How the Samsung 4521F receives faxes

The procedure for receiving a fax is as follows:

You can press *9* to give the other party a signal to receive the operation through the external ** machine (if it is a machine panel operation, press start, press 2 to confirm).

Note: The line connection of this machine is the main line of the bureau and needs to be connected to the line interface, and the external extension is connected through the ext interface The line connection requirements need to be directly connected by a single line (such as: broadband, IP** box, distribution box or group**, etc., if these devices are connected, the signal stability of sending and receiving faxes will be affected).

Fax function has become an indispensable assistant in the office, if you want to send and receive faxes through the machine, follow the instructions below:

The procedure for sending a fax is as follows:

1.First of all, connect the all-in-one machine to the ** line (the entrance line is connected to the line, and the extension is connected to ext). Make sure the machine is powered on, and place the text side of the document you want to send up on top of the machine's ADF document feeder (or place the single-page document face down on the document scanning glass).

2.After the original manuscript is placed, dial the fax machine number of the other party with the external ** machine, and the other party's machine will give signal transmission after dialing, after hearing the signal tone, press the start on the machine panel and then press 1 and then press to confirm, wait for the signal to be given, and finally hang up ** and wait for sending. (If you use hands-free to dial, you don't need to press 1 and confirm, you can press start directly after hearing the other party's signal tone, but the premise is that the other party's machine must be in automatic signal mode, because this machine is hands-free and does not have a call function).

The other party calls you ** to signal press your start button and hang up**.

There are several modes:

1. Automatically receive in fax mode.

2. Receive manually in ** mode.

3. Automatically receive in the answering fax mode.

4. Use the extension ** to receive manually.

5. Use DRPD mode to receive faxes.

1. Fax connection method: enter the **line socket behind the printer (line), and then connect a connection in the other jack (ext), put the paper to be sent face up on it, dial the ** number, press the confirmation key after receiving the signal, and then press the 1 button.

2. There are manual reception and automatic reception of fax.

Press the "Menu" button until the display displays "Fax Settings".

Press the scroll button (triangle to the right) until the Receive Mode is displayed, and you can choose to set it to Auto Receive, Ring Answer, and ** mode.

It is recommended to select "Ring Answer" and set the number of times the machine rings before answering the call (1 to 7 times), so that it can be listened to manually, and when no one answers after 7 times, it will switch to automatically receiving faxes.

3. Manual answering method: After answering, press "9*" on the top of the fax and hang up.

Hello dear<>

Samsung 4321 how to fax, the answer is as follows: Samsung 4321 multi-function printer is a set of printing, copying, scanning and fax in one of the device, its fax function contains three steps:1

Prepare the document to be faxed: Place the document you want to fax on the document tray on the printer or open the scanpad, and then press the Scan button. 2.

Set fax parameters: Select the "Fax" function on the operation panel to enter the fax settings page, and select the fax number and fax type, file format, fax resolution, fax transmission speed and other parameters of the receiver. 3.

Send a fax: Send the fax document to the ADF (Document Feed) and press the "Send Delivery" button to start the fax. You can also directly enter the fax number and press the "Send" button to send the fax.

Please note that using the fax function requires the correct fax number and fax opening properties to be set on the device to ensure that the fax can be sent properly.