Samsung washing machine broken solve 20

Answer: When the transmission belt slips or falls off, the torque of the motor transfer cannot be transmitted to the running parts, which will cause the drum to not rotate. At this time, you can use the screw screw to unscrew the strong screws on the back cover of the washing machine, remove the back cover, and check whether the V-belt is worn or falling off; If so, the transmission belt needs to be replaced, or the motor position needs to be adjusted to make the tightness of the transmission belt suitable for use.

It is also possible that the capacitor is damaged The washing machine uses a capacitive motor, and when the capacitor is short-circuited, open-circuited, grounded and aged, the motor cannot start and run normally. In this case, replace the capacitor with a new capacitor of the same size, and the motor will start running normally.

5. When the motor starting winding is broken, it will cause the motor to have a "buzzing" sound, but it cannot start normally, at this time, it is necessary to repair or replace the new motor.

6. Check whether the drum is stuck by foreign objects, and if so, remove it. If the drum washing machine runs slowly and cannot reach the rated speed, it can also be overhauled according to the above methods.

When the power is normal, press [Start Pause] or [Start Pause] to confirm whether water can enter. If there is no water, check whether the faucet is open, whether the water is stopped at home, whether the water flow is small, you can turn the faucet to the maximum, or contact the property to check the water pressure.

First, when the washing machine is washing clothes, if the motor has a humming sound, but the shed does not rotate early, it may be a problem with the starting capacitor. If there is no sound from the motor, it may be that the lid linkage switch of the dehydration bucket is faulty. Second, check whether the belt is loose, check the pawls and clutch, and chain the bird to see if the brakes are tight or whether the mechanism plate on the drum cover is broken.

Third, the automatic washing machine does not rotate, some motors with clutches are very hot, and the starting capacitor may be broken, or the wire head falls off and the motor cannot be started. If there is no clutch, see if the motor is stuck, do not idle the belt under the motor experiment, whether it is stuck, if it is not stuck, most of the starting capacitors are problematic.

Summary. If your Samsung washing machine is not working, it is recommended that you:

1.Check whether the power supply is normal, and try to replace it with another outlet.

2.Check to see if the operation method is correct. Turn on [Power] - [Start Pause].

3.Check whether the reservation function is enabled, after the reservation function is enabled, the washing machine can only work until the specified time is reached. It is recommended to turn off the [Power] and turn the [Power] back on to cancel the reservation.

4.Check whether there are any error messages on the machine display, which can be checked according to the manual.

5.Test whether the empty aircraft is operating normally.

What's going on with the Samsung washing machine not turning.

If the Samsung washing machine is not running, it is recommended that you: Dou Bang 1Check whether the power supply is normal, and try to replace it with another outlet.

2.Check if the operation method is correct. Turn on [Power] - [Start Pause].

3.Check the sky to see if the reservation function is turned on, after the reservation function is turned on, the washing machine can only work until the specified time is reached. It is recommended to turn off the [Power] and turn the [Power] back on to cancel the reservation.

4.Check whether there are any error messages on the machine display, which can be checked according to the manual. 5.

Test whether the empty aircraft is operating normally.

There are many reasons why the washing machine won't turn. 1. The grid voltage is too low 2, too much washing is placed 3, the transmission belt is slipped or falls off 4, the capacitor is damaged 5, the motor starting winding is broken 6, the drum is stuck by foreign objects Check whether the drum is stuck by foreign objects, it is recommended that you still imitate the nuclear very professional maintenance master I will help you repair the wild, so it is more convenient to prepare for mountain digging.

Hope it helps.

Hello friend<>

Check whether the power plug is plugged in tightly, whether the power switch is turned on, whether the socket has electricity, etc. 2.Water Leakage:

Check faucets, pipes, valves, washing machine inlets, etc. for leaks. At the same time, check whether the door seal of the washing machine is intact, whether it is damaged or aged, etc. 3.

The washing machine does not drain water: check if the drain pipe is blocked, if the drain pump is faulty, etc. 4.

The washing machine does not work or stops running**Check whether the motor, drive belt, sensor, etc. are faulty and need to be replaced or repaired. 5.

There is an error in the washing machine**Carrying the stove draft: Eliminate the corresponding fault according to the washing machine's manual or error table. If you are unable to solve the fault, it is recommended to contact a professional repair service provider or Samsung customer service for repair.

Samsung washing machines are one of the world's well-known electrical appliance brands, with the characteristics of durability, efficiency and large capacity, which are favored by users. However, there will inevitably be some malfunction problems when using the washing machine, such as the washing machine not starting, the washing machine draining poorly, and the washing machine working abnormally. Let's take a look at the common faults and solutions of Samsung washing machines.

1. The washing machine cannot be started or sleepy.

This can happen because of a power failure, such as a loose plug or a power supply disconnection. The solution is to check that the plug is plugged in tightly and that the power cord is damaged; In addition, the fault can be troubleshot by replacing the mounting socket and extension cord.

Second, the washing machine does not drain well.

When the water doesn't come out, it's likely that the drain is blocked. The solution is to disassemble the drain first, check whether there is any foreign object inside the pipe, and if so, you can use pliers to remove the foreign object. If the problem still does not work, then it is recommended to find a professional to deal with it.

3. The washing machine is leaking.

Sometimes there is too much water inside the washing machine, or the machine is not sealed enough, and it is easy to leak. The solution is to first check whether the drain pipe of the washing machine is correctly connected or damaged; Secondly, check the tightness of the washing machine door to ensure that there is no water leakage at the door; Finally, if none of the above methods can solve the problem, it is recommended to contact the maintenance personnel for treatment.

Fourth, the washing machine is working abnormally.

The washing machine may have abnormal conditions, such as incomplete laundry, excessive noise of the washing machine, etc. The solution is to first check the inside of the washing machine for foreign objects, such as clothing, hair, etc., which can cause the washing machine to run unbalanced, resulting in abnormal conditions. In addition, you can also check whether the washing machine needs to be replaced, and if so, you need to find a professional to deal with it.

In short, Samsung washing machine failures are also relatively common, and users need to carefully check the instruction manual when using the washing machine to avoid failure caused by improper operation. If there is a failure, it can be dealt with according to the above solutions, and you can also choose to contact the manufacturer's after-sales service or professional maintenance personnel for maintenance.

Summary. Hello dear, I'm glad to answer for you! Kiss the washing machine does not start:

First, make sure the washing machine is plugged in or confirm that the power supply is available, and second, make sure that the washing machine is closed. The washing machine is not dehydrated or dehydrated sufficiently: manual sorting of large pieces of clothing in the drum; Add one or two towels to a single piece of laundry.

The washing machine door cannot be opened: please power on again and press the power button to turn it on, then press the power button to turn it off, then turn it on again and the washing machine will automatically unlock later.

Some problems with Samsung washing machines.

Hello dear, I'm glad to answer for you! Kiss the washing machine does not start: first make sure the washing machine is plugged in or confirm that the power supply is available, and second, make sure that the washing machine is closed.

The washing machine is not dehydrated or dehydrated sufficiently: manual sorting of large pieces of clothing in the drum; Add one or two towels to a single piece of laundry. The washing machine door won't open:

Please power on again first, press the power button to turn on, then press the power button to power off, and then turn on again and the washing machine will automatically unlock later.

Kiss* personalized washing, the amount of laundry selection function adjusts the water level and washing time according to the amount of laundry. Coupled with the function of separate washing, separate rinsing, separate drainage, and separate dehydration divided into four, all can be operated separately, giving users more free choice space After the dehydration is completed, the machine will rotate back and forth at a lower speed, through the ** in the tube, the clothes gradually stretch the folds and restore calm, which has the effect of anti-wrinkle and ironing, and the anti-wrinkle function can prevent the clothes from getting knotted, reducing the degree of damage to the clothes, and it is also convenient for the active enzymes in the laundry detergent to be most active at a water temperature of 40 degrees. Active enzyme washing keeps the water temperature at 40 degrees for 10 minutes, so that the laundry detergent can fully act on the clothing fibers, so that stubborn stains can easily get out of the clothing fiber operation panel under the warm reminder of the door lock light, just press the pause button.

Which key is to wash the down jacket.

Kiss wool wash.

Samsung drum washing machine malfunction**:ed: Door is not closed Check if the door is open.

E1: Abnormal water ingress. e2：

Abnormal drainage. E4: Washing abnormality.

E9: The drainage location is abnormal. 1e：

If the inverter board fails, the protection is usually in the water level sensor, safety switch and motor speed sensor, etc., that is, at the output of the cable at the bottom right of the inverter board. 3e: Generally it is a problem with the compressor line.

4e: Filter screen problem, cleaning the inlet water filter screen can eliminate this fault. de：

Door switch failure le: water leakage fault Check whether the washing bucket is leaking, check whether the water level frequency loop is normal, and whether the water level sensor is normal. e1：

The water level sensor is faulty. 1e: The water level sensor is faulty.

4e: Water inlet failure (no water supply for 20 minutes) 5e: Drainage failure.

7e: water ingress failure (no obvious effect within 60 minutes) 3e, 8e: excessive current or excessive load during laundry.

9e: The supply voltage is too high or too low. e：

Drain failure (the water level cannot be lowered to reset after 6 minutes) CE: Drain failure (the water temperature is higher than the safe drain temperature) DE: Flip cover failure (the door is not closed when dehydrating) UE:

Imbalance failure (imbalance of clothing during dehydration).