How to use Samsung drum washing machine WF R853 How to choose specific parameters

Here's how to use it:

Before using a fully automatic washing machine, check whether there are hairpins, coins and other items in the clothes that need to be washed, and if so, you need to take them all out.

Plug in the washing machine, connect the drain and put the laundry in the washing machine.

Add laundry detergent or detergent after putting the clothes in, and the amount of laundry detergent depends on the amount of laundry and the degree of dirt. Add laundry detergent and pour it directly into the washing machine, or pour it into the washing machine's own laundry detergent box, then turn on the faucet and close the lid.

Press the power switch of the washing machine, choose the washing method of the washing machine, the washing method of different washing machines is slightly different, you can choose the water level according to the number of clothes, and choose the corresponding program according to the specific material of the clothes.

After selecting the program, press the "Start Pause" button of the washing machine, and the washing machine will start working.

Some washing machines have a reservation function, and after making preparations, the washing machine will automatically start working at the set time.

When the selected laundry program is complete, the washing machine beeps to indicate that the laundry is complete.

After the washing machine is finished, turn off the power of the washing machine, unplug the power plug of the washing machine, turn off the faucet, open the cover, take out the laundry, clean the barrel of the washing machine, and wipe the washing machine dry.

It's not a fault, this phenomenon means that the drain pipe is too low, because the Samsung washing machine is the upper drain principle, and the drain pipe needs to be hung 60-90 cm from the ground. There is a hook in the middle of the back of the case, after the drain comes out from underneath. Hanging on this clip, the water that enters the bucket will not be automatically discharged, and the water will be stored in the bucket before the machine can run.

Summary. Hello dear, Samsung washing machine WD+87542+DA adopts nanotechnology, the production and development of nano materials can effectively kill the bacteria in the washing machine, Samsung has solved the bacteria remaining in the washing machine, and ensured people's health. The improved roller protection clothing can effectively reduce the winding by more than 35%, reduce wear and tear and protect the clothing.

Certified by the China Household Electrical Appliances Research Institute, Samsung's bubble net wash mode can save more than 70% of energy compared to the standard wash mode, saving 29 minutes in a single wash time.

Hello dear, Samsung washing machine WD+87542+DA adopts the technology of burning rice, and the nano materials produced and developed can effectively kill the bacteria in the washing machine. The improved roller protection clothing can effectively reduce the winding by more than 35%, reduce wear and tear and protect the clothing. Certified by the China Household Electrical Appliances Research Institute, the Samsung Bubble Net Mold Orange Washing Mode can save more than 70% of energy compared with the standard washing mode, and can save 29 minutes in a single washing time.

Hello. The washing machine is noisy and shaky.

The reasons for the loud noise and shaking of the washing machine are: 1. The unbalanced placement of clothes will lead to uneven stress on the washing machine, resulting in the sound of the inner bucket hitting the side of the washing machine. You can place the cloth and reed this cavity flat, and the washing machine can be spun dry normally.

2. The motor bearing is damaged, and the bucket will hit the inner wall when washing clothes, and the motor bearing needs to be replaced. 3. The screws of the washing machine are loose, and the screws will be loosened due to the use of the washing machine for a long time, so you need to disassemble the washing machine, find the loose place, and tighten the loose screws. 4. If there is a problem with the starting capacitor, there will be an abnormal sound when the clothes are dried, and if the capacitor is broken, replace the new capacitor.

5. The imbalance of the washing machine can be measured with a balance ruler, and the washing machine can be placed in a balance, which can be adjusted by professionals.

Hello dear Samsung users:

If the front-loading washing machine shows 5e, here's how to fix it:

1.Check that the drain is placed in the correct position.

Samsung drum washing machine, with an upper drain design, the drain pipe should be hung in a clip above the back of the washing machine, with a highest point fixed between 60-90cm from the ground.

2.The weather is too cold and there is no heating equipment that may cause the drain to freeze, you can:

1) Move the washing machine to a room with a relatively high temperature and wait for the ice in the drain to melt before trying again.

2) Soak the drain in hot water.

3.It is recommended to clean the residue filter of the washing machine 5-6 times a year, if it is not cleaned for a long time, the machine will not be able to drain properly, please follow the steps below to clean the residue filter:

1) Unplug the washing machine.

2) Insert it into the seam of the baffle at the bottom of the washing machine and pry it upwards.

3) Unscrew the residue filter to the left.

Samsung knows that we will provide you with high-quality solutions and answer your questions attentively, and hope to get your satisfactory evaluation.

How to use Samsung WFR853 automatic front-loading washing machine:

For the installation of the drum washing machine, place the washing machine on a solid and flat ground, adjust and install it, connect the water inlet hose with the faucet and the water injection port of the washing machine, and open the faucet, put down the drain pipe, and insert the drain pipe mouth into the floor drain hole; If it is a drainage structure, hang the drainage pipe on the edge of the pool.

Plug in the power plug, press the power button, and turn on the power of the washing machine.

Add detergent to the washing machine detergent container and gold spinning or clothing softener to the washing machine laundry softener container.

Place the laundry that needs to be washed in the washing machine drum and close the washing machine door. Set the laundry selection and set the laundry program.

Depending on the amount of dehydrated laundry to be washed, select the high, medium, and low water levels set the water level switch.

Press the start pause button of the washing machine to start the washing machine, and the water inlet solenoid valve is turned on and the water inlet starts (at the same time, flush the detergent that was placed in the detergent container box into the machine).

When the water injection reaches the predetermined water level, the water level switch contact is turned on, and the computer controller sends a command to close the solenoid water inlet valve at this time, and the washing machine starts to run automatically (washing--- rinsing--- dehydration is completed).

At the end of the entire laundry washing program, the washing machine automatically shuts down after the beep is announced.

It is recommended to read the instruction manual again before use.

Fully automatic washing machines do not automatically turn to spin dry:

Cause of failure: 1. The water level switch is broken. 2. The line is off. 3. The air bag of the water level switch is blocked.

Treatment: 1. Change the water level switch. 2. Connect the wire. 3. Clean up the airbag blockage.

The automatic washing machine should be transferred to the dehydration program after washing and draining, and if it cannot be shaken dry, it can be checked from the following aspects.

1) Whether the laundry is seriously biased to the side of the dehydration bucket, or the laundry is placed too much and the dehydration bucket does not work.

2) The plug of the closing door switch is not in good contact, and whether the connectors and wires are normal.

3) Check whether there is any foreign object between the dehydration bucket and the water bucket.

4) If the V-belt is too loose or falls off, the belt can be adjusted or replaced.

5) The large oil seal is not installed properly and jams the dehydration shaft. (Generally, it is easy to occur after replacing the large oil seal during maintenance) 6) The brake belt is not loosened.

7) Program control board failure.

There is a good chance that the drain motor is broken.

According to the situation you described, the washing machine shows that the of is a spill fault. Placing too much laundry detergent will cause too much foam during the washing process, so it will cause the washing machine to overflow, please reduce the amount of laundry detergent.

If the amount of laundry detergent is not too much, please turn off the power of the washing machine for 10 minutes and then restart the test machine