The iphone has an E on it, but it can t go online, what s the situation? How should I set it up?

The method is as follows: 1

1. Make sure that the Internet access function of the mobile phone is enabled by the mobile phone operator.

2. If there is no application, you need to go to the local business hall to open the Internet function and handle the traffic.

2. Set up Internet access.

1. Go to Settings - General - Network.

2. Set the cellular data to "On".

3. Cellular data network settings.

4. Cellular data--APN: CMNet username and password are not filled.

MMS--APN: The CMWAP username and password are not filled.

China Mobile).

MMS**: Maximum MMS message size: 51200

The Internet access setting method of China Unicom is similar to that of mobile Internet access) 1. Enter "Settings - Network - Enable 3G".

2. Turn on data roaming;

3. Cellular data network APN: 3GNET or 3GWAP or UNINET.

3. Check the signal strength of the mobile network in your location, if it is too poor, you will not be able to access the Internet normally.

Turn on cellular data and still can't get online:

1.Restart your iPhone.

2.Settings-General-Restore above, check the WAP access point profile if there is a suggestion to remove.

3.To reset network settings, tap Settings> General > Restore, then scroll down and tap Reset Network Settings.

4.If you put this SIM card in another mobile phone, whether you can access the Internet, and whether you can go to the Internet when you put other SIM cards in this iPhone, so as to further rule out whether it is a problem with the mobile phone or the SIM card.

5.To reset all settings, tap "Settings> "General" > "Reset", then scroll down and tap "Reset All Settings".

6.If you still can't get online, and confirm that it is a problem with your phone, you can back up your data, turn off Find My iPhone, and then restore your iPhone system.

As long as I turn on the cellular data, I can surf the Internet without setting up anything else.

You empty your settings and try a different SIM card.

Click on the blank at the back of the APN and he'll let you fill it in

<> the reasons why the iPhone has always been an e-network and how to deal with it are as follows:

1. The current geographic location signal is not good, it is recommended to walk around, turn on and off the "airplane mode", and then try to use the network.

2. It may be that there is a problem with the SIM card, it is recommended to go to the local business hall for consultation, or replace the SIM card with a new mobile phone.

3. There may be a problem with the mobile phone network settings, and it is recommended to restore the network settings. The specific operation is as follows: enter the "Settings" interface of the mobile phone; Enter the "General" interface; Enter the "Restore" interface; Click "Reset Network Settings".

This operation will only restore the network and will not affect the personal data on the phone, so please feel free to operate.

4. It may be that there is a problem with the current system firmware of the mobile phone, it is recommended to redo the system firmware of the mobile phone, or update and upgrade the new version of the mobile phone system.

5. It may be a hardware problem with the mobile phone, it is recommended to send it to the mobile phone store or after-sales service, check it, and then try to repair it.

The e-network on the Apple mobile phone is caused by the wrong network settings, and the solution is:

1. After unlocking the iPhone and entering, tap the phone's settings icon.

2. In your phone's settings, select "Cellular."

option to enter.

3. Next, after entering the settings interface, click "Cellular Data Options" to enter.

4. After entering the settings interface, click on the option of "Start 4G".

5. After clicking, set the start 4G to "Voice and Data".

Summary. The iPhone mobile phone shows [e-network] due to the failure of the mobile phone network.

Specific resolution steps:

1. After unlocking the iPhone, the network status in the upper left corner of the screen shows the [e-network] status, which is caused by the abnormal mobile phone network, open [Settings].

What's going on with the emergence of e-network on Apple's mobile phone?

The iPhone mobile phone shows [e-network] due to the failure of the mobile phone network. Specific solution steps: 1. After unlocking the iPhone, the network status in the upper left corner of the screen shows the [e-network] status, which is caused by the abnormal mobile phone network, open [Settings].

2. After jumping to the detailed option list of [Settings] on your phone, find the [General] function and turn it on.

<> the reasons why the iPhone has always been an e-network and how to deal with it are as follows:

1. The current geographic location signal is not good, it is recommended to walk around, turn on and off the "airplane mode", and then try to use the network.

2. It may be that there is a problem with the SIM card: it is recommended to go to the local business office for consultation, or replace it with a new Shenmo mobile phone SIM card.

3. There may be a problem with the mobile phone network settings, and it is recommended to restore the network settings. Here's how:

Enter the "Settings" interface of your phone; Enter the "General" interface; Enter the "Restore" interface; Click "Reset Network Settings". This operation will only restore the network and will not affect the personal data on the phone, so please feel free to operate.

4. It may be that there is a problem with the current system firmware of the mobile phone, it is recommended to redo the system firmware of the mobile phone, or update and upgrade the new version of the mobile phone system.

5. It may be a hardware problem with the mobile phone, it is recommended to send it to the mobile phone store or after-sales service, check it, and then try to repair it.

Precautions for the use of Apple mobile phones:

1. Avoid the wind and sun on the mobile phone, which will darken the color of the Apple mobile phone for a long time.

4. Charge the mobile phone in time when the battery is less than 30%, which can prolong the life of the mobile phone.

Refer to the content on the filial piety silver Encyclopedia-iphone

Summary. If the Apple mobile phone keeps displaying e, first of all, you must rule out whether it is your own environment and poor network signal, and test it with the mobile phones of other partners. If the other party can access the Internet normally, but they can't, then we can go into the settings to see if the 4G switch is turned off.

1. Enter the desktop of the phone, find the [Settings] icon, and click to enter. 2. After entering the settings interface, find the [Cellular] option and click to enter. 3. Click [Cellular Data Options].

4. Here we can see that there is a [Off] display next to it, click the [Enable 4G] option. 5. After entering, check [Voice and Data]. If it is not for the above reasons, it is recommended to restart the phone or try it in a different environment.

What's going on with the Apple mobile phone network showing e?

If the Apple mobile phone keeps displaying e, first of all, you must rule out whether it is your own environment and poor network signal, and test it with the mobile phones of other partners. If the other party can access the Internet normally, but they can't, then we can go into the settings to see if the 4G switch is turned off. 1. Enter the desktop of the phone, find the [Settings] icon, and click to enter.

2. After entering the settings interface, find the [Cellular] option and click to enter. 3. Click [Cellular Data Options]. 4. Here we can see that there is a [Off] display next to it, click the [Enable 4G] option.

5. After entering, check [Voice and Data]. If it is not for the above reasons, it is recommended to restart the phone or try it in a different environment.

If the Apple mobile phone keeps displaying e, first of all, you must rule out whether it is your own environment and poor network signal, and test it with the mobile phones of other partners. If the other party can access the Internet normally, but they can't, then we can go into the settings to see if the 4G switch is turned off. 1. Enter the desktop of the phone, find the [Settings] icon, and click to enter.

2. After entering the settings interface, find the [Cellular] option and click to enter. 3. Click [Cellular Data Options]. 4. Here we can see that there is a [Off] display next to it, click the [Enable 4G] option.

5. After entering, check [Voice and Data]. If it is not for the above reasons, it is recommended to restart the phone or try it in a different environment.

No way. No way.

Restoring network settings also doesn't work.

Restoring network settings also doesn't work.

Is it that the network is not good where you stay.

It's normal for Apple to have a bad signal.