How to set the new document in office07 is the 03 format

1.Change the default new format: Open the registry, the "hkey classes root" key and find "."

docx", right-click on the item and select "Rename" to change it to "doc", so that when you right-click to create a new word document, a new doc format document will be created instead of docx.

2.The second easy way: change the default save format:

Click the "Office Button" in the upper left corner of Word 2007, click the "Word Options" button in the menu to open "Word Options", then open the "Save" tab, and set the "Save File in this Format" drop-down list to "Word 97-2003 Document (.)doc)", which will be saved in doc format by default.

Method 1: Windows Registry Editor Versionhkey Classes Rootdoc\nullfile"=""

The above ** can be saved as *reg file.

Method 2: Click Start-> Run, enter regedit, and press Enter.

Add the Microsoft Office Word 97 - 2003 Document item:

Find the branch [hkey classes root.]doc , under which the string nullfile is created with an empty assignment.

1. Open Excel to create a new **, save as 2003 format, name, save to C: Windows ShellNew

2. Start-run-regedit

3. Go to hkey classes rootXLS 4, change the key value of filename to C: Windows ShellNew

Exit to complete the modification of the right-click new menu.

You can set the default save format:

In the Software option Save setting, saving this file as 97-03 is the default.

After you open the office, click on the upper left corner, there is a very beautiful office icon, select the word option in the menu, there is a save option in it, you open it and click on the "save the file in this format" drop-down menu there is an option is "word97-2003 format" click on it. In the future, all word documents will be automatically saved in this format. The same goes for other Office software.

You can do it on your computer. Save a 2003 template. Then use that template document every time. You'll see if it's going to be a little better.

There are many ways to do this, and here you are a few ways:

1. Install the Word system compatibility package and install it on the Word2003 machine, so that it can be used on the Word2003 machine.

2. Use word view2007 on office2003 computer to view, no.

The first method is usually used.

Open Word, then click the Office button, and there is "Word Options" below

In saving, the first line. "Save the file in this format" and select "word97-2003 format" OK

Because there are only two formats for Word, before the 2007 version, it was in doc format, and after the 2007 version, it was in docx format.

The same is true for Excel, the format was XLS before the 2007 version, and the XLSX format was used after the 2007 version.

PPT is the same, so I won't write it.

So your right-click New shows the 2007 and 2003 versions. Versions after 2007 include 2007, 2010, 2013, 2016, and have always been the same file format.

1. Open a word document and click Save as Text Template File (.).wpt）。

2. After clicking Save Template, save the template file to the desktop first.

5. After moving the template file, click New, and then select the template on the machine.

6. After clicking the template on the machine, select the template you just saved.

There are already a lot of style presets provided by Microsoft in the dialog box, you can check to see if there are any that meet the needs of the work, and you can directly click Apply. If not, click the "New Style" button in the bottom left corner to create a new style that meets the needs of your job.

In the new style dialog box, you can set the font, size, color, bold, italics, paragraphs, etc., after setting, you can enter the name of the style, so that you can find the application later, after you are sure, click confirm. This completes the creation of a new style.

I'm using Word 2003, select File -> Page Setup -> Set the margins you want and Other Settings -> the bottom left"Default"-> press"Yes"Just that...

Open the file, click Save As in the File menu, and select the save type as Excel Workbook (.).xlsx), i.e. in 2007 format.

You can install WPS Office on your office computer to easily read out documents for printing operations.

This can be solved by modifying the registry in a way:

1. Open the registry.

Method: Start -> run -> enter regedit ->OK.

2. Find the registry subkey.

hkey_current_user\software\microsoft\office\

3. Right-click on the blank space on the right, select "New -> dword value (d)", enter "extensionhardening" and click OK.

4. Right-click ExtensionHardening, then click "Modify (M)" and fill in "0" in the numerical data to confirm.

5. Close the registry and open the xls file again to see if the prompt is missing?

TRIVIA: ExtensionHardening sets the value of the data setting:

0: A warning message that does not check the file extension and file type and bypasses the function.

1: Check the file extension and file type. If they don't match, a warning message is displayed.

2: Check the file extension and file type. If they don't match, don't open the file.

This situation is likely to be caused by the fact that the computer has installed WPS and other office software before, and the registry has not been cleaned after uninstalling.

1.Press Win+R, run regedit, and open the registry.

2.Then find it under hkey classes root. xls and.

xlsx, open its subfolders, find all shellnew, place its filename all values without wps....Changed to C: Excel file inside the Windows ShellNew folder.

For example, mine is ", and F5 can be refreshed after modification.

Especially the first option of xls, you take a good look, the location of the point must be the wps folder, generally the location where wps has been installed, that is, there is nothing in this location, the system uses text documents to establish a ** by default, which leads to the inability to open.

This is also the case with my notebook, office2013, just solved the problem!

For this problem, I have encountered it before, it used to be XP to install Office2010, and then Win7 to install OFFIEC2013. Because many people in the unit are still using 2003, it is very troublesome to save it. Modified the registry according to the tutorial, word is no problem, but excel has a problem, the newly created excel97-2003 file is actually txt file saving, I solved it like this:

After the installation of Office2010 or 2013 is completed, install Office2003 again (only this can be done in reverse installation);

When the installation is completed in 2003, we can right-click to see that we can create 2 new formats of excel, but at this time choose to create a new excel (97-2003 kind), the opening method is to open with 2003, this is definitely not good, then we continue;

Create a new excel in 2010 or 2013 format, this time it prompts that it needs to be reconfigured, we select yes, office2010 (2013) will be reconfigured. After the configuration is completed, the word97-2003 and excel97-2003 menus you want will appear in the right click, try to create a new one, hehe, it's done.

Rest assured, this tutorial is my own groping and just how it was solved, absolutely correct. Because it is a problem that must be solved by work,If you choose to create a new 2013 format excel and then save it is definitely inefficient,I won't use it.,Other modifications to what registry are tried without success before researching.,You can try.。 If you have any questions, you can continue to ask me.

If the format of the new file is not an excel file, right-click to create a new one. XLS documentation.

This is not advisable and it is recommended to save it in 97-2003 format when saving.

I'm having the same issue.

It is advisable to modify the registry, and I have also helped others get it, you can refer to it.

on the method.

It's not a new version of the 03 version.,It should be saved as the 03 version.,Mine is the 07 version.,But the modification method should be the same.,For your reference.。

After installing the 03 version of Office, you can create a new Office 03. You can install Office 2003 at the beginning

This question has to trouble Microsoft's hometown. Mine can't be solved either. It can only be saved as 03 after creating a new one.

This is the default, you can choose "Save As" to select the 2007 version when saving, and you can do it.

Uninstall the previous 2003 version, it's better to reinstall 2007, the default is 2007.

Only the previous 03 version was uninstalled.