Is a factory floor good for a sweeper? Why do factories use sweepers?

Hello, I think the factory workshop is not very suitable for sweepers, because there are generally a lot of sundries in the workshop, which will affect the life of the sweeper.

If you encounter similar problems in the future, you can follow the following ideas to solve them:

1. Finding problems: often living in the world, always in these kinds of contradictions, when some contradictions are projected into consciousness, the individual only finds that he is a problem, and asks to find a way to solve it. This is the stage where the problem is discovered.

From the perspective of the stage of problem solving, this is the first stage and the premise of solving the problem.

2. Analyze the problem: In order to solve the problems found, it is necessary to clarify the nature of the problems, that is, to figure out what contradictions there are, which contradictions, and what is the relationship between them, so as to clarify what results the problems to be solved, the conditions that must be met, the relationships between them and what conditions have been met, so as to find out the important contradictions and key contradictions.

3. Put forward hypotheses: on the basis of analyzing the problem, put forward hypotheses to solve the problem, that is, the solution that can be adopted, including what principles and specific ways and methods to take, but all of these are often not simple and ready-made, and there are various possibilities. However, putting forward hypotheses is the key stage of problem solving, and correct assumptions lead to the smooth solution of the problem, while incorrect and inappropriate assumptions lead to detours or lead the solution of the problem astray.

4. Verify the hypothesis: The hypothesis only proposes n possible solutions, and there is no guarantee that the problem will be solved, so the last step in problem solving is to test the hypothesis. In either case, if the test does not produce the expected result, a new hypothesis must be proposed and tested again until the correct result is obtained, and the problem is not solved.

It depends on what your factory workshop produces, as long as there are no large garbage objects in the workshop, you should be able to use a sweeper.

The factory floor is not suitable for sweepers, because there is not only dust on the factory floor, but also a small amount of waste products and oil such as small and large particles, and the sweeper cannot be cleaned.

Whether the factory floor is suitable for a sweeper depends on the actual situation. It is not possible to generalize.

First of all, we have to look at how this site is, if the site is large or it can be used when the robot turns away, we also need to consider the degree of this garbage to be used.

In other words, if the site is not large enough, if there is too much garbage and too dirty, it is not suitable to use a grass sweeper, or it is more appropriate to clean it manually.

The application of the sweeper still has a certain range, or there are certain conditions and defects, some are suitable for use, some are not suitable for use, it is best to be suitable for the family, the factory, to consider the actual situation to see if it can be used.

As long as the factory walkway has a certain width and is relatively straight, it can be cleaned with a sweeper.

Nowadays, sweepers are widely used, there are many manufacturers on the market, product models and formats, and there are countless brand manufacturers.

The sweeper is electrically driven, energy-saving and environmentally friendly, and does not need to be pushed by hand when used, it is a one-button start, simple to operate, and the cleaning effect is good, time-saving and labor-saving, durable, etc., and is loved by industry, factories, factories, workshops, etc., and is widely used in various industries.

1.A small factory with a working area of 2000 square meters can be pushed by hand, the cleaning area is small, and the workload is relatively small, but it also depends on the difficulty of cleaning.

2.For medium-sized factories with an area of 2000-8000 square meters, it is recommended to use a ride-on sweeper, which can be cleaned with one machine and one manual effort, and the work efficiency is high.

3.In a large factory area of more than 10,000 square meters, the cleaning effect of the walk-behind sweeper cannot meet people's needs for environmental quality, so it is necessary to choose a medium-sized or large sweeper with higher efficiency.

Generally, in large factories, in addition to the use of workshops, outdoor public areas also need to be cleaned by sweepers, so industrial sweepers are important cleaning facilities in factory workshops.

I think the sweeper is not suitable for the workshop in the factory, the workshop is dirty and some places are narrow and difficult to move, and it is only suitable for small areas and not very dirty places.

This depends on what level your factory workshop is, there is no way to do it at low level, because low level means chaos, and it is completely unnecessary, and high level is not needed, not to mention the sweeper in that kind of dust-free workshop, nothing can be done, only those that are not up or down are suitable.

Yes, as long as the factory floor can turn the sweeper away.

No, there are a lot of tiny parts.

The sweeper is suitable for home use. Not suitable for use on the factory floor.

There is a dedicated workshop sweeper.

It depends on whether it is messy or not, and if it is too messy, it is better to sweep it yourself.

I think the machinery in the factory is complicated and people come and go, so as not to cause unnecessary trouble.

It depends on what kind of job you do, and then you can see if the sweeper is suitable.

What kind of sweeper is suitable for the factory floor?

Answer: What kind of sweeper is used in the factory workshop depends on the area of the workshop, the type of dust and garbage in the workshop, and so on.

2020-08-07 Author: 2 San Benno sweepers.

Why do factories and workshops need sweepers?

Q: Why do factories and workshops need sweepers?

A: Why do factories and workshops need sweepers? Not only can it clear the ground quickly, but it can also save the business labor and a lot of cleaning expenses.

Next, let's look at the advantages and features of a sweeper. Sweeper 1Adaptable, designed for factory property, ground environment, large slope of garbage and various environmental cleaning.

It is widely used in residential and municipal roads.

Which industrial sweeper is suitable for workshop use.

1. The factory area and workshop are generally larger, and the ride-on sweeper is more labor-saving, and the electric type is quick to use and shorter. 2. Built-in powerful dust control system, stronger dust suction capacity. 3. Adopt advanced high-performance large-capacity maintenance-free battery, no leakage, zero.

2020-05-25 By: 11 new integrity properties.

What kind of sweepers are used in factories?

A: The common feature of different factories is that the area is large, so it is difficult to clean the floor without leaving dead corners and dust. It is too waste of financial resources and manpower to clean by hand, so you can only use a sweeper to clean.

Today, Kuaiba will take you to know the sweepers commonly used in factories and their advantages and characteristics. KB-SD1280 small sweeper is mainly used in factory workshops and workers.

It has become a trend for factories to use small electric sweepers, and factory floors, warehouses and other places are very suitable. If your factory is facing the problem of high cleaning costs of cleaning, labor, and manpower, try a small electric sweeper.

As we all know, due to the large number of workers, large area, and large goods on the factory floor, a large amount of dust and garbage is generated every dayDust, scrap metal, small screws, and paper scraps are common solid waste in factoriesCleaning up these dust and garbage by hand requires a lot of labor, time, and cost

The sweeper can not only quickly sweep the ground, but also save manpower and a lot of cleaning costs for enterprises.

Nowadays, more and more factories are using electric sweepers, which replace manual cleaning work in the factory area. Why is the daily cleaning of the factory changing from manual to electric cleaning?

There are several reasons for this:

1.The electric sweeper has high work efficiency and can replace more than a dozen cleaners to clean a large area.

2.Cleaning is more careful, and you can clean up the leaves, stones and other garbage in the dead corner, and there will be no garbage missing.

3.Less dust. Equipped with a powerful vacuum system, it curbs the flying of dust when sweeping the floor.

4.Easy and safe to operate. Workers can quickly learn how to use it and with a high safety factor.

Nowadays, the problem of floor cleaning in factories has always been a headache, there is a lot of garbage in the plant, and there are also many factories with more dusty garbage, and the traditional manual cleaning is increasingly unable to meet the cleaning needs in the factory. The production and use of electric sweepers will completely solve this problem.

The floor area of the factory is relatively large, and if manual cleaning is used, it will increase the labor force and be inefficient. Using sweeper skills to reduce labor also increases efficiency.

The area of the factory is very large, and it can save a lot of money by replacing it with a sweeper, and there is no need to invite workers to sweep it, as long as it uses electricity, the electricity bill can be swept away.

With the easing of the epidemic, various factories have begun to resume work one after another, and in the new year, a new beginning, cleaning and sanitation are naturally indispensable projects. For large factories, manual cleaning is obviously not realistic, at this time, the factory sweeper known as the cleaning artifact should make its debut.

Not necessarily, precautions when charging the sweeper:1. It is best to have a special person responsible for the charging of the factory sweeper (the charging of the sweeper is finally charged by the personnel trained by the professional sweeper to avoid unnecessary failures caused by random charging);

2. It is forbidden to charge in places that do not meet the charging requirements of factory sweepers (cable: copper wire of more than 4 square meters, 16A socket).

3. It is forbidden to use the factory finger sweeper for cleaning while charging;

4. It is forbidden to pull out the charger handle during the charging process of the factory sweeper; (First open the power cord of the factory sweeper charger, and then unplug the charging handle, you can't pull the charging cable directly).

5. It is forbidden to charge the factory sweeper on the steep ground;

6. Forbidden to stop in a humid place to charge the factory sweeper.

Electric sweepers, just look at the name, you know that they can be used in the workshop, otherwise they will not appear on the market.

Factories and workshops need sweepers because:

1. It has a large area, many cleaning employees need to be hired, and the cost is high. Buying or renting a sweeper can basically be done by a cleaning staff.

2. And many workshops are cleaned more times in the morning, noon and evening, and the use of sweepers is faster and more efficient.

3. In addition, there are workshops and factories that belong to dust, sawdust, and processing, which are not easy to clean at all, and need to be cleaned many times, which is very time-consuming and may not be able to be cleaned.

Because the factory and workshop are relatively large, if the labor intensity of manual sweeping is high and the efficiency is low, now we pay attention to efficiency and artificial intelligence, of course, we must use sweepers with high efficiency.

With the progress of society and the development of science and technology, some labor force is now replaced by machines, saving labor and time, and it is cost-effective to invest at one time.

Furniture factory! Furniture factories are the most dusty, and sweepers should be needed there.

Electric sweepers have many advantages, and they are more energy-efficient than manpower. Let's make a comparison and see what advantages electric sweepers have compared with manual work.

First of all, the sweeping vacuum system of the electric sweeper is equivalent to 6-40 times the labor;

secondly, reduce the degree of dust pollution to the environment (save time and financial resources, reduce manual cleaning of product appearance, cleaning and maintenance of machinery and equipment, and periodic environmental sanitation work, etc.);

Thirdly, the electric sweeper can improve work efficiency and improve the operator's work enthusiasm at the same time; Finally, Xinfa reminds you that a good and clean environment not only improves the corporate image, but also is more conducive to the construction of the enterprise and the enthusiasm of the employees.

The factory workshop area is large, cleaning is not easy, and the sweeper, as a new type of cleaning equipment, has high cleaning efficiency and high safety, but there are many people who do not know much about the sweeper, and even know nothing about the function and use of the sweeper.

The sweepers used in different types of factory workshops are also different, such as the factory workshop has a lot of oil on the ground, and the sweeper is used to clean the ground, and the ground cannot be thoroughly cleaned without detergent.

Factory sweepers.

If there are not many products in the workshop, the area is not low, the maintenance cost of the hand-pushed sweeper is low, convenient and fast: it is suitable for small factories, small supermarkets, shopping centers, airports, railway stations, bus stations, subway stations, parking lots, hotels, hospitals, schools, office buildings, exhibition halls, ** institutions, cleaning companies, etc.

For a relatively large area, 10,000-20,000 square meters of area with a driving sweeper will greatly improve work efficiency, driving sweeper is suitable for ceramic tiles, mirror stone, PVC, epoxy, emery, polished cement and other hard ground surface cleaning, is an ideal tool for cleaning large warehouses, stores, workshops, exhibition halls, venues and other venues, more suitable for open-air squares, pedestrian streets, etc., driving sweepers set brush and dry in one, front double brush brush or cleaning pad, can effectively clean the stubborn oil stains on the ground, stains, dirty water, mud, etc.; The rear round water suction device can effectively absorb the sewage, and the ground passed by the sweeper can achieve the effect of drying and cleaning without residue.

The ride-on sweeper is simple to operate, and the brush plate is automatically lifted and lowered, which is easy to learn; Flexible turning, clean without leaving dead corners, light operation; Greatly improve work efficiency.

The choice of sweeper in the factory is actually a very simple thing: the main grasp is the need to clean the space, the ground condition, no matter how the sweeper changes, is to liberate the labor force, free hands, mechanized operation to improve work efficiency, but also in line with the development and needs of the current era.