum belt to load the earphones and put them in the rice tank, so that it can be placed for a few days, because there is a dry environment that will condense the water vapor and condense in the vacuum belt.

3. Maintenance method: This method will lose the risk of warranty, it is recommended that the user use direct disassembly and hot air drying after the warranty, of course, you need to pay attention to the loss or damage of this component.

Bluetooth headset common troubleshooting:

1. The sound of the headphones rises by itself when listening to songs.

In this case, most of the things that happen on the Bluetooth sports headphones, although many Bluetooth headsets can be waterproof now, but in fact, they really can't be completely waterproof, just that the sweat left when running can be prevented, so if this case, it can generally be concluded that the microphone wire control position is water, in this case, you can use a hair dryer to blow for about ten minutes, it's OK.

2. The headphone control light flashes and flashes.

There are many problems with this kind of problem, such as beats X, Bose QC30 sometimes this situation will occur, but this situation will be relatively complicated, because this problem will be caused by several situations, the first is the motherboard problem, the second is the battery problem, the third is the chip problem, at this time, the power button + volume button press for 10s, restart the function, if it still doesn't work, it can only be repaired after sale.

If there is no water in the Bluetooth headset, give everyone a convenient and convenient way to use it. It is to directly use a hair dryer to dry the Bluetooth headset, remember to be sure to blow it thoroughly, if it is not dry, the Bluetooth headset is charged is likely to cause a short circuit in the internal circuit of the Bluetooth headset, and the Bluetooth headset after the circuit is burned can basically be regarded as scrapped. Therefore, friends, if your Bluetooth headset gets into the water, you must handle it carefully, and remember to charge it after it is dry.

Hello, put it for a few days, wait for the water to evaporate naturally and then try to turn it on, if it can still be used normally, then it means that there is no problem, if it cannot be used normally, it is broken, and there is no need to study ** broken, because there is no value of maintenance, or a new one.

Bluetooth headsets generally support life waterproof, if your headphones are liquid or waterproof, please do not immediately use the Bluetooth headset after entering the water, and avoid shaking the Bluetooth headset to shake off the water, not to mention using a hair dryer, oven to bake the Bluetooth headset, the above operations may lead to damage to the components of the headset. We recommend that you follow the following steps:

1. If the true wireless Bluetooth earbuds are liquid, it is recommended that you immediately disconnect the earbuds from the mobile phone, place the earbuds separately from the earphone case, wipe the liquid on the surface of the earbuds and place them in a ventilated place to dry naturally.

2. If the neckband earphones are filled with liquid, it is recommended that you immediately disconnect the earphones from the mobile phone, stop using the earphones, wipe the liquid on the surface of the earphones, and place the earphones in a natural ventilation place to dry.

3. If your earphones are soaked in water, they will not be able to be used normally after natural drying. It is recommended that you bring your purchase voucher to the nearest OPPO official service center for processing.

Bluetooth headsets generally support waterproofing, if your headphones have liquid ingress, it is recommended that you can deal with it as follows:

1. If your neckband earphones are filled with liquid, it is recommended that you immediately disconnect the earphones from your mobile phone, stop using the earphones, wipe the liquid on the surface of the earphones, and dry the earphones in a natural ventilation place.

2. If your wireless Bluetooth earbuds are filled with liquid, it is recommended that you immediately disconnect the earphones from your mobile phone, place the earphones separately from the earphone case, wipe the liquid on the surface of the earbuds and place them in a ventilated place to dry naturally;

3. If your earphones are soaked in water, they will not be able to be used normally after natural drying. It is recommended that you bring the relevant purchase voucher to the customer service center for processing.

Note: a. Please do not use the Bluetooth headset immediately after entering the water to avoid short-circuit damage to the internal components caused by the headset after power-on;

b. Please do not try to shake off the moisture by shaking the Bluetooth headset, this operation may cause the liquid to seep into other components;

c. Please do not use a hair dryer or oven to bake the Bluetooth headset, as high temperature and high heat will cause permanent damage to the components.