How to install wifi at home, how to install wifi at home?

Hello, if users want to use the wifi network, they first need to apply for a broadband, and then buy a wireless router.

You can realize wifi Internet access, and the installation and setting method of the router is as follows:

1.First connect the line, you can refer to the figure below.

2.After the line is connected, open a browser, enter the management address and management password of the router, and then enter the router background (the login address and login password of the specific router can refer to the manual or the label on the back of the router).

3.Once you've logged in to your back-office, select Quick Settings, then click Next.

4.Choose the way to access the Internet, usually ADSL users choose the first PPPoE, if you use other network service providers, then choose the following two according to the actual situation, if you don't know how to choose, directly select the first item to automatically select, convenient for novice operations, click next after selection;

5.Enter the password applied for from the network service provider, and go directly to the next step after entering.

6.Set the wifi password, try to make the alphanumeric combination more complicated, and it is not easy to be rubbed off the network.

7.After entering it correctly, it will prompt whether to restart the router, select Yes to confirm the restart of the router, and you can access the Internet normally after restarting the router.

Installing wifi is also very simple, but if you don't have equipment or technology, you can ask the operator to come and install it for you, as long as you buy her wifi equipment, he will keep it installed.

Here's how to install wifi at home:

1. The easiest and most commonly used way to install wifi is to pull a broadband at home, and then connect to a wireless router, basically there is no problem at home.

2. So if the home is rented, every room needs to have wifi, similar to the hotel style, we can choose portable wifi, installed on the wall network port.

3. There is also a more convenient USB flash drive wifi that can be plugged into the computer, and the wifi can be released anytime and anywhere, generally connected to the desktop.

4. The general model is stronger and more convenient to use, and it is best to install an AP, install an AP on each floor of the home, and you can freely switch to connect to the wifi at home at any time.

5. Now the home is mainly AP or wireless router, it can also be the laptop's own wifi signal, can be a mobile phone 4G hotspot can release wifi, it is recommended that the general suite living room wireless router, bedroom can be portable wifi.

Precautions for installing wifi

1. Pay attention to the placement of the router.

When we install the router, we should pay attention to the location of the router, do not place it in the corner or in a place with many blocking objects, in addition to the skin to resist this, in order to prevent other equipment from interfering with the signal of the router, keep the router away from microwave ovens, wireless mice and other equipment.

2. Make sure the physical connection is normal.

When installing, it is necessary to distinguish between the LAN interface and the WAN interface, and if the connection is successful, there will be a corresponding indicator light on the router.

Home wifi installation requires the use of a wireless router, the wireless router can be purchased by yourself, and then the wireless router is set up to use wifi normally.

Here's how to set up your wireless router:

1. According to the example figure below, connect the network cable, connect the network cable from the cat to the WAN port, and connect the computer to the LAN port. Be careful not to connect incorrectly.

<>2. Enter the administrator password in the input box and click OK. Generally, the default administrator password is admin.

3. After the administrator password is entered, the login ID interface will pop up, if not, you can click the temporary login in the upper left corner of the login ID interface, as shown in the figure. If you are using a router of another brand, you can skip this step without this interface.

<>6. Enter the broadband and password, and click to connect.

<>8. You can set the wireless name and wireless password by yourself, and after entering, click Save below. In this way, the wifi can be used normally, use the mobile phone to turn on the wifi, connect to the wifi, and enter the set wireless password to use it normally.

Precautions for the use of wifi:

1. Don't be too far away from the router when using, too far away will cause the wifi network connection to be unobstructed, and the network speed will slow down.

2. The place where the router is placed should not be separated from the wall of the place where the wireless network is used too much, the wall will reduce the strength of the wifi network, the more walls, the worse the signal, and the slower the network speed.

3. Don't break the antenna when using the wireless router, the antenna of the wireless router is the root of the wifi network, and the wifi cannot spread normally after the antenna is broken.

4. When using a wireless router, you can place the router in a high place to help the spread of wifi signals.

5. The more antennas the router has, the greater its coverage, which can be purchased according to individual needs.

6. When the distance from the router is far, the wifi signal is weak, and the connection cannot be reached, you can use a wireless router to do wireless bridging to expand the wifi coverage.

7. When the wifi network is not available, first check whether the network is disconnected, and check whether the indicator lights of the cat and router are lit correctly.