DDR400 memory working frequency problem!

Now the memory is DDR, double-sided memory, which is the actual frequency of the memory

It is very normal for the CPU to burn at 50 degrees, and it is generally at this temperature that it will burn in the 90s.

Kiss! Hello, happy to answer your <>

The pro-memory frequency is 3200 but only 2400 for the following reasons: if your motherboard and CPU support memory overclocking, you can directly pull the BIOS to 3200 frequency and use it.

If not, then turn on XMP and adjust the frequency to the maximum frequency that your CPU can support. The reasons may be: 1. Overclocking to 3200MHz.

The base frequency is 2400MHz, which can be overclocked to the memory module mix, the motherboard does not support 3200MHz, and the automatic frequency is reduced to 2400MHz, so the base frequency is displayed at 2400MHz. Memory is an important part of a computer, also known as internal memory and main memory, which is used to temporarily store computing data in the CPU and exchange data with external memory such as hard disks. It is the bridge between the external memory and the CPU, and all the programs in the computer are running in memory, and the strength of memory performance affects the overall performance of the computer.

As soon as the computer is running, the operating system will transfer the data that needs to be calculated from the memory to the CPU for calculation, and when the calculation is completed, the CPU will send the result. The operation of memory determines how fast or slow the computer as a whole runs. Hope mine can help you <>

Do you have any other questions?

Summary. Hello! Let me answer the <> for you

If the memory frequency is low, it may be because the BIOS settings of the computer are incorrect, it is recommended to refer to the computer manual to reset the memory frequency in the BIOS; If the memory frequency is still low after resetting, you need to send the computer to a professional repair department for memory testing and replacement. The operation steps are as follows: 1. Refer to the computer manual and find the BIOS setting menu; 2. Enter the settings menu and locate to the memory frequency setting item; 3. Set the value again and save the settings; 4. Restart the computer and check whether the memory frequency has changed.

The memory frequency is 3200, but only 2400

Hello! Let me answer the <> for you

If the memory frequency is low, it may be because the BIOS settings of the computer are incorrect, it is recommended to refer to the computer manual to reset the memory frequency in the BIOS; If the storage frequency of Neiling is still low after the resetting, you need to send the computer to the professional dimensional ruler repair department to test and replace the memory. The operation steps are as follows: 1. Refer to the computer manual and find the BIOS setting menu; 2. Enter the settings menu and locate to the memory frequency setting item; 3. Set the value again and save the settings; 4. Restart the computer and check whether the memory frequency has changed.

It is recommended to refer to the computer manual first, find the BIOS setting menu in the manuscript, enter the menu, locate the memory frequency setting item, reset its value, and save the settings; If you still can't change the memory frequency, it is recommended to send the Dianzhou cracked filial piety brain to a professional maintenance department for testing and memory replacement.

DDR4 generally runs at 2133MHz and adopts a new circuit architecture, with a maximum height of 3200MHz.

DDR4 is theoretically twice as fast on core frequencies as the previous memory compared to the previous memory. DDR4 has a more reliable transmission specification, which further improves data reliability, and the operating voltage is reduced to a more energy efficient.

Extended data: DDR 4 memory maximum frequency ruler Chang may be as high as 4266MHz, voltage may drop to even.

Samsung said that this DDR4 memory uses virtual open-leak technology that once appeared on high-end memory particles, and the leakage rate when reading and writing data is only half that of DDR3 memory.

At the end of December 2010, a sample of this DDR4 memory module was provided to a controller manufacturer for testing, and it is planned to work closely with a number of internal memory manufacturers in the second half of 2011 to help Jedec organize the development of DDR4 standards and specifications, which is expected to be put into commercial use in 2012.

Summary. The memory frequency is 3200, but only 2400, which is a relatively common problem. There is a gap between the memory frequency, which refers to the transfer rate of the memory module, and 2400, which refers to the rate at which the memory is actually running.

The memory frequency is 3200, but only 2400, which is a relatively common problem with Sun files. There is a gap between the memory frequency is the transmission rate of the memory module and the rate at which the memory is actually running.

One of them could be because the motherboard doesn't support 3200 frequency memory. If the motherboard only supports 2400 frequency memory, then even if 3200 frequency memory is plugged in, it will only run at 2400 frequency.

The memory frequency is also limited by the orange CPU. If the CPU does not support the 3200 frequency memory, then even if the motherboard supports it, the memory can only run at the highest frequency supported. Balance the Chaos Group.