What is the difference between UV board and PUV board? How to identify UV plates?

UV board UV paint is ultraviolet curing paint, also known as light-initiated coating. Ordinary wood boards, calcium silicate boards and other boards through UV paint, and then through the UV light curing machine drying and the formation of stone boards, with bright surface treatment, bright color, strong visual impact, wear resistance, strong chemical resistance, long service life, no discoloration, easy to clean, high cost of mechanical equipment and process technology requirements, is a more ideal board curing treatment process.

Characteristics of UV plates.

A: High surface smoothness: the mirror highlight effect is obvious.

b: Plump paint film: The color is plump and attractive.

C: Environmental protection and health: Usually the paint board is not baked, and there is a continuous release of toxic substances (VOC), UV board solves the environmental protection problem of the century.

Not only does it not contain volatile substances such as benzene, but it also cures by ultraviolet light to form a dense curing film and reduce the release of substrate gases.

D: No fading: Through comparative experiments, it is proved that the UV veneer has better physical and chemical properties than the traditional board, which ensures that the UV board does not lose color for a long time, and solves the color difference.

E: Scratch resistance: high hardness, the more you grind, the brighter it is, and it is cured at room temperature for a long time without deformation.

Looking for Lu Hong gradually disappeared (monk Jiaoran).

Now is the era of environmental protection, and many decoration building materials also have the role of green and energy-saving. Not only is there little harm to the human body, but the colors are also very rich. In particular, UV sheets are very popular among young decoration owners.

Today, I will talk to you about what material UV board is and what is the difference between UV board and PVC board, hoping to help you to a certain extent.

1. What is the material of UV plate?

1. UV sheet refers to a composite material with surface treatment technology using UV curing technology. UV curing technology is a material surface treatment technology that appeared in the 60s of the 20th century, it has the characteristics of high efficiency, environmental protection, energy saving, high quality, less, etc., and is one of the new technologies of green industry in the 21st century, and the use rate is very wide.

2. The main raw materials of UV board are calcium powder and PVC, the content of calcium powder is relatively high, and the finished product is generally a bit like stone on the surface, but it is actually a synthetic product. Now the more popular integrated UV board is bamboo and wood fiber, the main raw materials are wood powder, calcium powder and PVC, and the finished product has a wood feel.

2. What is the difference between UV board and PVC board.

1. The difference in moisture resistance.

UV board: poor moisture resistance, especially in the humid environment of the kitchen, good moisture resistance is practical, UV cabinet door panel is not clear leakage group has good moisture resistance, then the service life will not be too long.

PVC board: moisture-proof general, PVC compared with UV board, moisture-proof sore-boring can be slightly better, but it is not particularly good, it can only be said to be enough. However, the advantage of PVC is that it will not expand and deform due to heat and moisture, and it has very strong anti-corrosion and anti-moth capabilities, and it is very simple to maintain.

2. The difference between **.

UV board: affordable, mainly affected by factors such as substrate, size specifications, thickness, color, brand, etc., according to the specifications of the commonly used size 2440 1220, usually its price is 240-420 yuan, or more humane.

PVC board: PVC film manufacturing cost is high, generally speaking, it only covers the front and side, the back is usually made of triamine leather, the overall shape is not good, the surface is relatively fragile, afraid of cigarette butts and sharp scratches. The quality of PVC board is also very different from its classification, so the ** of PVC board will also be different.

Therefore, when users buy PVC boards, they should consider what kind of PVC boards to use, whether the quality of PVC boards and the material meet the standards.

The above is the relevant information about what is the material of UV board and what is the difference between UV board and PVC board, I hope it will be helpful to you.

Summary. Hello dear! I'm asking Mr. Liu:

What is the difference between PET door panel and UV door panel?

1. The production methods of the two are different. The PET door panel is made of PET material, which is printed on the surface of the board and then pressed with a layer of PET film, which is transparent and colorless. The UV board is a kind of decorative plate formed by UV coating on the surface of the board and cured by ultraviolet light.

2. The performance characteristics are different. The overall hardness of PET plate is relatively high, which can bring high toughness and stable size, so it is more suitable for the decoration of the surface of the plate, and the scratch resistance is better, mainly due to its relatively high hardness and not easy to collapse in the process of cutting. However, if the quality of the adhesive selected is not good, the surface of the material is prone to bulging.

3. The environmental protection performance of UV plate is more prominent, and its surface hardness can generally reach about 3h, so the hardness is relatively high, but it is not suitable as a customized board for the whole house, mainly because the hardness is too high, and it is easy to collapse in the production process.

4. Compared with **, both are a kind of plate, but PET is higher than UV**, if calculated according to one, it can be about dozens of yuan higher.

What is the difference between UV board and PET board.

Hello dear! I am asking Mr. Liu: What are the differences between PET door panels and UV door panels 1. The production methods of the two are different.

The PET door panel is made of PET material, which is printed on the surface of the board and then pressed with a layer of PET film, which is transparent and colorless. The UV board is a kind of decorative plate formed by UV coating on the surface of the board and cured by ultraviolet light. 2. The performance characteristics are different.

The overall hardness of PET plate is relatively high, which can bring high toughness and stable size, so it is more suitable for the decoration of the surface of the board, and the scratch resistance is better, mainly due to its high hardness and not easy to collapse in the process of cutting. However, if the quality of the adhesive selected is not good, the surface of the material is prone to bulging. 3. The environmental protection performance of UV plate is more prominent, and its surface hardness can generally reach about 3h in Weishi Hall, so the hardness is relatively high, but it is not very suitable as a customized plate for the whole house, mainly because the hardness is too high, and it is easy to collapse in the production process.

4. Compared with **, both are a kind of plate, but PET is higher than UV**, if calculated according to one, it can probably be higher than dozens of return elements.

Hello, brother Min Oak because I saw that you rated my last time I didn't take Kai, I am very concerned about your experience. If you are satisfied with my service, I hope you can give a thumbs up! If there is a problem, I am always waiting for you.

I wish you a happy life and a happy life!

<>1. Differences in appearance. The bottom of the embryo at the side end of the UV plate is layered, while the side end of the rock plate is not layered in any way, and it is a whole.

2. The difference in feel. The surface of the UV board is very smooth and comfortable to the touch. The surface of the rock slab has obvious particles, which are very textured to the touch.

3. Differences in materials. The embryo low of the UV plate is ceramic. The rock slab has the advantage of containing natural rock, and it is not afraid of open flames, and it is a lead rubber that can be used with confidence.

How to buy UV board is more reasonable.

1. In the process of choosing UV boards, it is necessary to know how to identify the substrate. If the base material is good, the linearity is not easy to deform even if it is used for a long time, and the surface is very smooth and flat. The general yarn of UV board is particleboard or high-density MDF, which belongs to E1 grade environmental protection materials.

2. It is also very important to see whether the UV board can bring better after-sales service, so it is necessary to choose the cooperation of large brand companies, and the service will be more thoughtful, so as to avoid the situation that small manufacturers run away in the later stage.

3. When choosing a UV board, you also need to look at Huai Suiqi, try to shop around for three to five, see which one is good for the quality of the material to be replaced, and give the best of the best, and then make a choice. The selection of materials must not be greedy for trouble, otherwise it will be very troublesome in the later stage.

4. The brightness, flatness and color of the surface of the UV board are relatively good, which can be directly identified. Moreover, the strength of the UV board is relatively high, and it is not easy to be scratched, so you can use the key to test the hardness a little to see if its quality is good or bad.

Summary: What is the difference between UV board and rock plate, and how to buy UV board more reasonably, I will introduce it here first, do you understand it? UV board and rock slab are different, and they need to be clearly distinguished in advance, so as to facilitate the selection and use in the later stage, so as to avoid the occurrence of various troubles.

UV board is a plate whose surface is protected by UV treatment. UV board is a board formed by adding UV paint to the surface of ordinary wood boards, and then drying by UV light curing machine, which has the advantages of smooth surface, bright color, high wear resistance, non-toxic and environmental protection, good moisture resistance, and not easy to deform. These characteristics make the UV board have a long service life and high practical value.

The UV plate adds UV paint to the outside. That is, UV-curable coatings, also known as light-initiated coatings. The primer is made of solvent-free 4e green high-grade paint, which is non-volatile, non-toxic and environmentally friendly; After curing, it has a high-gloss antibacterial effect.

Usually the paint is not good, and volatile substances (VOCs) are constantly released.

UV boards, formed by applying UV paint from the boards, like some particleboard and MDF, and then drying them with a UV curing machine. Due to the ease of processing, industrial production can be realized. UV boards have a long service life and high requirements for mechanical equipment and process technology.

It also has the property of resisting moisture and deformation, making it an ideal decorative board.

UV paint is ultraviolet curing paint, also known as light-initiated coating. Ordinary wood boards, calcium silicate boards and other boards through UV paint, and then through the UV light curing machine drying and the formation of stone boards, with bright surface treatment, bright color, strong visual impact, wear resistance, strong chemical resistance, long service life, no discoloration, easy to clean, high cost of mechanical equipment and process technology requirements, is a more ideal board curing treatment process. The substrate is shavings living MDF, which is made of polymer polymer paint and additives through microwave drying, ultraviolet curing, and successively through 4 processes.

As a new type of board, Hebei wall advertising, UV board is currently one of the most advanced and environmentally friendly boards in the world, similar in appearance to traditional paint boards, but more flat and bright, with a reflectivity of more than 90%. The surface of the UV board is sprayed with 5 UV light-curing paints, which are quickly cured and formed into an oxide protective film in a few seconds in a low-temperature environment under ultraviolet irradiation, and the special process creates the superior quality of the UV board. The UV plate can ensure that there will be no color difference and fading problem within ten years, and the surface hardness is up to 4h, which is not easy to scratch.

UV light-curing paint is stable in nature, does not contain volatile compounds, is non-toxic and odorless, and is a paint that meets the European E1 environmental protection standard. UV board is made in batches of whole boards, used to make cabinet door panels need to be cut into a monolithic door panel of specified size, after cutting, the four sides of the door panel are the natural color of the substrate (not UV paint treatment), so alternative materials are needed for edge banding, such as PVC, aluminum edge banding, etc., compared with the surface scratch resistance such as paint, UV cabinet door panel has the color of the paint door, the brightness of the crystal door panel, and the hardness of the double veneer panel, which is an excellent choice for the cabinet door.

Is this talking about building materials boards? UV board refers to the paint film on the board is UV paint varnished, and there are other varnishes, such as ordinary paint brushed and self-dried or baked after brushing, as well as film. The UV board is wear-resistant, acid-alkali washable, the ordinary paint is full, and the pattern of the film is rich.

When it comes to what is the UV board, I believe there are many friends who don't know how to understand it, in fact, the UV board is also a decorative material, and it is used very frequently in the process of decorationWhat is a UV boardFirst, what exactly is a UV board.

In fact, UV is the surface of the board after UV treatment and protection of the plate, the characteristics of the UV board is that the color is bright, the wear resistance is good, the chemical resistance is strong, so that the sail book with a long life, no discoloration, easy to clean so many advantages are enough to prove that the UV board is worthy of our trust.

Second, what are the UV board manufacturers?

1. Shijiazhuang Hongbai Building Materials Sales **** is a company specializing in the production and processing of PVC lines, imitation marble slabs, decorative lines, paint-free wood lines and other products, with a complete and scientific quality management system. Shijiazhuang Hongbai building materials sales **** integrity, strength and product quality have been recognized by consumers.

2. Linyi Lanshan Fubao Wood Plastic Products Factory is a collection of woodworking boards, multi-layer boards, gypsum boards, paint-free boards, decorative panels, imitation marble UV boards, flooring, ecological wood Great Wall boards, ecological wood ceilings, service in one of the manufacturers, with a complete and scientific quality management system. The integrity, strength and product quality of Fubao WPC Products Factory in Lanshan District, Linyi City have won the hearts of many consumers.

3. Linyi Lanshan District Ye Zhiyuan Decoration Materials is a collection of production, processing and sales as one of the PVC decoration materials factory, the main production of PVC lines, and bamboo fiber integrated wall panels, customizable pipe corner protection, the company has 11 production lines, the introduction of advanced equipment at home and abroad, the employment of high-end technical personnel, improve efficiency, reduce costs. So his strength is quite strong.

4. Linyi Lanshan District Rio Tinto Decoration Materials Factory is a professional manufacturer of building decoration materials such as UV boards, integrated wall panels, Great Wall boards, etc., with many years of experience in the development and production of posture holes, and has a perfect and scientific quality management system. The strength of Rio Tinto Decoration Materials Factory in Lanshan District, Linyi City is something we should not underestimate.

5. Founded in 2006, Santong Aluminum, located in Foshan, Guangdong Province and Zhengding, a famous historical and cultural city in Hebei Province, echoes the north and south, and has established a sales network and service system covering the whole country. So his strength is quite powerful.

What exactly is a UV board, what are the UV board manufacturers, it will be introduced to you here, I hope that after reading the above article, it can be helpful to friends, so you will be very happy.