What to do if Samsung drum washing machine won t start?

1. Analysis of the reasons why the automatic washing machine does not start.

l. Whether the socket meets the requirements and whether the contact is good.

2. Whether the door is closed tightly, and whether the micro-delay switch is in good contact.

3. Poor contact of motor plug-in wire or bad motor.

4. Whether you have clicked the start button (the light has been lit after the start pause button is started), and there is a beep prompt.

5. Whether the faucet is turned on.

2. The automatic washing machine does not start the release method.

1. Check the plug and socket of the power supply motor drum to make it in good contact.

After pressing the power switch, does the light on the display panel turn on?

If it doesn't light up--- see if the power plug has electricity, try to change a power strip, if you rule out the power supply problem, it is estimated that there is a problem with the washing machine control board, replace the main control board.

Press the start button --- turn on to see if the water level indicator or water filling indicator flashes?

Do not flash--- the electric control board is broken, replace; Flash, is there a buzzing sound?

Audible --- 1Check the water pipes for water? 2.Is the filter screen at the solenoid valve dirty?

Silent --- 1Check whether there is power supply to the solenoid valve? 2.Check the computer board.

2. Check whether the micro-delay switch is good when powered on, if it is good, it is a contact problem, and the plug-in wire should be clamped.

3. Clamp the motor and plug in the wire or replace the motor.

4. Press the Start pause button again.

5. Turn on the faucet and re-select the program to start.

What should I do if the Samsung common washing machine doesn't start, I think you can reset it.

The failure to start should be a problem with the power on, and it needs to be checked from the circuit

1. First of all, take a look at the socket of your own homeSocketsthe availability of electricity;

2. Secondly, check whether the plug of the washing machine is successfully connected to the power supply, whether there is any loose falling off and poor contact;

3. Again, check whether the power supply line of the washing machine is damaged or broken;

4. Finally, if the above inspections do not find any problems, then the fault is inside the washing machine, and the machine needs to be overhauled in depth.

How to check the washing machine:

1. Use other equipment to try whether the socket used in the washing machine has electricity, if the equipment cannot be started, it means that the washing machine line is fine, it is the power socket.

There is no electricity. 2. Unplug the power plug and plug it back in to feel whether it is stable and whether there is a feeling of looseness and shaking, because the loosening between the plug and the socket will lead to poor contact, so that the washing machine cannot get the power supply.

3. Press the power button on the operation panel of the washing machine, and then press the start button to start and pause, and see if it is a fault of a key or other problems.

4. If after their own preliminary inspection, no problem is found, then the cause of the fault is not something that ordinary laymen can handle, do not disassemble the machine casually, contact the washing machine manufacturer directly for repair, and ask the technician to do further inspection.

Hello: The reason why the Samsung drum washing machine did not respond after it was started: 1. The power cord of the washing machine was not in good contact and the circuit was not connected, so it could not be started; 2. The circuit board of the washing machine has a quality failure, so it cannot be started; 3. The switch button of the washing machine is damaged, so it cannot be operated to start the laundry; 4. The family Senrangming circuit is in a power-off state, and the washing machine cannot be connected to the power supply, so it cannot be started.

Solution: 1. Check the connection status of the power cord of the washing machine and connect the stable power cord; 2. Go to the after-sales service center to replace the circuit board of the washing machine; 3. Ask professionals to repair the switch button of the washing machine; 4. Check the status of the home circuit and ask a professional to repair the circuit. Notice.

Summary. Hello, there are several possibilities according to the problem.

1: The motor is burned out, replace the motor.

2: The key is damaged - replace the key.

3: No power - check the power supply.

4: Contact adhesion - replace the switch.

5: Computer board failure - check or replace the computer board.

The Samsung drum washing machine did not respond after starting.

Hello, according to the problem, there are the following possibilities: 1: the motor is burned out, replace the motor. 2：

The keys are damaged – replace them. 3: No power - check the power supply.

4: Contact adhesion - replace the switch. 5：

Computer board failure - inspection or source attack refers to the crack to replace the computer only loose board.

It shows that everything is fine, but it just doesn't work.

The normal display does not rule out that the keys are broken or the contacts are sticky, and it is recommended to find a maintenance point for maintenance if you are not sure of this.

Sometimes work after a while.

Is it overweight to pack too many clothes?

Possible reasons: 1. The power cord of the washing machine is not in good contact and the circuit is not connected, so it cannot be started;

2. The circuit board of the washing machine has a quality failure, so it cannot be started;

3. The switch button of the washing machine is damaged, so it cannot be operated to start the laundry;

4. The home circuit is in a state of power-off, the washing machine cannot be connected to the power supply, and the spring is not started.

Solution: 1. Check the connection status of the power cord of the washing machine and connect the stable power cord;

2. Go to the after-sales service center to replace the circuit board of the washing machine;

3. Ask professionals to repair the switch button of the washing machine;

4. Check the status of the home circuit, and ask a professional to repair the circuit.

Possible reasons: 1. The power cord of the washing machine is not in good contact and the circuit is not connected, so it cannot be started;

2. The circuit board of the washing machine has a quality failure, so it cannot be started;

3. The switch button of the washing machine is damaged, so there is no suspicion of difficulty in operating the laundry;

4. The home circuit is in a power-off state, and the washing machine cannot be connected to the power supply, so it cannot be started.

Solution: 1. Check the connection status of the power cord of the washing machine and connect the stable power cord;

2. Go to the after-sales service center to replace the circuit board of the washing machine;

3. Please bring professional repairs to the switch button of the washing machine;

4. Check the status of the home circuit, and ask a professional defender to repair the circuit after the old one.

The Samsung drum washing machine does not respond to Hello after starting, and the possible reasons are: 1. The power cord of the washing machine is not in good contact and the circuit is not connected, so it cannot be started; 2. The circuit board of the washing machine has a quality Li core failure, so it cannot be started; 3. The switch button of the washing machine is damaged, so it cannot be operated to start the laundry; 4. The home circuit is in a power-off state, and the washing machine cannot be connected to the power supply, so it cannot be started. Workaround:

1. Check the connection status of the power cord of the washing machine and connect the stable power cord; 2. Go to the after-sales service center to replace the circuit board of the washing machine; 3. Ask professionals to repair the switch button of the washing machine; 4. Check the status of the home circuit, ask professionals to repair the circuit, so that I hope it can help you, I wish you a happy life and good health!

Hello dear, the Samsung drum washing machine did not respond after starting: whether the socket meets the requirements and whether the contact is good. Plug in other power sockets for test purposes, or plug other electrical appliances into the washing machine socket to check whether the socket is normal.

Whether the door is closed tightly, and whether the micro-delay switch is in good contact; Poor contact of motor plug-in wire or bad motor; Whether the start button is clicked and there is a beep prompt; Whether the faucet is turned on or not. The automatic washing machine does not start the release method: 1. Check the plug and socket of the power supply motor drum to make it in good contact 2. After pressing the power switch, the light on the display panel is not on

If you don't light up--- see if the power plug has electricity, try to change a power strip, if you rule out the power supply problem, it is estimated that the washing machine has a problem with the electric control board, and it is more Li to sell the main control board. If the washing machine display shows "DE", "DC", "DE1", "DE2", "DOOR". Here's how to fix it:

1. The washing machine only needs to close the upper cover, and the machine will automatically return to normal. 2. Open the door of the drum washing machine and check whether the clothes are evenly placed in the inner cylinder to avoid clothes being caught in the cracks of the door; Confirm that the door is tightly closed, and try the machine again.